Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Haltom City, TX
Gate motor and opener repair in Haltom City averages $240-$560, depending on whether the motor is rebuilt or replaced and whether the arm bracket or limit switches failed. Most calls we handle are same-day or next-day. The housing here was largely built between 1950 and 1980, so we’re often working on original pipe-frame gates set in expansive Blackland Prairie clay that has been pushing posts out of plumb for decades. If your gate won’t open, won’t close, or groans when it tries, call us at (928) 260-0864 and we’ll give you a written price before any work starts.
Why Haltom City Homes Are Different
Two things shape gate work in Haltom City more than anything else: the soil and the industrial corridor. The clay under most of the city shrinks hard during summers that routinely pass 100°F, then swells when the fall rains return. Gates set in the 1950s and 1960s often had posts sunk two feet with a single bag of concrete, which is nowhere near enough for this soil. Each drought-heave cycle twists the post a few degrees and drags the latch out of alignment. We return to the same addresses year after year, resetting the same post or re-truing the same hinge.
Along Haltom Road and the Airport Freeway, the work changes completely. The salvage yards, fleet lots, and used-car operations run heavy commercial slide gates built for truck traffic, often with motor systems most residential gate companies never see. Sourcing parts means going to commercial-grade suppliers, not the hardware aisles. That gives us a read on both ends of the Haltom City market: the ranch house with a sagging chain-link gate on a clay-heaved post, and the auto recycler whose 400-pound slide gate stopped on its track at 6:00 a.m.
Our Main Haltom City Services
Two jobs dominate the phone calls we get from Haltom City: repairing what’s already there and replacing it when the frame or post has failed past the point of sensible repair.
Gate Repair in Haltom City
Repair work in Haltom City usually means diagnosing a motor that won’t respond, a gate that binds mid-travel, or a hinge that has torn free from a clay-heaved post. We open the operator, check the limit settings, inspect the track and rollers, and photograph everything. The written price covers the repair, not just the diagnosis. On our Gate Repair in Haltom City page you’ll find the full breakdown of repair jobs, price ranges, and signs you can check before calling.
Gate Installation in Haltom City
New installations in Haltom City have to account for the clay beneath the work. We won’t set a gate post two feet deep in this soil and call it done. The post diameter, concrete depth, and drainage all get specified on paper before excavation starts, because the person who lived in that house before you likely inherited bad post work we’re now redoing. See Gate Installation in Haltom City for the full scope of new gate work, from chain-link replacements to steel driveway gates with operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Haltom City
Gate motor and opener work in Haltom City spans two very different sides of the trade. In the ranch-house neighborhoods, we’re usually replacing or rebuilding a light residential swing-arm opener on a gate that’s binding due to post movement. Along Haltom Road and the Airport Freeway, we’re opening and repairing Viking, DoorKing, and Elite commercial slide motors on gates that see hundreds of cycles a day at salvage yards and fleet lots. Both sides come back to the same thing: the motor has to work against the gate it’s attached to, and in this soil that gate is rarely square. Our Gate Motor & Opener service covers all nine major brands we work on, with the written price handed over before any part is touched.
Motor Repair
Signs you need it
The opener hums but the gate doesn’t move, or the gate stops halfway and reverses without anything in the path.
What it costs in Haltom City
Most motor repairs here run $180-$340 when the problem is a failed capacitor, limit switch, or control board component rather than the motor itself.
How we do it
We open the operator housing, test the capacitor and board, check the limit-switch settings against the gate’s actual travel, then photograph the failed part and the replacement before closing it back up.
Motor Installation
Signs you need it
The existing motor has failed beyond repair, or you’re converting a manual gate to automatic operation for driveway access.
What it costs in Haltom City
A new swing-gate operator installation typically falls between $850 and $1,500 depending on brand, arm type, and whether the post needs reinforcement to anchor the bracket.
How we do it
We confirm the gate’s weight and width, select the properly rated operator, mount the bracket and arm, set the limits and force, then leave you with a photographed installation record and the operator’s written settings.
What Gate Motor & Opener Costs in Haltom City
| Item | Typical range in Haltom City |
|---|---|
| Motor repair (capacitor, limit switch, board) | $180 - $340 |
| Motor replacement (swing or slide) | $650 - $1,300 |
| Full operator installation | $850 - $1,500 |
How long does gate motor repair take in Haltom City?
Most motor repairs are completed in one visit, typically 90 minutes to two hours. Slide-motor work on commercial gates along the Airport Freeway corridor can run longer if track or roller issues are found.
Do you work on the motor that’s already on my gate?
Yes. We service Viking, Ghost Controls, DoorKing, Elite, and five other major brands so you aren’t pushed into replacing an opener that could be rebuilt. Call (928) 260-0864 and we’ll quote the repair in writing.
Gate Access Control in Haltom City
Access-control work in Haltom City follows the same split: keypads and phone-entry units on residential ranch gates, and card-reader or video-intercom systems at the light-industrial lots along Haltom Road. The commercial side runs heavy, so troubleshooting often means tracing a power run that’s been patched and spliced for years, or a keypad that’s been rebuilt more than once. On the residential side, the recurring failure is usually a keypad or antenna that’s been degraded by direct sun and the electrical storms that roll across Tarrant County in spring. Our Gate Access Control service covers keypads, remotes, phone entry, card readers, and video intercoms, with every job photographed and priced before work starts.
Keypad Entry
Signs you need it
The keypad doesn’t respond to entries, works intermittently after rain, or only some codes open the gate.
What it costs in Haltom City
Keypad replacement or repair runs $150-$350 depending on whether we’re replacing a wired unit or upgrading to a wireless model.
How we do it
We check the power at the keypad, test the wiring back to the operator, replace the unit if the contacts are corroded, then reprogram codes and photograph the installed work.
Video Intercom
Signs you need it
The monitor won’t ring, the video feed is blank, or callers can hear you but you can’t hear them.
What it costs in Haltom City
Video intercom installation or repair generally falls between $400 and $900 including programming and bracket work at the gate.
How we do it
We trace the signal path between the gate station and the indoor monitor, replace failed components, reset the network or analog wiring, and verify call and video quality before leaving.
What Gate Access Control Costs in Haltom City
| Item | Typical range in Haltom City |
|---|---|
| Keypad entry (repair or replacement) | $150 - $350 |
| Card reader system (commercial) | $500 - $1,000 |
| Video intercom (installation or repair) | $400 - $900 |
Can you add a keypad to my existing gate opener?
In most cases, yes. If the operator has an open input for an external keypad, we can tie one in the same day. Call (928) 260-0864 for a written price on your specific opener.
What access control do Haltom City commercial lots use?
Most of the industrial gates along Haltom Road and the Airport Freeway use a mix of card readers and phone-entry systems tied to a slide operator. We service all of it and can source commercial-grade replacement parts without waiting on a distributor.
Gate Parts & Welding in Haltom City
Gate parts and welding calls in Haltom City usually start with a hinge that tore off a rusted post or a latch that no longer catches because the gate shifted three inches in the clay. The other common job is track and roller repair on heavy slide gates at the industrial properties, where a worn roller set leaves the gate grinding against the rail instead of riding it. The difference between fixing the part and replacing the whole gate comes down to the condition of the post we’re welding to. Our Gate Parts & Welding service covers hinges, posts, rail, rollers, and custom fabrication, and every welding job leaves with a photo record of the prep, penetration, and finished bead.
Hinge Replacement
Signs you need it
The gate sags on one side, scrapes the ground near the latch, or the hinge pin has worn an oblong hole in the bracket.
What it costs in Haltom City
Hinge replacement on a standard residential gate runs $120-$260 per hinge, including cutting off the old bracket and welding on the new one.
How we do it
We support the gate, cut away the failed hinge, grind the post clean, weld the new bracket in place, then hang and level the gate before photographing the finished work.
Post Replacement
Signs you need it
The post is visibly leaning, the gate swings closed on its own, or the ground around the base stays soft and cracked after rain.
What it costs in Haltom City
Post replacement runs $300-$800 depending on depth, soil conditions, and whether we’re setting a new post in concrete or repairing an existing one with a sleeve.
How we do it
We excavate the old post, dig below the clay line, set the new post in deeper concrete with proper drainage, and re-hang the gate level once the concrete has cured.
What Gate Parts & Welding Costs in Haltom City
| Item | Typical range in Haltom City |
|---|---|
| Hinge replacement (per hinge) | $120 - $260 |
| Post replacement | $300 - $800 |
| Rail or roller repair (slide gate) | $250 - $550 |
Can you weld a gate back together on site?
Yes. We carry welding equipment on the truck for most repair calls. If the crack is structural, the job is quoted in writing before we light the torch. Call (928) 260-0864 to schedule a look at the gate.
Why do my gate posts keep moving every year?
The clay under Haltom City shrinks in summer drought and swells when rain returns. Shallow-set posts from the 1950s and 1960s move with the soil. A deeper set with proper concrete diameter usually ends the cycle.
Brands We Service in Haltom City
We maintain and repair operators from Viking, Ghost Controls, DoorKing, and Elite, plus five other major automation brands. Common replacement parts are stocked on our trucks, and hard-to-find commercial components can usually be sourced from our local suppliers within a business day. See our brands for the full line.
Pricing for Gate Repair in Haltom City, TX
| Service | Typical range in Haltom City |
|---|---|
| Motor repair (capacitor, limit switch, board) | $180 - $340 |
| Motor replacement (swing or slide) | $650 - $1,300 |
| Full operator installation | $850 - $1,500 |
| Keypad entry (repair or replacement) | $150 - $350 |
| Card reader system (commercial) | $500 - $1,000 |
| Video intercom (installation or repair) | $400 - $900 |
| Hinge replacement (per hinge) | $120 - $260 |
| Post replacement | $300 - $800 |
| Rail or roller repair (slide gate) | $250 - $550 |
Prices in Haltom City get pushed up by two things: commercial slide gates that require heavier-rated parts sourced from commercial suppliers, and residential posts that need re-setting in deeper concrete because of the clay movement. We factor those into the written price before any work starts. You agree to the number, and that’s the number you pay.
Neighborhoods We Serve in Haltom City
We work across Haltom City’s residential streets and the Haltom Road industrial corridor, with most calls answered the same day a repair request comes in and scheduled work usually booked within two business days. Response times for industrial slide-gate failures are treated as urgent because the gate often controls the entrance to an active lot.
- Haltom Road corridor
- Airport Freeway industrial strip
- North Haltom City residential district
- East Haltom City ranch neighborhoods
- Haltom City center
Service Area - Cities Near Haltom City
We also handle gate repair and access-control work in Fort Worth, TX, North Richland Hills, TX, Hurst, TX, and Bedford, TX. The same written-price rule and photo record apply wherever the gate is.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haltom City
Most repair work does not require a permit. New installations and major structural changes, like a new post set in concrete or an automated operator on a new gate, can trigger a permit requirement depending on the scope and location. We’ll flag that before work begins and handle the paperwork if it’s needed on our end.
For a gate that won’t open or won’t close, we typically respond the same day. Scheduled work is usually booked within two business days. A live person answers the phone at (928) 260-0864 at any hour, so you’ll know the response window before you hang up.
Every repair we complete in Haltom City is covered by our 365-Day Done Right Promise. If the same gate has the same problem within a year, we come back and make it right with no additional charge and no argument.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.