Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for New York City Homeowners
A gate that won’t open, drags across the driveway, or refuses to close is more than an inconvenience. It’s a security gap on your property. Vance Gate Repair has serviced and installed more than 22,000 gates since 2014, and we work across all five boroughs of New York City, plus Gate Repair in Huntington Park. Same-day service is available for most repair calls. Call (928) 260-0864 and a live person answers, not a voicemail tree.
Adrian Vance founded this company out of commercial access-control work. That means every residential repair gets the same documentation habit the commercial sites demanded: written pricing before any work starts, a photo record of what we found and what we fixed, and a 365-Day Done Right Promise that stands behind every job. We name the problem, we name the price, and we leave you the evidence. It’s how gate repair should work in New York City and Gate Repair in South Gate.
Key takeaways:
- Written price in your hand before any tool comes out. No surprise invoices at the end.
- Same-day repair availability across Manhattan, Brooklyn, Queens, the Bronx, and Staten Island.
- Every visit includes a documented photo record of what was found, adjusted, and replaced.
- We service nine major automation brands, not just one. Whatever motor sits on your property, we work on it.
- 365-Day Done Right Promise: if the repair isn’t right, we make it right. No fee, no argument.
What Our Gate Repair Service Includes
Gate repair in New York City covers a wide range of mechanical and electrical failures. We diagnose the specific fault, quote a flat written price, and fix the problem the same visit whenever parts are available on the truck. Here’s what each sub-service covers.
Electric Gate Repair
Electric gates depend on a control board, power supply, and sensor loop working together. When one fails, the gate either won’t move or moves in ways it shouldn’t. We test the incoming voltage, check the board for burned traces or blown relays, and replace only what’s actually failed. The diagnosis is documented with photos and voltage readings before we quote a repair.
Automatic Gate Repair
Automatic gate repair focuses on the operator, the motor that moves the gate, and its limit settings. If your gate stops six inches short of closed or bounces back open, the travel limits or force settings are usually the culprit. We reset limits, verify the obstruction sensitivity, and photograph the new settings so you and any future technician can see exactly what was changed.
Hinge & Post Repair
Worn hinges make a gate sag, and a sagging gate drags on the driveway and eventually breaks the operator. NYC winters accelerate this, salt and freeze-thaw cycles working on every weld and pivot, similar to conditions we see with Gate Repair - Bell. We replace bearings, weld cracked hinge plates, and set posts back to plumb. If a post has shifted, we repair it rather than band-aid the gate.
Gate Realignment
A gate that scrapes the ground, latches poorly, or leaves a wide gap at the strike is out of alignment. Sometimes it’s the hinges, sometimes the post has settled, sometimes the operator’s travel path was never set correctly. Gate realignment is often a same-day fix, tune the hinges, adjust the operator limits, and test the full travel cycle, and the cost is usually under $300 in New York City.
Lock Repair
Gate locks fail in two ways: the mechanical lock wears out, or the electrical release stops talking to the keypad or intercom. We replace lock bodies, strike plates, and the low-voltage wiring that feeds them. For gates with maglocks, we check the holding force with a pull test and replace any unit that doesn’t meet spec.
Weld & Rust Repair
Rust is the quiet killer of steel gates in New York City. Coastal air in Brooklyn and Queens, road salt everywhere else, it all eats through powder coating and into the frame. We grind out rust pockets, weld in new steel where sections have rotted through, and prime and paint the repair to match. The fix stops the structural damage before a gate section fails at the hinge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We service Viking operators regularly, and most of the calls are swing-arm motors that have lost their limit memory or developed a bad capacitor. Viking builds a solid operator, but the older units in New York City apartments take weather exposure on the head unit. We stock Viking OEM parts on the truck and can usually have a VIKING swinging again same day.
Ghost Controls and DoorKing cover a lot of residential driveways in the outer boroughs. Ghost Controls tends to show up as a DIY-installed operator that needs reprogramming or a new gear assembly. DoorKing is heavier, commercial-grade gear, and we see them as often on small parking lots in Queens as on private driveways in the Bronx. If you have a Viking, Ghost Controls, or DoorKing gate acting up, we’ll diagnose it honestly. If the motor can be repaired, we repair it. If it can’t, we’ll tell you and show you the written quote for a replacement before you agree to anything.
Whatever make you have, we can help. Those are three of the nine brands we service, and none of them requires a special technician. One company, whatever motor is on the property. That’s the point.
BeforeAfterSigns You Need Gate Repair Right Now
- Gate opens fine but won’t close all the way, or closes and immediately reverses. This is usually the photo-eye (the infrared beam that stops the gate if something crosses the path) misaligned, or the force setting set too low. Left unfixed, the gate stays open, and an open gate is an invitation. We align the beam, reset the force, and test the safety reversal three times before we call it done.
- You hear the motor run but the gate doesn’t move. That sound means the operator is working but the drive train isn’t, a stripped gear, a broken chain, or a sheared key on the shaft. In New York City, this is one of the most common winter failures, cold metal gets brittle. We replace the gear or linkage and get the gate moving same day.
- The gate sags noticeably and scrapes the driveway. Scraping means the hinge bearings are worn out or the post has shifted. Every scrape wears more material off the gate bottom, making the eventual repair more expensive. Fixing the hinge now costs a fraction of what a full gate replacement costs later.
- The keypad, intercom, or remote works intermittently. Intermittent operation usually points to a failing control board, a loose wire, or water intrusion in the keypad housing. You don’t want to be standing outside your own gate at midnight when the board finally dies for good. We test every connection and replace the failed part, not the whole system.
- Rust is visible at the hinge plates or bottom rail. Surface rust is cosmetic. Rust that flakes or craters is structural, and it’s eating the steel from the inside. If a hinge plate rusts through, the gate drops. We grind out the rust, weld in new steel if needed, and stop it before a hinge failure sends your gate into the driveway.
Our Gate Repair Process - Step by Step
- 1
You call, you talk to a person. No automated attendant, no callback queue, at any hour. You describe what the gate is doing, or not doing. We give you a realistic expectation of when we can be there, same day for most repair calls in New York City.
- 2
We show up and diagnose. The technician arrives in uniform, with a name and photo provided before arrival. We test voltage, check limit switches, inspect mechanical wear, and photograph everything we find. The diagnosis is documented, not verbal.
- 3
You get a written price before any work starts. This is Haven Standard Clause 1. The flat price, in writing, handed to you before a single tool comes off the truck. If you decide not to proceed, that’s your call. No pressure, no obligation.
- 4
We repair, adjust, and test. Parts are replaced with OEM components where it matters. Every adjustment is set to manufacturer spec. The gate is cycled through full open and close, and safety features are tested, photo-eyes, obstruction reversal, and edge sensors where installed.
- 5
You get a documented record when we leave. Photos of what was found, what was set, and what was installed. Part numbers, limit positions, and wiring notes. Left with you and filed in your job record. Under Clause 4 (Evidence on every job), this record is included on every visit at no additional charge. If anyone ever works on that gate again, they won’t have to guess.
How Much Does Gate Repair Cost in New York City?
Most gate repairs in New York City run between $180 and $650. A photo-eye realignment or limit-switch reset is typically $180 to $240. A replacement control board runs $350 to $550 depending on the brand. Hinge replacement on a heavy steel gate runs $250 to $400 per hinge, including the weld work. A full swing-gate motor replacement typically runs $800 to $1,400 depending on the brand and whether the arm bracket is intact.
| Repair Type | Typical Cost Range in NYC |
|---|---|
| Photo-eye alignment / limit reset | $180 - $240 |
| Control board replacement | $350 - $550 |
| Hinge replacement (per hinge, welded) | $250 - $400 |
| Swing-gate motor replacement | $800 - $1,400 |
| Full diagnostic visit (credited to repair) | $95 - $150 |
What affects the price: the brand of operator, the weight of the gate, whether parts are in stock on the truck or need to be ordered, and how much rust or previous damage we have to work around. A gate that hasn’t been serviced in ten years usually costs more to repair than one that was maintained. The way to avoid overpaying: get the price in writing before work starts, which is exactly how we operate. Our estimate is free, and it includes the diagnostic, the written quote, and the photo record of what we found. If you have a written estimate from another company, bring it. We’ll give you a free second opinion on it.
Gate Repair Near New York City - Our Service Area
We repair gates throughout Manhattan, Brooklyn, Queens, the Bronx, and Staten Island, and we regularly run service calls in Jersey City and the inner New Jersey suburbs. Typical response time for a repair call in New York City is same day or next morning. We’re the home team for gate work here, and we’ve also run Gate Repair in Los Angeles and Gate Repair in Chicago with the same written-price standard. If you’re in Gate Repair in New York City proper, call us and we’ll get a name and a time on the schedule.
Serving New York City, NY - Our Local Coverage Area
We’re based in the New York City area and know this community well, and we also offer our Gate Repair in Los Angeles. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in New York City
Gate repair is the diagnosis and correction of any mechanical, electrical, or structural problem with a residential or commercial gate. It includes operators, hinges, locks, control boards, safety sensors, and the physical frame of the gate itself. At Vance Gate Repair, gate repair is a documented process: find the fault, photograph it, write the price, fix it, and hand you the record.
Most repairs are completed the same day we arrive. A limit-switch reset or photo-eye alignment takes under an hour. A control board replacement takes 90 minutes to two hours. A welded hinge repair takes two to three hours including cool-down and paint. If a part has to be ordered, we give you a written timeline and a written price before we order anything.
Most gate repairs in New York City run between $180 and $650, with motor replacements running higher. You’ll get an exact written price before any work begins, not after. The price you approve is the price you pay, with no add-on fees at the end. Call (928) 260-0864 for a free diagnostic and written quote.
Yes, we service Ghost Controls and DoorKing operators, along with seven other major brands including Viking, FAAC, BFT, and LiftMaster. We stock OEM parts for the common failures on each brand and repair rather than replace whenever it makes sense. If the motor can be fixed, we fix it. If it can’t, we show you the written quote for replacement before you commit to a dollar.
Yes. A live person answers our phone 24 hours a day, 7 days a week, and we dispatch emergency repair calls throughout New York City with same-day availability for most calls. A gate stuck open is a security issue. A gate stuck closed is an access issue. Call (928) 260-0864 and we’ll get someone moving.
Every repair is covered by our 365-Day Done Right Promise. If the repair is not right, we make it right, no argument, no fee, no expiration within that one-year window. Parts carry their manufacturer warranty, and our workmanship is covered by the promise. The written record we leave with you documents exactly what was done, which makes any warranty claim straightforward.
Clear the driveway so we can get a vehicle close to the gate, and make a note of what the gate has been doing that’s unusual, when it started, and whether it’s worse at certain times of day. If you have remotes, keypads, or intercom handsets, have them accessible so we can test the full system. You don’t need to remove the gate or prep the work. We handle all of that.
Schedule Your Gate Repair Service in New York City Today
A gate that doesn’t work isn’t protecting anything. Call (928) 260-0864 and talk to a person who can name the problem and the price. Your estimate is free, it’s in writing, and it comes with a photo record of exactly what we found. Same-day service is available across New York City, and the 365-Day Done Right Promise stands behind every repair we make.
Written by Adrian Vance, Owner at Vance Gate Repair, serving New York City since 2014.