Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Kennesaw, GA
Gate motor and opener repair in Kennesaw usually means one of two things: a swing gate thrown out of plumb by shifting red clay soil, or an operator from the 1990s HOA build-out that has finally reached the end of its service life. We diagnose both, price both in writing before any work starts, and leave a photo record of every adjustment we make. Most motor replacements on Kennesaw driveway and subdivision gates run between $850 and $1,900 depending on the brand and whether the arm bracket survived the failure. Call (928) 260-0864 when your gate stops responding, and a live person answers.
Why Kennesaw Homes Are Different
Kennesaw’s gate inventory skews older and more uniform than most Atlanta suburbs. The master-planned subdivisions built along Barrett Parkway and Stilesboro Road between roughly 1990 and 2010 produced hundreds of decorative aluminum and wrought-iron driveway gates set into stone or brick pillars. Those pillars were poured into North Georgia red clay, which expands and contracts aggressively with seasonal moisture. As the pillars settle over two or three decades, the hinge welds and operator brackets absorb stress they were never designed for. We regularly find swing gates in Legacy Park, Barrett Greene, and the neighborhoods east of I-75 where the gate leaf has dropped a full inch or more, dragging on the latch post and forcing the motor to work against the weight of the gate itself.
Winter ice storms compound the problem. Cobb County gets ice more reliably than snow, and a frozen hydraulic or electromechanical operator is a common January call. When a vehicle tries to force a frozen entry gate, the aluminum arm often snaps before the motor does. The repair then becomes two jobs: a new operator and a new articulated arm. Kennesaw’s HOA-heavy landscape also means many of these gates are shared infrastructure, so the repair conversation often involves a property manager, a board member, and a written scope of work that outlives whoever attends the meeting. That fits how we work. We document everything and price it before the first tool comes off the truck.
Our Main Kennesaw Services
Two services account for most of the calls we run in Kennesaw: repair of failed gates and installation of new ones. Here is what each involves locally.
Gate Repair in Kennesaw
Repair work in Kennesaw splits between mechanical failures (hinge welds, bent posts, snapped arms) and electrical failures (dead motors, failed loop detectors, misaligned photo-eyes). The aging subdivision gates along Barrett Parkway frequently need both at once, because a gate that has sagged for years will eventually burn out the motor trying to move it. We diagnose the full system, not just the symptom. Read more about how we approach Gate Repair in Kennesaw.
Gate Installation in Kennesaw
New gate installation in Kennesaw usually means either a replacement for a 25-year-old subdivision gate or a custom driveway gate on a newer Town Center property cut into a sloped red clay lot. Both require accounting for soil movement, drainage, and the electrical run from the house or clubhouse panel to the operator. We measure, provide a written price, and schedule the work in clear phases. See how we handle Gate Installation in Kennesaw.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Kennesaw
Gate motor and opener failures in Kennesaw follow a pattern we know well. The 1990s-era operators installed on subdivision entrance gates, many of them LiftMaster SL595 units, are now discontinued and parts-scarce. When those fail, a repair is often impossible and the conversation becomes about conversion: adapting the existing gate and posts to a modern operator rather than tearing everything out. On residential driveway gates, the failure is more often mechanical stress from red clay shifting the posts, which misaligns the gate leaf and forces the motor to stall under load. We stock conversion kits and carry parts for nine major automation brands, so the first visit usually ends with a working gate, not a waiting list. Read more about our full Gate Motor & Opener capabilities.
Motor Installation
Signs you need it
The motor hums but the gate barely moves, trips its internal breaker, or has been declared obsolete by a competitor quoting a full gate replacement.
What it costs in Kennesaw
Motor installation in Kennesaw typically runs $950-$2,200, with light residential units starting around $850 and heavier HOA-grade operators at the upper end.
How we do it
We remove the failed operator, install the new unit on the existing pad or bracket, set the travel limits, wire the safety edges and photo-eyes, and photograph every connection before testing.
Motor Repair
Signs you need it
The gate opens but refuses to close, reverses mid-cycle, or the motor runs without moving the gate at all.
What it costs in Kennesaw
Motor repair in Kennesaw usually falls between $150 and $450, with capacitor replacements at the low end and limit-switch or gear repairs higher.
How we do it
We open the operator housing, test the capacitor and limit switches, replace the failed component, reset the travel, and document the readings before closing it back up.
What Gate Motor & Opener Costs in Kennesaw
| Item | Typical range in Kennesaw |
|---|---|
| Motor installation | $850-$1,900 |
| Motor repair | $150-$450 |
| Motor replacement | $950-$2,200 |
How long does a gate motor last in Kennesaw?
Most operators last 10-15 years here, but the red clay soil that shifts posts can cut that to 7-10 on a swing gate that gets pulled out of alignment. Ice storms and forced operation during freezes are the other major killers. Call (928) 260-0864 and we’ll assess what is still serviceable.
Can you convert an old Kennesaw HOA gate motor to a new brand?
Yes, and we do it regularly on pre-2005 subdivision gates where the original operator is discontinued. A conversion kit adapts the existing posts and gate leaf to a current motor, keeping replacement costs far below a full gate rebuild. Call (928) 260-0864 for a written quote.
Gate Access Control in Kennesaw
Gate access control in Kennesaw means the keypad, remote, phone, or card system that tells the gate motor who is allowed through. On the 20- to 30-year-old HOA entrance gates along Barrett Parkway and Stilesboro Road, the limiting factor is often the original loop detector or an old phone-entry board that no manufacturer still supports. On newer Town Center homes, the call is usually about integration: making the driveway gate work with a Ring doorbell, a phone app, or a HomeKit setup. We handle both ends of that spectrum and document every wiring change. Our full Gate Access Control scope covers keypads, remotes, phone entry, card readers, and video intercoms.
Keypad Entry
Signs you need it
The keypad works intermittently, fails in cold weather, or the buttons have worn so badly that codes no longer register.
What it costs in Kennesaw
Keypad entry replacement in Kennesaw typically runs $250-$850, depending on whether it is a hardwired HOA unit or a wireless residential keypad.
How we do it
We replace the keypad, set the entry codes, wire it into the existing operator, and test every code before photographing the final configuration.
Video Intercom
Signs you need it
The video feed is blank, the audio crackles, or the call button rings nothing even though the gate itself still opens by remote.
What it costs in Kennesaw
Video intercom installation in Kennesaw lands between $900 and $3,000, with camera quality, app integration, and whether power has to be run from the house driving the spread.
How we do it
We install the intercom panel, run the power and data lines, configure the app or monitor, and test a live call from the gate to the house before wrapping up.
What Gate Access Control Costs in Kennesaw
| Item | Typical range in Kennesaw |
|---|---|
| Keypad entry | $250-$850 |
| Video intercom | $900-$3,000 |
| Access control system | $1,200-$5,000+ |
Can you add a keypad to an existing Kennesaw driveway gate?
Most of the time, yes. The gate operator needs a compatible receiver or a wired input terminal, and we check that before quoting. The written price covers the keypad, wiring, programming, and testing. Call (928) 260-0864 to confirm compatibility.
Will a video intercom work with my phone if I work in Atlanta all day?
Yes. Most modern video intercoms push the call to a phone app, so you can see and speak to whoever is at the gate from anywhere. We configure that during installation and show you how it works before we leave.
Gate Parts & Welding in Kennesaw
Gate parts and welding in Kennesaw is where the red clay does its work. Every year of moisture cycling nudges gate posts a little further out of true, and the result shows up first in the hinge welds and the operator bracket. We weld cracked hinge plates, replace posts that have rotted or shifted, straighten bent gate rails, and build custom brackets when the original part is no longer manufactured. A good rule of thumb: if the gate is dragging, do not keep running the motor against it. That is how a $200 weld becomes an $1,800 motor. Our Gate Parts & Welding work includes hinge replacement, post replacement, rail repair, custom welding, and gate rollers.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground at the latch side, or the hinge welds show fresh cracks when the gate is moved by hand.
What it costs in Kennesaw
Hinge replacement in Kennesaw tends to run $300-$850, with simple barrel hinges at the low end and ornamental or custom-fabricated hinges higher.
How we do it
We cut away the old hinges, position the gate back to level, weld in the new hardware, and photograph the completed welds with close-ups of the penetration.
Post Replacement
Signs you need it
The post leans visibly, the gate gap opens wider at the bottom, or the post base shows rust blooming through the paint where water has pooled against the clay.
What it costs in Kennesaw
Post replacement in Kennesaw ranges from $450-$2,000, with stone or brick pillar repair pushing above that when the masonry itself has cracked.
How we do it
We dig out the old post and its concrete footer, set a new post in a deeper pour with drainage gravel at the base, and re-hang the gate once the concrete has set.
What Gate Parts & Welding Costs in Kennesaw
| Item | Typical range in Kennesaw |
|---|---|
| Hinge replacement | $300-$850 |
| Post replacement | $450-$2,000 |
| Custom welding | $250-$1,800 |
Can you repair a welded aluminum gate in Kennesaw, or does it have to be replaced?
Aluminum gates can almost always be welded if the section is not completely corroded through. We TIG weld aluminum on site and match the finish as closely as the original coating allows. Call (928) 260-0864 and send a photo; we will tell you honestly.
Do you fabricate parts for gates that are no longer made?
We do. Many Kennesaw subdivision gates were built before 2005 with hardware that is now discontinued, so we fabricate replacement brackets, roller plates, and hinge mounts in the field. You get a drawing and a written price before any fabrication begins.
Brands We Service in Kennesaw
We service Viking, Ghost Controls, DoorKing, and Elite operators, among the nine major automation brands we carry parts for. For discontinued units on older Kennesaw HOA gates, we stock conversion kits and can usually quote a drop-in replacement without waiting on a manufacturer that no longer exists. See our brands for the full list and what we stock locally.
Pricing for Gate Repair in Kennesaw, GA
| Service | Typical range in Kennesaw |
|---|---|
| Motor installation | $850-$1,900 |
| Motor replacement | $950-$2,200 |
| Motor repair | $150-$450 |
| Keypad entry | $250-$850 |
| Access control system | $1,200-$5,000+ |
| Video intercom | $900-$3,000 |
| Hinge replacement | $300-$850 |
| Post replacement | $450-$2,000 |
| Custom welding | $250-$1,800 |
Two things push prices up in Kennesaw more than anywhere else we work: red clay post movement that requires re-setting pillars before any mechanical repair makes sense, and discontinued HOA operators that need conversion rather than a simple swap. Whatever the number is, it is written down and handed to you before any work begins. You agree to it, or we do not start.
Neighborhoods We Serve in Kennesaw
We cover Kennesaw from the Town Center corridor north to the county line, and every HOA subdivision in between. Most calls get a same-day or next-day dispatch, with emergency response available around the clock.
- Legacy Park
- Barrett Greene
- Stilesboro
- Sedella
- Due West
Service Area - Cities Near Kennesaw
Our crews also run gate repair calls in the surrounding Cobb and Cherokee County communities. We regularly serve Acworth, GA, Marietta, GA, and Woodstock, GA, and we cover Smyrna, TN as part of our broader service footprint.
Serving Kennesaw, GA - Our Local Coverage Area
We’re based in the Kennesaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kennesaw
Usually yes, and the HOA board or property manager will want a written scope of work and a firm price before approving the spend. That is exactly what we provide on every visit: a documented diagnosis, a line-item price, and a photo record the board can keep on file.
Most calls in Kennesaw get a technician dispatched the same day or the next morning, depending on the time of the call and the severity. Emergency calls for a gate stuck open or a vehicle trapped inside run 24 hours a day. Call (928) 260-0864 and a live person answers.
It can, which is why we address the cause when we replace a post: a deeper footer, drainage gravel at the base, and sometimes a larger diameter post to resist movement. We photograph the footer before backfill so you can see exactly what was set in the ground.
If your gate in Kennesaw is acting up, call us at (928) 260-0864. We will name the problem, price the fix in writing, and leave you with a photo record of everything we touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kennesaw Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.