Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Delray Beach, FL
Gate motor and opener failures in Delray Beach follow a pattern that’s different from most of Palm Beach County. The city’s aging 1970s and 1980s HOA communities still run relay-based control boards and original swing-arm operators that are now 40-plus years old, while salt air off the Intracoastal and Atlantic corrodes motor housings, hinges, and circuit boards faster than inland cities see. Most Delray Beach gate calls we handle are Gate Motor & Opener jobs, and most replacement work traces back to that combination of coastal corrosion and parts obsolescence. If your gate won’t open, hums without moving, or trips its breaker, call (928) 260-0864 and we’ll send a technician who writes the price down before any work starts.
Why Delray Beach Homes Are Different
Delray Beach has one of the highest concentrations of aging gated HOA and 55+ communities in Palm Beach County. Century Village and comparable 1970s-1980s campuses were built with underground or swing-arm gate operators whose manufacturers no longer exist, and their 110V relay logic panels have no compatible replacement parts on the market. A “repair call” in these communities often becomes a full operator-and-board swap, because no sourceable relay matches the original wiring. That conversion dynamic barely exists in the newer-build HOAs of neighboring Boynton Beach or Boca Raton.
The snowbird cycle adds another layer. Gates in Delray Beach sit near-dormant from May through November, then handle peak traffic from November through April. Every spring we see a surge of failures that surface during the first heavy-use weeks, after months of salt accumulation and inactivity. The Intracoastal Waterway and Atlantic bracket most residential neighborhoods here, so powder-coated aluminum gates in Intracoastal-adjacent communities routinely show hinge pitting and operator failure within five to seven years without seasonal maintenance. Palm Beach County hurricane code also requires manual-release mechanisms on all automated gate operators, and a large share of older HOA gates lack compliant disconnects. That’s a recurring code-correction job we handle regularly in Delray Beach.
Our Main Delray Beach Services
Most Delray Beach homeowners call us for one of two reasons: a gate that needs repair, or a gate that needs to be installed. Both are handled with the same written-price rule on every job, and each has its own dedicated page with pricing detail and local specifics.
Gate Repair in Delray Beach
Repair work in Delray Beach usually starts with a motor that won’t respond, a gate that scrapes the ground, or a hinge that’s rusted through from salt air. We diagnose the fault, write the price, and complete the repair the same visit in most cases. Full detail on hinge replacement, motor swaps, and what repair costs in Delray Beach’s older HOA communities is on the Gate Repair in Delray Beach page.
Gate Installation in Delray Beach
New gate installations in Delray Beach range from replacement swing gates in Century Village-era communities to modern slide-gate systems in western Delray and barrier-island estates. The work includes measuring, permitting where required, and full operator setup. For a written breakdown of what a full installation includes and what it costs, see Gate Installation in Delray Beach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Delray Beach
Gate motor and opener failures in Delray Beach split into two groups. In the 1970s-1980s HOA communities like Century Village, the original operators are decades past their design life and parts are no longer manufactured, so replacement is usually the only honest option. In newer barrier-island and western Delray builds, the problem is more often salt corrosion on the motor housing or control board, which can sometimes be repaired without a full swap. Either way, we service nine major automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. One company that works on whatever motor is already on the property, rather than steering you toward a replacement you may not need. That’s the Gate Motor & Opener service we run across Delray Beach.
Motor Installation
Signs you need it
Your existing motor hums without moving the gate, the operator is original to a 1980s-era HOA install, or the control board shows scorch marks from salt-corroded connections.
What it costs in Delray Beach
Motor installation in Delray Beach typically runs $450-$900, depending on whether the old motor bracket is reused and whether the gate is a swing or slide type.
How we do it
We remove the dead operator, inspect the arm bracket and gear for wear, install the new motor, set the limit switches, and photograph the final position and wiring before handing you the written job record.
Motor Repair
Signs you need it
The gate opens partway and reverses, the motor runs but the gate barely moves, or a breaker trips when the operator is activated.
What it costs in Delray Beach
Motor repair in Delray Beach runs $150-$400, depending on whether the fault is a capacitor, limit switch, gear, or corroded terminal block.
How we do it
We test the capacitor and limit switch, inspect the gear and drive assembly, replace the failed component, and log every adjustment with photos and readings in your job record.
Slide Motor
Signs you need it
Your slide gate jerks along the track, stalls at the same point each cycle, or the chain or belt has visible slack.
What it costs in Delray Beach
Slide motor work in Delray Beach typically runs $400-$850, depending on chain versus belt drive and whether the track needs resurfacing.
How we do it
We align the motor to the drive sprocket, set the chain or belt tension, verify the photo-eye alignment, and run the gate through full open and close cycles before photographing the final settings.
What Gate Motor & Opener Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Motor installation | $450-$900 |
| Motor repair | $150-$400 |
| Slide motor replacement | $400-$850 |
How fast can you get a motor repaired in Delray Beach?
Most motor repairs we handle in Delray Beach are completed the same visit. A live person answers our phone 24/7, so call (928) 260-0864 and we’ll dispatch a technician to your property with the common parts on the truck.
Do you replace motors from older HOA gates?
Yes. Many Century Village-era gates run original underground or swing-arm operators with no available replacement relays. We swap the whole operator and board when repair isn’t possible, and we write the replacement price before any work starts.
Gate Access Control in Delray Beach
Gate access control in Delray Beach often comes down to two eras of hardware. Older HOA campuses still run original keypads and intercoms wired to relay panels that predate modern access protocols, while post-2000 barrier-island and western Delray communities use keypad, FOB, and app-based entry systems tied to slide-gate operators. Salt air corrodes keypad contacts and card reader boards quickly here, so Delray Beach service calls often involve cleaning or replacing weather-exposed access hardware rather than the operator itself. We handle everything from single-family driveway keypads to full multi-tenant phone entry systems, always with a written price before work starts. That’s the Gate Access Control work we do across Delray Beach.
Keypad Entry
Signs you need it
The keypad works intermittently after rain, some buttons no longer respond, or residents report being locked out during the evening.
What it costs in Delray Beach
Keypad entry repair or replacement in Delray Beach runs $150-$350, depending on whether we can clean the existing unit or need to install a weather-sealed replacement.
How we do it
We open the keypad, clean or replace the contact membrane, reseal the housing against moisture, reprogram the entry codes, and photograph the finished installation with the cover seated properly.
Phone Entry
Signs you need it
Visitors report no dial tone at the call box, calls drop when a resident tries to buzz someone in, or the system loses programming after a power outage.
What it costs in Delray Beach
Phone entry system repair in Delray Beach runs $200-$450, depending on whether the fault is the handset, the relay board, or the phone line connection.
How we do it
We test the phone line at the call box, check the relay that triggers the gate, replace the failed component, and run a test call from the box while documenting the result.
What Gate Access Control Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Keypad repair or replacement | $150-$350 |
| Phone entry repair | $200-$450 |
| Card reader or FOB system service | $180-$400 |
Can you add a keypad to an existing Delray Beach gate?
Yes. We install weather-sealed keypads on existing swing and slide gates, program the codes, and wire them into the current operator. Pricing is written and agreed before any wiring work begins, so call (928) 260-0864 to schedule.
Does salt air really affect access control hardware?
It does here. Keypads and card readers mounted within a mile of the Intracoastal or the Atlantic corrode faster than inland installs, and we routinely replace contact membranes and board connectors on access hardware in Delray Beach that is only five to seven years old.
Gate Parts & Welding in Delray Beach
Gate parts and welding work in Delray Beach is shaped by the salt air off the Intracoastal and Atlantic. Wrought-iron and tubular-aluminum gates in the city’s 1970s-1990s condo and HOA communities show hinge pitting, weld-joint rust, and post corrosion far sooner than inland gates, and many original hinges were never designed for 40-plus years of coastal exposure. We replace hinges, posts, rails, and rollers, and we do custom welding on-site when a gate needs to be repaired rather than replaced. Every job ends with a photo log of what was removed and what was installed, so you have a record in writing. That’s the Gate Parts & Welding work we handle throughout Delray Beach.
Hinge Replacement
Signs you need it
The gate sags on one side, the latch no longer lines up, or the hinge pin shows visible rust and pitting from years of salt air.
What it costs in Delray Beach
Hinge replacement in Delray Beach runs $120-$300 per hinge, depending on gate weight and whether the post needs grinding or reinforcing.
How we do it
We remove the old hinge, grind the surface clean, weld or bolt the new hinge into place, align the gate with the latch, and photograph the finished work with the gate level.
Post Replacement
Signs you need it
The gate post leans, the gate drags on the ground, or the concrete footing is cracked and the post moves when the gate cycles.
What it costs in Delray Beach
Post replacement in Delray Beach runs $350-$700 per post, depending on post size, concrete depth, and whether the old footing needs removal.
How we do it
We cut or remove the failed post, dig and set a new footing, install the replacement post with proper depth for the gate weight, and document the new post with the gate rehung and level.
Custom Welding
Signs you need it
A weld joint has cracked, a decorative scroll has broken off, or the gate frame needs reinforcement after years of coastal exposure.
What it costs in Delray Beach
Custom welding in Delray Beach runs $150-$500 per job, depending on the length of the weld, access, and whether we need to remove the gate for the repair.
How we do it
We clean the weld area to bare metal, weld the joint or scroll, re-coat the repaired area to match, and photograph the final result before we leave.
What Gate Parts & Welding Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Hinge replacement | $120-$300 per hinge |
| Post replacement | $350-$700 per post |
| Custom welding | $150-$500 per job |
Can you replace just a hinge instead of the whole gate?
Yes, and that’s often the right fix in Delray Beach. A rusted hinge doesn’t mean the gate is done. We replace the hinge, realign the gate, and photograph the result. Call (928) 260-0864 for a written price.
Do you weld on-site or take the gate to a shop?
Most welding we do in Delray Beach is on-site. If a gate needs a bench repair, we remove it, document the process, and reinstall it the same day or next day depending on the scope.
Brands We Service in Delray Beach
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule operators, plus five other major automation brands, across Delray Beach. Common replacement parts are stocked on the truck, so most motor and access repair jobs finish in one visit. See the full list on our brands page.
Pricing for Gate Repair in Delray Beach, FL
| Service | Typical range in Delray Beach |
|---|---|
| Motor installation | $450-$900 |
| Motor repair | $150-$400 |
| Slide motor replacement | $400-$850 |
| Keypad repair or replacement | $150-$350 |
| Phone entry repair | $200-$450 |
| Card reader or FOB system service | $180-$400 |
| Hinge replacement | $120-$300 per hinge |
| Post replacement | $350-$700 per post |
| Custom welding | $150-$500 per job |
Prices in Delray Beach push toward the higher end of these ranges when the gate is an original 1970s-1980s HOA install with obsolete relays and no compatible replacement parts, or when salt corrosion has spread from the hinge into the post. Whatever the job, the price is written and handed to you before any work starts, under Clause 1 of the Haven Standard. No surprise invoice at the end.
Neighborhoods We Serve in Delray Beach
We work throughout Delray Beach, from the barrier island to the western HOA subdivisions. Response time for most neighborhoods is 45 to 90 minutes, with same-day dispatch for motor and access failures.
- Century Village
- Barrier Island estates
- Western Delray HOA communities
- Intracoastal-adjacent condominium complexes
- Kings Point
Service Area - Cities Near Delray Beach
Our Delray Beach crews also cover the surrounding coastal and inland communities. We serve Boynton Beach, FL, Boca Raton, FL, Deerfield Beach, FL, and Lake Worth, FL. Dispatch and scheduling are coordinated from our Miami-area South Florida office, with local technicians serving Delray Beach directly.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Delray Beach
Most Delray Beach neighborhoods are within 45 to 90 minutes of our dispatch. A live person answers our phone 24/7, so if your gate won’t open or close, call (928) 260-0864 and we’ll send a technician the same day in most cases.
Most gate repairs in Delray Beach don’t require a permit, including motor, hinge, and welding work. New installations and some full operator replacements can require HOA approval or a county permit, and we’ll tell you before any work is scheduled if that applies to your property.
Yes. Many Delray Beach gate jobs involve HOA access systems, and we coordinate directly with property managers. We document every adjustment and leave a written record with the HOA, so the next technician doesn’t have to rediscover the wiring layout. Call (928) 260-0864 and we’ll schedule an on-site evaluation.
Call (928) 260-0864 for a free written estimate on any gate repair in Delray Beach. A live person answers 24/7, and the price is in your hand before any tool touches your gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Delray Beach Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.