Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Delray Beach
A new gate installation in Delray Beach for a single driveway swing gate typically runs $4,800 to $9,200, and a sliding gate for wider entries lands between $7,500 and $14,000. That’s the number you’ll get in writing before we order a single part, because Vance Gate Repair prices the job up front under The Haven Standard: a written scope, a written price, and photographic evidence on every visit. If you’re east of Federal Highway or along the Intracoastal, salt exposure changes what hardware we specify, and that’s a conversation we’ll have with you honestly before anything gets installed.
Our crews work in Delray Beach every week, from the barrier island communities to the western HOA developments off Atlantic Avenue and Linton Boulevard. Call (928) 260-0864 and a live person answers, 24 hours a day. No voicemail loop, no callback queue.
Why Vance Gate Repair Is Delray Beach’s Preferred Gate Installation Company
Delray Beach is a different kind of gate market than most of Palm Beach County. The housing stock skews older, the HOA density is unusually high, and the salt air from the Atlantic and the Intracoastal Waterway works on metal faster than property managers expect. That changes what gets installed, how it’s anchored, and what documentation matters when the board asks why a nine-year-old gate already looks like it’s been there for twenty.
Adrian Vance built this company out of commercial access-control work starting in 2014, and the habit carried over: every visit leaves a photographed record of what was found, what was set, and what was installed. Homeowners in Delray Beach’s condo and HOA communities tell us the documentation alone is why they call us back. Under Clause 4 of The Haven Standard – Evidence on every job – you get that photo log at no additional charge, on every single visit without exception.
We service nine major gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so we’ll install or integrate with whatever motor is already on the property rather than steering you toward a replacement you didn’t need. And the Gate Installation work is covered by the 365-Day Done Right Promise: if it’s not right, Vance makes it right within a full year, no argument and no fee.
You’ll also get a named technician before arrival. Background-checked, uniformed, with a photo provided so you know who’s at your gate. That matters in Delray Beach, where gate work often happens at rental properties or second homes while the owner is up north.
Our Gate Installation Services in Delray Beach
Swing Gate Installation
Single and double swing gates are the dominant style across Delray Beach’s 1970s-to-1990s condominium and deed-restricted communities. Most of them are tubular aluminum or wrought iron, and most of the originals are now rusting at the hinge welds. A properly specified swing gate in Delray Beach should use 316 stainless steel hinge posts and hardware, not galvanized steel, because the salt-laden air off the Intracoastal will eat galvanized coating within a few years. We install powder-coated aluminum on new builds and recommend stainless internals on everything coastal.
Sliding Gate Installation
Sliding gates make sense on wider driveways, which Delray Beach has plenty of on the barrier island and in the newer western estate communities. A slide gate operator needs a solid concrete run and proper roller trucks if it’s a cantilever design, or a track if it’s a V-track. We pour the pad to Palm Beach County hurricane code specifications, which require a manual-release mechanism on every automated operator, and we photograph the pad before the gate goes on it.
Pedestrian Gate Installation
Pedestrian gates in Delray Beach’s HOA and 55+ communities do double duty: they’re security and they’re age-in-place infrastructure. A pedestrian gate next to a driveway gate should swing freely, close softly, and lock with a keypad or fob that matches the main entry system. We install pedestrian gates with self-closing hinges and magnetic locks rated for salt exposure, which standard big-box hardware is not.
Security Gate Installation
Security gates in Delray Beach run from decorative aluminum perimeter gates to serious steel entries with keypad, FOB, and app access. We install the gate, the operator, the safety photocells, and the access control in one scope, with the wiring diagram left in the job record so no future technician has to reverse-engineer our work. If you’re on the barrier island, we’ll recommend a heavier steel frame and stainless components; the ocean side of A1A is harder on gates than anywhere inland in Palm Beach County.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Delray Beach
We work on whatever motor is already on the property. Linear, Viking, BFT, and Ghost Controls are all common in Delray Beach’s older and newer communities, and we stock parts for all of them locally. That means we’re not going to tell you a Viking operator on a 1990s swing gate “can’t be fixed” just because we’d rather sell you a new one. When replacement is genuinely the right call, we’ll show you the dead board, explain why no compatible part exists, and give you a written price for the new operator before any work starts.
Common Gate Installation Problems We See in Delray Beach Homes
- Salt-corrosion on hinge posts and weld joints. The Intracoastal Waterway and the Atlantic bracket most of Delray Beach, and the salt-laden air pits powder-coated aluminum and eats galvanized steel far faster than inland. Hinge post failure and sagging gates within five to seven years are routine out here, not unusual.
- Obsolete relay-logic control boards in 1970s-80s HOA gates. Boards wired to 110V relay logic panels whose manufacturers no longer exist mean a “repair” is often impossible. No compatible replacement relays can be sourced, so the job converts to a full operator-and-board swap.
- Spring surge failures from the snowbird cycle. Gates sit near-dormant May through November, then handle peak traffic November through April. Original post footings weakened by years of salt exposure crack under the sudden load, and we get called out the first week of season for operators that worked fine in October.
- Missing hurricane-code manual releases. Every automated gate operator in Palm Beach County needs a manual-release mechanism. A large share of pre-2000 Delray Beach HOA gates lack compliant disconnects, and that’s a recurring code-correction job we handle for boards that didn’t realize they were out of compliance.
Pricing for Gate Installation in Delray Beach, FL
Here’s what gate installation actually costs in Delray Beach right now:
| Service | Typical Range |
|---|---|
| Single swing gate with operator | $4,800 – $9,200 |
| Double swing gate with operator | $8,500 – $16,000 |
| Sliding gate with operator | $7,500 – $14,000 |
| Pedestrian gate with keypad | $2,200 – $4,800 |
| Full operator-and-board swap (older HOA gates) | $2,800 – $5,500 |
| Manual-release retrofit (code compliance) | $600 – $1,400 |
What moves the price: gate material and weight, whether we’re anchoring into existing post footings or pouring new concrete, operator brand, and whether the power run needs upgrading. We write the price down before we start, hand it to you, and nothing gets added after. Call (928) 260-0864 for a free estimate on your specific gate.
We Also Serve Cities Near Delray Beach
Vance Gate Repair serves Delray Beach and the surrounding South Florida coastal communities, including Gate Installation in Delray Beach plus Boynton Beach, Boca Raton, Deerfield Beach, and Lake Worth. If you’re in one of those cities, the same written-price standard and documented photo record applies. Dispatch and scheduling for the Delray Beach area are coordinated from our Miami (South FL) office, with local crews throughout Palm Beach County.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Delray Beach
When the control board is a 110V relay-logic panel from a manufacturer that no longer exists, replacement is the only real option. In Century Village and comparable 1970s-80s HOA campuses in Delray Beach, these boards have no compatible replacement relays available anywhere. The “repair” is a scavenger hunt with no end. A full operator-and-board swap runs $2,800 to $5,500 in Delray Beach, and it’s the rare case where replacement is cheaper than continuing to chase a dead platform. We’ll document the dead board with photos and show the board exactly why the parts can’t be sourced. Call (928) 260-0864 for an exact quote, and bring any estimate from another company if you want a second opinion at no cost.
Salt air from the Intracoastal and the Atlantic accelerates corrosion on hinges, welds, motor housings, and circuit boards dramatically. A powder-coated aluminum gate in an Intracoastal-adjacent Delray Beach community will show hinge pitting and operator failure within five to seven years without seasonal maintenance; the same gate in Boca Raton or inland Palm Beach County might go twelve. We specify 316 stainless steel hinge posts and hardware on every coastal Delray Beach installation, and we recommend an annual inspection to catch pitting before it becomes structural. Under The Haven Standard, every visit includes a documented photo record so you can actually see the corrosion progression over time.
The Delray Beach snowbird cycle creates a surge-failure pattern that doesn’t exist in year-round-population cities. Gates sit near-dormant May through November, then handle peak daily traffic from November through April. Original post footings in older communities, already weakened by years of salt exposure, crack under the sudden load. Operators that worked fine in October suddenly burn out limit switches or shear gear teeth in January. It’s not bad luck. It’s deferred load plus coastal corrosion. If your HOA gates fail every spring, we can install a heavier-duty footings and stainless internals now so next season isn’t a repeat. Call (928) 260-0864 for an evaluation.
Yes. Palm Beach County’s hurricane code requires a manual-release mechanism on every automated gate operator. Many pre-2000 Delray Beach communities, especially along the Intracoastal and in the older HOA campuses, have operators that were installed before the code requirement existed and never retrofitted. A missing manual release means residents can’t open the gate if the power goes out during a storm, and it’s a liability if an emergency vehicle needs access. We retrofit compliant manual disconnects for $600 to $1,400 depending on operator type, and we document it with photos for the HOA’s insurance file.
The difference is the age of the housing stock and the salt exposure, not the installation fundamentals. Delray Beach has a much higher concentration of 1970s-80s HOA and 55+ communities with original gate hardware that’s now obsolete, while Boca Raton and Boynton Beach have newer-build HOA communities where the operators are modern and the footings aren’t thirty years old. In Delray Beach, we’re more often doing full operator-and-board swaps on legacy relay-logic panels, whereas the neighboring cities trend toward simpler board replacements and preventive maintenance. The equipment we install here also needs to be specced for the Intracoastal corridor’s salt air, not generic inland Florida conditions.
Need a written price for gate installation in Delray Beach? Call (928) 260-0864 and a live person will answer. Free estimates, named technician before arrival, and a photo record of everything we do.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Delray Beach since 2014.