Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennesaw
A new gate installation in Kennesaw typically runs $3,200-$9,800 depending on whether you’re replacing a driveway swing gate, building a double gate for an HOA entrance, or adding automation to an existing manual gate. Most residential installs in Kennesaw take one to two days once materials are on site, and we schedule a free measure and written price before anything gets ordered. That written price is yours to keep, and it doesn’t change after you approve it. We work in Kennesaw every week, from the Barrett Parkway corridor down to the subdivisions off Stilesboro Road, and we know what the red clay does to a gate post over twenty years. If you’re dealing with a failed gate or planning a new one, call (928) 260-0864 and a live person will pick up.
Why Vance Gate Repair Is Kennesaw’s Preferred Gate Installation Company
We’re not the company that shows up, gives a verbal number, and hopes you’ll say yes. Adrian Vance built this business on a habit from commercial access-control work: write down the scope, write down the price, and photograph everything before you leave. In Kennesaw that matters more than most places, because so many gates here belong to HOAs that need documentation for board meetings and architectural committee reviews. Our crews arrive with a name and photo sent ahead, and every completed job leaves behind a written record of what was installed, what the settings were, and what the finished work looks like. The 365-Day Done Right Promise covers every installation: if something isn’t right within a year, we make it right at no charge. No argument, no expiration date inside that window. Under Haven Standard Clause 1, you get the written price handed over before any tool comes off the truck.
Response time to Kennesaw is same day for emergency calls and typically within 48 hours for scheduled installations. A live person answers the phone 24 hours a day, seven days a week. You won’t get a voicemail loop, and you won’t get a callback queue.
Our Gate Installation Services in Kennesaw
Double Gate Installation
Double gates are the workhorse of Kennesaw’s HOA entrances and wider driveway openings. We install double swing gates in aluminum, steel, and wrought-iron profiles, sized correctly for the opening and matched to the pillar spacing on site. Most double gate installs in Kennesaw run $5,500-$12,000 including operators, hinges, and post reinforcement where the existing masonry has shifted. We coordinate with the management company or architectural committee on style, height, and finish before anything gets ordered.
Swing Gate Installation
Single swing gates on masonry pillars are the most common residential gate in Kennesaw’s 1990s and 2000s subdivisions. A typical single swing gate with a new operator runs $3,200-$6,800. The single most important step on a Kennesaw swing gate is the post footing: Georgia red clay expands and contracts with seasonal moisture, and an undersized footing means the gate will go out of plumb within a few years. We set posts deeper than code minimums and photograph the depth before we pour.
Sliding Gate Installation
Sliding gates make sense on Kennesaw lots where the driveway slopes uphill from the road, or where a swing arc would cross into the neighbor’s front yard. We install cantilever and track-style sliding gates, and we handle the concrete pad, the operator, and the safety edge. Sliding gate installs in Kennesaw typically run $4,800-$10,500 depending on gate weight, length, and whether the driveway needs a new concrete run for the gate to travel on. Town Center-area homes on sloped red clay lots are the typical customer for this one.
Pedestrian Gate Installation
Pedestrian gates are the side-entry option for HOA communities with a separate walk path, or for homeowners who want a keypad entry without opening the full driveway gate. A pedestrian gate with a keypad or card reader in Kennesaw runs $1,800-$4,200 installed. We match the pedestrian gate to the existing driveway gate so the finish and picket profile line up, which matters when an architectural committee is reviewing the final photos.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Kennesaw
We install and service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Nine brands, one company that can work on whatever is already on your property. For Kennesaw HOAs running discontinued equipment like the LiftMaster SL595 loop detector systems common in 1990s subdivision entrances, we carry conversion kits on the truck rather than telling you to wait on a backordered part. If you have a Viking or DoorKing operator on an existing gate, we can integrate the new gate into what you already have instead of pushing a full replacement. Your gate installer should be able to work on the motor that’s already bolted to the pillar. Ours can.
Common Gate Installation Problems We See in Kennesaw Homes
- Masonry pillar settlement throwing swing gates out of plumb. Kennesaw’s red clay soil expands when wet and contracts when dry, which slowly moves brick and stone pillars. A gate that was dead level in 2005 can bind against the latch post by 2025, and the operator burns out trying to fight it. We reset the post or install a steel post core, then re-hang the gate and photograph the new clearance.
- Discontinued loop detectors on HOA entrance gates. The LiftMaster SL595 loop detector was a standard spec on Kennesaw subdivision entrances built before 2005. The unit and its parts are now discontinued. When an HOA gate fails for that reason, we convert the system to a current LiftMaster operator with a new loop detector rather than patching a 20-year-old board.
- Ice storms freezing hydraulic operators. Kennesaw catches ice storms more reliably than snow, and a frozen hydraulic operator on a shared entrance gate is a real problem when a resident tries to force the entry and snaps an aluminum gate arm. We install operators with cold-weather ratings and route wiring so it drains instead of pooling water that freezes overnight.
- Architectural committee approval delays. In Kennesaw’s HOA-heavy subdivisions, the gate has to clear the architectural review before the first shovel goes in the ground. We prepare a written scope with dimensions, finish specification, and a photo mockup reference so the committee has something concrete to approve. That same document becomes the basis of your written price under Haven Standard Clause 1.
Pricing for Gate Installation in Kennesaw, GA
Here are the numbers for the Kennesaw market, in writing:
- Single swing gate with operator: $3,200-$6,800
- Double swing gate with operators: $5,500-$12,000
- Sliding gate with operator and concrete pad: $4,800-$10,500
- Pedestrian gate with keypad: $1,800-$4,200
- Operator-only replacement on an existing gate: $1,400-$3,800
What moves the price: gate width and weight, whether the pillar or post needs resetting, whether you’re adding automation where none existed, and whether the HOA requires a specific finish or profile. The price you get is the price you pay. We hand you the written number before work starts, and if you already have a written estimate from another company, we’ll review it for free. Call (928) 260-0864 for an exact quote on your specific gate.
We Also Serve Cities Near Kennesaw
Our crews install gates across the northwest metro, and we regularly work in Acworth, Marietta, Woodstock, and Smyrna. If you’re in Kennesaw proper, you’re on our regular route. This page is part of our Gate Installation service coverage, and you can read more about our local work on the Kennesaw page.
Serving Kennesaw, GA - Our Local Coverage Area
We’re based in the Kennesaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kennesaw
Yes, in almost every Kennesaw subdivision built after 1990, the HOA’s architectural committee must approve the gate style, height, finish, and often the material before installation can begin. We prepare a written scope with dimensions and finish specifications that you can submit to the committee, and that same document becomes your written price. On shared HOA entry gates, we coordinate directly with the management company on scheduling and access. Call (928) 260-0864 if you need help assembling the approval package.
Yes, and this is one of the most common calls we get from Kennesaw HOAs. If the loop detector is still functioning, we can integrate the new operator with the existing loop. If it’s a discontinued unit like the LiftMaster SL595, we convert the system to a current LiftMaster operator with a new loop detector on the same visit. We carry conversion kits on the truck specifically because so many Kennesaw subdivision entrances east of I-75 were built with that equipment in the 1990s.
The short answer is a deeper post footing and a steel post core. Kennesaw’s red clay expands and contracts with moisture, which shifts masonry pillars and eventually throws a swing gate out of plumb. The gate itself rarely bends; the post moves. We set posts below the frost line and below the active shrink-swell zone, use a steel core for pillars we pour ourselves, and if we’re working with existing masonry pillars, we drill and pin anchor brackets rather than relying on surface bolts. We photograph the footing depth before the concrete goes in.
Yes, and this is not a place to cut corners. Automatic gates must comply with UL 325 entrapment protection standards, which means photo eyes, edge sensors, or both, along with proper force settings. That’s a safety code, not a preference. We set and test every entrapment protection device on every automatic gate we install in Kennesaw, and we document the final settings in the photo record we leave with you. If a gate can crush or pinch, it needs protection. Period.
Yes, and wooded lots are actually a real consideration here. Solar gate openers need direct sun on the panel for a good portion of the day, and a lot with heavy tree cover off Stilesboro Road or up toward the Kennesaw Mountain side may need a larger panel, a panel mounted away from the gate on a sunnier spot, or a hybrid solar-and-battery system. We’ll assess the sun exposure during the free measure and tell you straight if solar will work reliably or if you should run a low-voltage line instead. The written price covers either option before you decide.
If you’re in Kennesaw and need a gate installed, repaired, or converted, we’re the company that puts the price in writing before the work starts and leaves a photo record when we’re done. No argument about what was quoted. No guesswork about what was done. Call (928) 260-0864 and a live person will answer, any hour, any day.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Kennesaw and the northwest metro since 2014.