Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haltom City
Gate repair in Haltom City runs into two problems most Metroplex suburbs don’t see: expansive clay that twists posts out of plumb every fall, and a Haltom Road industrial corridor full of heavy commercial slide gates that residential gate companies won’t touch. We handle both. Our Gate Repair team works on pipe-frame ranch gates from the 1960s and 20-foot electric slide operators at auto salvage yards, and we carry the parts to fix both in one trip. A live person answers at (928) 260-0864 around the clock, and the price is written down before anyone picks up a tool.
Why Vance Gate Repair Is Haltom City’s Preferred Gate Repair Company
Adrian Vance started this company in 2014 doing commercial access-control work, and that background shows in how we document every Haltom City job. Before we leave, you get a photo log of what we found, what we adjusted, and what we installed, plus a written record with part numbers. No other gate company serving Haltom City hands you that stack of evidence on a residential visit. It means the next technician who works on your gate isn’t guessing, and you don’t pay twice to rediscover the same problem.
Our crews know Haltom City’s neighborhoods, from the ranch blocks off Denton Highway down to the light industrial parcels along Haltom Road. We’ve reset gate posts in the clay behind houses on Glenview, rebuilt hinges off Broadway, and pulled commercial operators at recyclers near the Airport Freeway. The Gate Repair in Haltom City work we do here is grounded in what the soil and the stock do to gate hardware, not a generic checklist.
Our Gate Repair Services in Haltom City
Electric Gate Repair
A Haltom City electric gate typically fails because the operator burned out, a capacitor went bad, or a safety input is false-tripping. We service Viking, Ghost Controls, DoorKing, and Elite operators, among others, and we diagnose the actual fault before recommending anything. If your gate won’t open and the motor hums, it’s usually the start capacitor; if it opens a foot and reverses, it’s usually a photo-eye out of alignment or a bad edge sensor.
Automatic Gate Repair
Automatic gate repair in Haltom City often means resetting a gate that the clay has moved. The operator itself is fine; the posts have shifted, so the leaf drags or the latch misses the receiver. We reset the post, shim the hinge, and then re-tune the limit switches so the opener isn’t working against a gate that’s out of plumb. On acreage properties where mains power isn’t practical, we also repair solar-powered openers, including battery replacement and panel rewiring.
Hinge & Post Repair
Haltom City’s post-WWII housing stock is full of shallow-set posts poured straight into Blackland Prairie clay. When the clay shrinks over a long hot summer, the post leans. When fall rain comes, it heaves the other way. We excavate the footing, set the post below the clay line in concrete, and replace worn hinge barrels with greaseable bearings where the gate sees heavy cycles. The fix is in the footing, not just the hardware bolted to it.
Gate Realignment
A gate that dragged yesterday and scrapes today didn’t necessarily get hit. In Haltom City, the usual culprit is soil movement. We re-level the leaf, adjust the hinge positions, and set the latch and the operator travel limits to the new geometry. Then we photograph the final settings so you have a record of where everything sits if the clay shifts again next year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Haltom City
We repair and maintain nine major gate-automation brands, including Viking, Ghost Controls, DoorKing, and Elite. If your Haltom City gate has a motor already bolted to it, we work on that motor; we don’t steer you toward a replacement you don’t need. For common faults like bad photo-eyes, limit switches, and receiver boards, we keep parts on the truck so a single visit usually finishes the job. For older or commercial-grade boards, we source from commercial suppliers, not the big-box shelf, which matters when you’re running a slide operator rated for truck traffic.
Common Gate Repair Problems We See in Haltom City Homes
- Post heave from shrink-swell clay. Haltom City sits on expansive Blackland Prairie clay. A post set 18 inches deep will move every wet-dry cycle. Gates that latched in June often miss their receiver by October.
- Burnt-out residential operators on wide farm-style gates. When a homeowner replaces a light tube gate with a heavier farm-style leaf and keeps the old opener, the motor works at twice its rating and burns out within a season or two. The operator has to be sized to the gate’s actual weight and length.
- Drained solar batteries on acreage gates. Cloudy winter weeks starve solar-charged batteries. We test panel output and battery health, and on longer runs we add a second panel or a shore-charge fallback where practical.
- Commercial slide gates on the Haltom Road corridor. Auto salvage yards and fleet lots run heavy electric slide gates that accumulate track debris, wear roller bearings, and snap shear pins. These need industrial components, not residential kits.
Pricing for Gate Repair in Haltom City, TX
Gate repair pricing in Haltom City runs on a flat, written quote, and the number you see is the number you pay. Hinge and post repair on a standard residential gate typically runs $185 to $420, depending on whether we’re re-setting one post or both, and whether the footing needs new concrete. Automatic gate repair, including a service call, diagnosis, and parts like a photo-eye or limit switch, usually falls between $220 and $480. A solar opener battery replacement on a rural Haltom City property runs $140 to $310, including the battery and bench testing. Commercial slide gate work, common along Haltom Road, is quoted per job after we can measure the operator, track, and leaf weight. Every quote is written and handed to you before work begins, under the Haven Standard Clause 1. Call (928) 260-0864 and we’ll schedule a visit.
We Also Serve Cities Near Haltom City
Alongside our Haltom City work, we handle gate repair in Fort Worth, North Richland Hills, Hurst, and Bedford. If your property sits along the boundary between Haltom City and one of these neighbors, the same crew and the same written pricing apply.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Haltom City
Because the clay under the posts moved. Haltom City sits on Blackland Prairie clay that shrinks all summer and swells when rain returns in the fall. The post leans a few degrees, the leaf sags, and the latch misses its receiver. It’s not a hinge problem; it’s a footing problem. We re-set the post below the clay line and re-align the gate. Call (928) 260-0864 for a written quote.
Yes. We regularly service commercial electric slide gates along the Haltom Road industrial corridor, including auto-parts recyclers and fleet yards. Those operators are rated for truck traffic and need commercial-grade track, rollers, and safety components, which we source from industrial suppliers. We’ll document the operator’s current limit readings and photo the track condition before quoting.
We do. On acreage gates where running mains power would cost more than the opener, a solar system with a properly sized panel and battery bank is often the right call. We size the panel to the operator’s draw and the gate’s cycle count, and we weatherproof the control enclosure for the heat and the severe storms we get in Tarrant County. Estimates are free and written.
Every automatic gate operator should have a functioning entrapment protection system: reversing edges or photo-eyes that stop the gate when something is in the path, and the operator should reverse on contact. If your gate closes on a trash can and keeps pushing, turn the operator off and treat it as a repair that day. These systems are safety devices, not conveniences. A trained technician should test and set them because high-tension gate hardware and moving leaves can cause serious injury if mis-adjusted. Call (928) 260-0864 and we’ll test and document your system.
Most of the time, yes, if the post gets set properly this time. Many Haltom City chain-link gates still sit on the original shallow footings poured when the house was built. Re-setting the post below the clay line with a deeper concrete collar fixes the recurring sag. If the post is rusted through, we’ll weld in a new one. You get a written quote before we start, and our 365-Day Done Right Promise covers the repair for a full year.
We set the gate right, we photograph the work, and we hand you a written record before we leave. That’s how every gate repair in Haltom City leaves our shop. Call (928) 260-0864 for a free estimate on your gate.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Haltom City’s residential and commercial gate repair needs.