Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lake Worth, FL
Gate motor and opener repair in Lake Worth almost always starts with the same problem: salt-air corrosion that has eaten through terminals, boards, or gear housings. Properties here sit on the Lake Worth Lagoon, and the airborne moisture that makes the view worth having is the very thing killing gate electronics in three to five years instead of the decade you would get inland. If your opener is dead, stuck mid-travel, or groaning without moving, call us at (928) 260-0864 and we’ll get a technician to your gate with a written price before any tool comes out of the truck.
Why Lake Worth Homes Are Different
Most Lake Worth homes were built between the 1950s and late 1970s: modest concrete block construction, often with wood-frame bungalows in the historic downtown district from the 1920s and 1930s. None of these were built with automatic gated entries. That means almost every gate repair in this city is a retrofit onto posts and footings that were poured for something else entirely, and many of those posts are now cracked, spalled, or leaning after decades of South Florida rain and sun. East of Dixie Highway, within a half-mile of the lagoon, the corrosion problem intensifies sharply. Technicians here routinely find hinge pins pitted to half their original diameter and motor terminals crusted with green oxidation on gates fewer than four years old. A standard galvanized hinge that might last ten years inland fails in three to five here. We quote stainless and marine-grade hardware as the default on Lake Worth jobs because anything else is a planned callback, not a repair.
Our Main Lake Worth Services
Lake Worth homeowners call us most about two things: repairing the gate they already have, and replacing one that has finally failed beyond reasonable repair. Here is how each works in this city specifically.
Gate Repair in Lake Worth
A Lake Worth gate repair visit typically involves a hinge, a motor, a board, or a physical panel that has failed from salt corrosion, storm debris, or a footing that shifted in sandy soil. We diagnose the exact failure, quote the repair in writing before starting, and you get a photo record of what was found and what was changed. For the full scope of what we fix and how the process works, see our dedicated Gate Repair in Lake Worth page.
Gate Installation in Lake Worth
A new gate in Lake Worth needs more than a panel and two posts. The manual gate you remove may hide a failed footer, and the opener you add has to survive years of salt and storms. We measure for marine-grade hardware, quote the complete installation in writing, and photograph every step. If you are planning a new gate or replacing a badly rusted one, see our Gate Installation in Lake Worth page for pricing and process details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Lake Worth
Most gate motor failures in Lake Worth come down to one of two things: a board that took in salt moisture and shorted, or a gearbox that ran dry after its seals failed in the heat and humidity. This city’s motor repair work is not usually about brand preference; it is about what works in these conditions. Which is why our Gate Motor & Opener service covers nine brands, so you do not have to replace a good opener simply because one company only carries two. When we arrive, we check the board for corrosion, test the limit switches, and photograph the readings before and after every adjustment.
Motor Repair
Signs you need it
The gate slows down near full travel, hums without moving, or trips its breaker only when triggered.
What it costs in Lake Worth
Motor repair in Lake Worth typically runs $225 to $1,165, with most jobs landing between $265 and $450 for a direct board, capacitor, or limit-switch fix.
How we do it
We test the power supply, open the motor housing, check for corrosion at the terminals, replace the failed part, photograph the new wire routing, and run three full open-close cycles before we leave.
Slide Motor
Signs you need it
Your slide gate shudders along its rail, stops mid-travel more often, or no longer reaches the post it once touched.
What it costs in Lake Worth
Slide motor replacement in Lake Worth generally costs $780 to $1,825, depending on horsepower and whether the cam or travel limits need resetting.
How we do it
We pull the old motor, inspect the chain or belt, install the replacement on the existing rail, reset the travel limits, and photograph the new motor plate and settings.
What Gate Motor & Opener Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Motor repair | $225 - $1,165 |
| Board repair | $265 - $450 |
| Slide motor replacement | $780 - $1,825 |
Can you repair my existing opener instead of selling me a new one?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a board or capacitor is the failure, we say so and give you the part number in the written quote before any work starts.
How fast can you get a motor running again in Lake Worth?
Most motor repairs are completed same-day once we reach the property. We carry common boards, capacitors, and limit switches on the truck, and the written price you approve before we start is the price you pay at the end.
Gate Access Control in Lake Worth
Salt air does more damage to gate access control than people realize. Keypads facing the lagoon corrode internally within a year or two, card readers fail when their seals shrink in the sun, and phone-entry boxes rot from the inside out. Our Gate Access Control work in Lake Worth usually starts with a meter reading at the controller, not a sales pitch for the newest device. We find the dead component, quote the replacement in writing, and leave you a photo record of the board inside every new device.
Keypad Entry
Signs you need it
The keypad’s buttons stick, the housing shows white corrosion, or it accepts only some codes without opening the gate.
What it costs in Lake Worth
A new keypad in Lake Worth typically costs $175 to $435 installed, depending on whether it is wired or wireless.
How we do it
We pull the old keypad, check the wiring for corrosion, install the replacement, program the codes, and photograph the wiring and the new settings before we leave.
Video Intercom
Signs you need it
The camera shows a foggy or dark image, the audio cuts out, or the monitoring screen inside the house goes blank while the gate still works.
What it costs in Lake Worth
Video intercom replacement or repair in Lake Worth runs $350 to $1,200, depending on whether the screen, camera, or both failed.
How we do it
We test the camera and monitor separately, replace only the failed part, run a signal test at the gate and the screen, and photograph the finished wiring.
What Gate Access Control Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Keypad entry | $175 - $435 |
| Video intercom | $350 - $1,200 |
| Controller board | $250 - $700 |
Do you fix gate entry systems in the bungalows east of Dixie Highway?
Yes. We service Lake Worth’s historic district and the lagoon-side blocks regularly. That environment is exactly why we default to sealed boards and corrosion-rated enclosures on every access control job east of the waterway.
Will my intercom system keep working during a power outage?
Most systems fail during outages unless they have a battery backup. We can add a backup while we are there, and every repair includes a written quote for that option before any work starts.
Gate Parts & Welding in Lake Worth
Hinge and post failures are the single most common call we take in Lake Worth, and the lagoon air is the direct cause. A welded gate that leans, scrapes the ground, or swings loose on its pins means the hinge or the post has lost structural integrity, usually from rust inside the weld area. Our Gate Parts & Welding team handles the metal work, but we also check the footing itself, because a fresh hinge welded to a crumbling post solves nothing for next hurricane season.
Hinge Replacement
Signs you need it
The gate sags visibly, the latch no longer lines up, or the hinges creak and show orange rust bloom around the pin.
What it costs in Lake Worth
Hinge replacement in Lake Worth typically costs $150 to $520 per hinge, depending on size and whether new plate steel needs to be welded in.
How we do it
We cut the old hinge off the post, wire-brush the mounting surface, weld a stainless or galvanized replacement at the correct offset, and photograph the finished weld before the gate is rehung.
Post Replacement
Signs you need it
The post wobbles at the base, shows vertical cracking, or has concrete spalling where the gate brackets are bolted.
What it costs in Lake Worth
Post replacement in Lake Worth runs $450 to $1,800, depending on whether the new post needs a new footer poured and how much old concrete must be removed.
How we do it
We brace the gate, break out the old post and footer if needed, set a new post in fresh concrete, allow proper cure time, and photograph the footing and level reading.
What Gate Parts & Welding Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Hinge replacement | $150 - $520 per hinge |
| Post replacement | $450 - $1,800 |
| Rail repair | $300 - $900 |
My welded gate is rusting at the hinge. Can you weld it in place or does it need to come off?
We can usually weld in place with the gate propped. If the post behind the hinge is rusted through, we will tell you before adding weld to a dying foundation, and give you a written price for the post work.
How long do welded repairs last in Lake Worth’s salt air?
With a marine-grade or stainless replacement hinge, expect five to seven years before any new work is needed. A standard galvanized weld in the lagoon-side blocks typically lasts three to five years here.
Brands We Service in Lake Worth
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule openers, among nine total brands. Common boards and capacitors for the most frequent Lake Worth failures stay stocked on the truck, which is why most basic motor repairs turn around same-day rather than waiting on a shipped part. See our brands for the full list.
Pricing for Gate Repair in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Motor repair | $225 - $1,165 |
| Board repair | $265 - $450 |
| Slide motor replacement | $780 - $1,825 |
| Keypad entry | $175 - $435 |
| Video intercom | $350 - $1,200 |
| Controller board | $250 - $700 |
| Hinge replacement | $150 - $520 per hinge |
| Post replacement | $450 - $1,800 |
| Rail repair | $300 - $900 |
What pushes a Lake Worth price toward the top of a range is almost always rust: a hinge that needs extra plate steel welded in, a post footer that has to be dug out instead of reused, or a controller board that shorted after the enclosure lost its seal. The number we quote you in writing before any work starts is the number you pay at the end.
Neighborhoods We Serve in Lake Worth
We run calls daily across the city, and salt corrosion means we do not cherry-pick by distance. Our technicians are in Lake Worth from the historic downtown bungalows to the canal blocks east of the lagoon and the 1950s concrete block homes further west.
- Historic Downtown Lake Worth
- Lake Worth Beach
- Village of Lake Worth
- Lake Osborne
- Sunset Ridge
Standard response in Lake Worth is same-day for motor and opener failures, and typically within one business day for scheduled welding or post work.
Service Area - Cities Near Lake Worth
We also cover gate repair across the surrounding Palm Beach County communities, including Wellington, FL, Royal Palm Beach, FL, Boynton Beach, FL, and West Palm Beach, FL. Same-day service applies in each of these cities for motor and opener failures.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Worth
Most simple repairs and part replacements do not require a permit, but new gate installations or post replacements involving a new footer may. We will tell you during the estimate if yours triggers a permit, and the written quote will reflect any fees before work starts.
We prioritize emergency calls after named storms because damaged gates leave a property open. Same-day service is normal for motor and opener failures year-round, including the summer months when heat and rain are hardest on the equipment.
A live person answers our phone 24/7. No voicemail loop and no automated attendant. If your gate is stuck open at 3 a.m. in Lake Worth, you will speak to a human who can dispatch a technician, not a recording.
If your gate is down, leaking rust at the hinges, or dead at the opener, call (928) 260-0864 now. We will give you a straight answer and a written price before anyone touches the gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.