Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pompano Beach, FL
Gate motor and opener work in Pompano Beach lands differently than it does a few miles inland. We replace and repair slide motors, swing arms, and control boards that have been eating salt air from the Atlantic and canal humidity from the interior grid for 25 to 40 years. If your gate stopped mid-travel or the opener hums but nothing moves, call (928) 260-0864 and we’ll give you a written price before we touch a tool.
Why Pompano Beach Homes Are Different
Pompano Beach is threaded with an extensive inland canal network feeding into the Intracoastal Waterway, and its residential fabric is dominated by HOA-governed gated communities built during the 1970s through 1990s boom. That means gate operators and hardware across entire neighborhoods are aging out simultaneously. The double exposure to Atlantic ocean air on the east side and persistent canal humidity throughout the interior accelerates metal fatigue and circuit-board corrosion far more aggressively here than in inland Broward cities like Margate or Coral Springs.
We routinely open a control-board enclosure in a canal-front community on the west grid and find the board corroded from the inside out. Canal humidity condenses inside even “weatherproof” boxes overnight, and the board looks like it was splashed with salt water. Operators who mostly work inland assume a sealed box means a protected board. Here, that assumption fails constantly. Canal-front single-family lots almost universally have ornamental iron or aluminum driveway gates exposed to constant moisture from the water directly behind the home.
Our Main Pompano Beach Services
Most Pompano Beach homeowners reach us for one of two reasons: an existing gate has failed and needs repair, or an aging gate has been condemned by an HOA inspection and needs full replacement. Both jobs start with a written price.
Gate Repair in Pompano Beach
Repair work here usually means a slide or swing gate that ran fine for two decades and then stopped. We find failed bearings, stripped drive gears, or a motor that overheated against a corroded track. You get a documented photo record of what we found and what we replaced. See Gate Repair in Pompano Beach for the full scope.
Gate Installation in Pompano Beach
When a 1980s operator finally fails and the HOA requires a compliant replacement, installation becomes a scheduled, measured job. We handle the full build-out, from post setting to wind-load-rated hardware selection. Gate Installation in Pompano Beach covers what a new gate and operator package costs in this market.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Pompano Beach
A gate motor in Pompano Beach has to survive two enemies: salt-laden air on the barrier island side and canal humidity pushing upward from the water grid. When a 1988 swing operator finally quits, the failure is usually corrosion at the limit-switch terminals or a motor capacitor that cooked after years of fighting a rusted hinge. We work on whatever motor is already on the property, across nine major automation brands, and we hand you a written price before any work starts. If you’re not sure whether your existing operator is worth saving, this is the page for you: Gate Motor & Opener.
Motor Repair
Signs you need it
The gate moves slower than it did last year, stops and reverses randomly, or the motor hums without engaging.
What it costs in Pompano Beach
Motor repair in Pompano Beach typically runs $185 to $420 depending on the failure mode and whether the motor is a slide or swing unit.
How we do it
We bench-test the motor, replace the worn capacitor or limit switch, clean corrosion off the terminals, reset travel limits, and photograph the new settings.
Slide Motor
Signs you need it
The slide gate jerks along the rail, makes a grinding noise, or stops showing a fault light on the control board.
What it costs in Pompano Beach
Slide motor replacement in Pompano Beach runs $360 to $680 depending on brand and whether the drive gear is salvageable.
How we do it
We pull the old slide motor, check the rack and pinion for wear, install the new unit, set the open and close limits, and test the photo-eye alignment.
Intercom Integration
Signs you need it
Your gate motor works fine but the intercom stopped talking to the opener, so residents can’t buzz the gate open from inside.
What it costs in Pompano Beach
Intercom-to-motor integration in Pompano Beach runs $150 to $340 depending on whether we’re reusing existing wiring or running a new low-voltage line.
How we do it
We trace the relay circuit between the intercom and the control board, confirm the open command is reaching the motor, and leave a wiring diagram for the next technician.
What Gate Motor & Opener Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Motor repair | $185 - $420 |
| Slide motor replacement | $360 - $680 |
| Intercom integration | $150 - $340 |
Can you fix a gate motor the same day I call?
Yes, for most motor repairs we can dispatch same day. Motor replacements sometimes depend on the brand and part availability, but we carry common slide and swing motors on the truck for Pompano Beach jobs. Call (928) 260-0864 and we’ll tell you straight.
Do you work on my existing Gate Motor brand or push me to replace it?
We service whatever is already on your property. If the motor is repairable, we repair it and give you a photo record of the repair. If replacement is the better call, we’ll show you why with documented evidence.
Gate Access Control in Pompano Beach
Access control in Pompano Beach gets hit by the same two exposures: salt air on the east side and canal humidity on the west. Keypads corrode at the terminals, phone-entry boards fail from moisture that condenses inside the enclosure, and card readers that worked fine inland short out within two years on a waterfront gate. We install, program, and repair access control for residential and light-commercial gates all over Pompano Beach, and every job is governed by The Haven Standard: a written scope, a written price, and photographic evidence on every visit. For a deeper look at the systems we handle, check Gate Access Control.
Keypad Entry
Signs you need it
The keypad lights up but doesn’t send a signal, or it works intermittently after rain, or the buttons have gone soft from years of sun exposure.
What it costs in Pompano Beach
Keypad replacement or repair in Pompano Beach runs $120 to $260 depending on whether we reuse the existing wiring or pull a new low-voltage line.
How we do it
We test the keypad output at the control board, confirm the relay is closing, replace the keypad if needed, and seal the new unit against salt and moisture.
Phone Entry
Signs you need it
Visitors press the call button and the system either doesn’t ring out or rings but won’t open the gate when you press 9 on your phone.
What it costs in Pompano Beach
Phone entry repair in Pompano Beach typically runs $160 to $320 depending on whether the board can be reconditioned or needs full replacement.
How we do it
We check the phone line or cellular module, test the relay that sends the open command, and replace the board only if the signal path is dead.
Video Intercom
Signs you need it
The screen shows a black box where the visitor should be, the audio is full of static, or the gate won’t open from the audio handset.
What it costs in Pompano Beach
Video intercom repair in Pompano Beach runs $200 to $400 depending on whether we fix the existing camera or swap in a new one.
How we do it
We isolate whether the failure is at the camera, the cabling, or the indoor monitor, then replace only the failed component and re-aim the camera.
What Gate Access Control Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Keypad entry repair | $120 - $260 |
| Phone entry repair | $160 - $320 |
| Video intercom repair | $200 - $400 |
Will a salt-air environment kill my new keypad?
Sooner than inland, yes. We seal the new keypad with dielectric grease on the terminals and a gasket at the enclosure opening, which buys you years in Pompano Beach conditions. Call (928) 260-0864 and we’ll quote it in writing.
Can you integrate my existing phone entry with a new motor?
Yes, we do this regularly. The old phone entry board often outlives the motor. We rewire the relay output to the new control board and leave a wiring diagram for your file.
Gate Parts & Welding in Pompano Beach
Parts and welding work in Pompano Beach is a corrosion story. Steel hinges on canal-front ornamental gates rust through at the weld point, slide-gate rollers seize from salt deposits, and chain-driven operators stretch chains faster here than in dry inland communities. We perform on-site welding and parts replacement that keeps the gate square, the hinges quiet, and the roller track aligned, and every job gets a documented photo record before we leave. If you want the full scope of what we fabricate and replace, see Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate sags at the top corner, drags on the ground, or the hinge pin has worn an oval hole in the post bracket.
What it costs in Pompano Beach
Hinge replacement in Pompano Beach runs $95 to $220 per hinge depending on whether it’s a barrel hinge, a weld-on hinge, or a heavy ornamental pivot.
How we do it
We cut the old hinge off, grind the post clean, weld or bolt the new hinge in place, and re-square the gate leaf so it latches without dragging.
Custom Welding
Signs you need it
The gate has a crack at a weld joint, a broken scroll or finial, or the frame has pulled apart at the corner from years of wind and humidity.
What it costs in Pompano Beach
Custom welding in Pompano Beach runs $130 to $300 per repair point depending on the severity of the crack and the amount of grinding and re-priming needed.
How we do it
We prep the area, weld with a rod matched to the gate’s material, grind the joint smooth, and prime and paint it so the repair doesn’t flash-rust.
Gate Rollers
Signs you need it
The slide gate scrapes along its rail, the rollers wobble, or the gate fails to close fully because a seized roller is fighting the motor.
What it costs in Pompano Beach
Gate roller replacement in Pompano Beach runs $80 to $180 per roller depending on size and whether the bearing is serviceable.
How we do it
We pull the old rollers, inspect the track for wear, install new sealed-bearing rollers, and re-level the gate so the motor isn’t overworking.
What Gate Parts & Welding Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Hinge replacement | $95 - $220 per hinge |
| Custom welding | $130 - $300 per point |
| Gate roller replacement | $80 - $180 per roller |
Do you weld on site or take the gate to a shop?
We weld on site. That means the gate stays on its hinges or rollers while we work, and you can watch what we’re doing. We leave a photo log of every weld and the primer we used.
Can you replace a hinge without replacing the whole gate?
Almost always, yes. We grind out the failed hinge, weld in a new one, and re-square the gate. Unless the frame itself is rotten, the gate stays.
Brands We Service in Pompano Beach
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with five other major automation brands. We stock common slide-gate rollers and hinge sets on the truck for Pompano Beach jobs, and parts we don’t carry are usually on hand within a day. For a full rundown, see our brands.
Pricing for Gate Repair in Pompano Beach, FL
| Service | Typical range in Pompano Beach |
|---|---|
| Motor repair | $185 - $420 |
| Slide motor replacement | $360 - $680 |
| Intercom integration | $150 - $340 |
| Keypad entry repair | $120 - $260 |
| Phone entry repair | $160 - $320 |
| Video intercom repair | $200 - $400 |
| Hinge replacement | $95 - $220 per hinge |
| Custom welding | $130 - $300 per point |
| Gate roller replacement | $80 - $180 per roller |
The two things that push a Pompano Beach gate job to the top of these ranges are salt corrosion on old hardware and HOA-driven compliance upgrades that require heavier wind-load-rated components. Whatever the job, the price is written and handed to you before any work starts, and nothing gets added at the end.
Neighborhoods We Serve in Pompano Beach
We cover the full Pompano Beach grid, from the canal-front communities west of Federal Highway to the barrier-island side along A1A and everything between. Typical response time across the city is same-day for motor and access control calls.
- Cypress Bend
- Palm Aire
- Harbor Village
- Cresthaven
- Garden Isles
Service Area - Cities Near Pompano Beach
In addition to Pompano Beach, our crews cover the surrounding Broward County market. We regularly dispatch to Coconut Creek, FL, Margate, FL, Deerfield Beach, FL, and Fort Lauderdale, FL. If you’re on the edge of any of these cities, call and we’ll confirm coverage.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pompano Beach
For repairs, usually not. For full gate installations or major structural changes, Broward County wind-load codes may require an engineered plan. We handle the paperwork when it’s needed and tell you up front if your HOA has to sign off first.
Most motor and access control calls in Pompano Beach are same-day. A live person answers our phone 24/7, so you’re never leaving a voicemail and waiting for a callback. Call (928) 260-0864 and we’ll get you a time window.
Yes. That’s Haven Standard Clause 1. The written scope and written price are handed to you before a single tool comes off the truck, and the invoice at the end matches what you signed. No surprise charges, no pressure.
If your gate is down, noisy, or just not holding settings, call (928) 260-0864 and we’ll get a technician to your Pompano Beach property with a written price. We work on whatever motor you have, and every visit leaves a documented record.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pompano Beach Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.