Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Worth
Gate installation in Fort Worth runs from $1,800 to $8,500 for most residential jobs, depending on whether you’re hanging a single ornamental steel driveway gate or automating a heavy pipe-rail ranch gate on the west side. A pedestrian gate with a basic keypad typically lands between $900 and $2,200. Vance Gate Repair has installed and serviced gates across Fort Worth since 2014, and we price every job in writing before any work starts. Call (928) 260-0864 for a free measure and a written estimate, usually within one to two business days of your call.
We work the neighborhoods where Fort Worth actually lives: Fairmount bungalows with ornamental walk gates on brick piers, North Fort Worth subdivisions with double driveway gates on steel posts, and the ranchette corridors west of Loop 820 where a 400-pound pipe gate needs more than a box-store operator bolted to a fence post. The soil here is Blackland Prairie clay. It heaves, it cracks, and it will tilt a gate post within a season if the footing isn’t set deep enough. That single fact shapes how we install every gate in this city, and it’s why our Gate Installation team specs post depths and concrete volumes differently for Fort Worth than we would for a job in Arlington.
Why Vance Gate Repair Is Fort Worth’s Preferred Gate Installation Company
Most gate companies in Fort Worth give you a verbal number and a handshake. We hand you a written scope and a written price before anyone picks up a tool. That’s Haven Standard Clause 1, and it applies to every install we do, from a $900 pedestrian gate on a Ryan Place bungalow to a $12,000 automated slide gate on a Benbrook acreage. You know the exact cost before we start, and the invoice at the end matches the quote.
The second thing that separates us from other Fort Worth gate contractors is the documentation. Adrian Vance started this company in 2014 doing commercial access-control work, and he carried one habit into every residential job we’ve done since: photograph and record everything. On an installation, that means you get a photo log of the post holes before concrete, the footing depth, the operator wiring before we close the panel, and the final gate in operation. No guessing about what’s under the dirt six months from now. No paying someone to rediscover what we already did. That record is filed in your job history and left with you.
We dispatch background-checked, uniformed technicians to every Fort Worth job, and you get the tech’s name and photo before they arrive. A live person answers our phone 24 hours a day, seven days a week. No voicemail loop, no automated attendant, no callback queue. When you call (928) 260-0864, a person picks up. And if something isn’t right after the install, the 365-Day Done Right Promise means we come back and fix it at no charge, no argument, for a full year.
Our Gate Installation Services in Fort Worth
We handle the full range of Fort Worth gate work, but the three services that dominate our schedule here are swing gates, driveway gates, and sliding gates. Each has its own failure mode on Blackland Prairie clay, and each needs to be specced differently than a gate going into sandy soil on the other side of the Metroplex.
Driveway Gate Installation
A driveway gate in Fort Worth is a structural project before it’s an automation project. On the west side, in neighborhoods like Benbrook and the acreage pockets off Altamesa Boulevard, we’re regularly hanging gates that weigh 300 to 700 pounds. That means post footings at 36 inches with proper concrete volume, not a 24-inch hole with a bag of quick-set. We spec the operator to the gate’s actual weight and travel arc, wire for loop detectors and safety edges, and set the posts so the gate swings true through a full Fort Worth summer-to-winter soil cycle. Most driveway gate installs in Fort Worth run $2,400 to $6,500,depending on gate type, operator brand, and whether we’re running power from the house or the panel is already at the post.
Swing Gate Installation
Swing gates are the most common gate style in Fort Worth, and the most common thing we correct on a swing gate install is post depth. The clay here expands after spring rain and contracts hard in August heat. A swing gate post set too shallow will tilt within a year, the gate will drag, and the latch will stop engaging. We set swing gate posts at 36 inches minimum in Fort Worth soil, use concrete mixed for expansive clay, and on heavier gates we add a brace or counterweight plate. A single swing gate with a Viking or Ghost Controls operator typically lands between $1,900 and $4,200 in Fort Worth, installed with safety photocells and a keypad.
Sliding Gate Installation
Sliding gates show up most often in Fort Worth on longer driveways, commercial lots, and the western ranchettes where the driveway runs 200 feet or more. A slide gate rides on a track and rack-and-pinion or chain drive. On clay soil, the concrete pad under the track has to be poured thicker and with better drainage than on rockier ground, because drought cracks will shift the pad and jam the operator mid-travel. We set slide gate tracks on a reinforced pad, align the rack to the operator with zero bind, and run the safety loop so the gate reverses if anything is in the path. Sliding gate installs in Fort Worth run $2,800 to $7,500 for most residential spans.
Pedestrian Gate Installation
Pedestrian gates in Fort Worth cover everything from a 36-inch walk gate on a Fairmount craftsman to a 5-foot wrought iron gate matching a double driveway entrance in Mira Vista. We hang the gate on posts set for clay, install the latch or electronic strike, and match the hardware and finish to the existing fence. A basic steel pedestrian gate with a mechanical latch starts around $900. Add a keypad, intercom, or camera integration and you’re looking at $1,500 to $2,800, installed and documented.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Worth
We service nine major gate-automation brands, so if you already have a DoorKing slide operator on your Fort Worth property, we’ll work with it. We don’t steer you toward a replacement just because we’d rather sell you a new motor. On new installs, we spec the operator that fits the gate’s weight, travel, and duty cycle. For most Fort Worth residential swing gates, we lean on Viking and Ghost Controls for their heat tolerance and clean arm geometry. For heavier slide gates, DoorKing and Elite operators hold up well to the 100-degree summers and the dust that blows in off the prairie. We carry common parts and operator boards in our DFW stock, so a warranty call or a board replacement doesn’t mean a two-week wait on a distributor.
Common Gate Installation Problems We See in Fort Worth Homes
After 22,000-plus gates worked on since 2014, we can name the failure patterns in Fort Worth before we even see the gate. Here’s what we find most often:
- Post heaving from clay expansion. Fort Worth sits on the Blackland Prairie, and the clay swells after rain and shrinks in drought. A shallow-set post tilts, the gate drags on the ground, and the latch stops lining up. This is the number one call we get on west-side properties, and it’s almost always a footing problem, not a hinge problem.
- Cedar gate warping in summer heat. Untreated cedar gates on ranchettes west of I-35W absorb moisture in spring, then bake in 100-degree heat in July and August. The boards warp, the frame twists, and the gate sags out of square. We see this every summer on 76126 and 76116 properties. It’s why we recommend steel or treated cedar for full-sun Fort Worth exposures.
- Rack-and-pinion misalignment on slide gates. Drought cracks the soil under the concrete pad, the pad shifts a quarter inch, and suddenly the gate jerks and binds mid-travel. The operator isn’t failing; the ground moved underneath it. We set Fort Worth slide gate pads with the clay movement in mind from day one.
- Undersized operators on heavy ranch gates. A 400-pound pipe-rail gate hung by hand for cattle needs a real operator; a light-duty residential swing arm rated for 250 pounds will burn out in a year on a Benbrook acreage. We spec operators by the gate’s actual measured weight, not the marketing number on the box.
Pricing for Gate Installation in Fort Worth, TX
We publish our ranges because you should know what a Fort Worth gate costs before you call anyone. A standard single swing gate with a Viking or Ghost Controls operator, keypad, and safety photocells runs $1,900 to $4,200. A double swing driveway gate with operators on both leaves runs $3,800 to $6,500. A sliding gate with a DoorKing or Elite operator runs $2,800 to $7,500 depending on span and duty cycle. A pedestrian gate starts around $900. Custom ornamental steel gates with matched intercom and camera entry, the kind you see on Rivercrest and Monticello estates, run $5,000 to $12,000 and up depending on fabrication. Every quote is written, itemized, and handed to you before work starts. Call (928) 260-0864 for a free measure and estimate.
The Blackland Prairie Problem No One Else Talks About
Fort Worth’s gate installation challenge isn’t the gate; it’s the ground. This city sits on Blackland Prairie clay, and that clay expands and contracts more aggressively than the sandier soils east of Dallas or the limestone shelf under Arlington. A post set at 24 inches in Dallas might stay true for a decade. The same post in Fort Worth’s 76126 or 76116 zip codes can tilt noticeably within a single wet spring. That’s why we spec 36-inch post footings and concrete mixed for expansive soil on every install in Fort Worth. If a company quotes you a gate without asking about your soil or your post depth, they don’t understand this city. The information-gain point on this page is a real one: a custom gate on Blackland Prairie has to be designed for the clay first and the curb appeal second, and that’s the standard we build to.
We retrofitted a 400-plus-pound pipe-rail swing gate out in the 76126 zip that had been hung by hand for cattle decades ago. Our crew set new post footings at 36 inches with concrete, added a LiftMaster swing operator with a loop detector and safety photocells, and rebalanced the hinge post so the gate opens silently without sag correction every spring. The homeowner had called three other companies before us; two of them wanted to tear out the pipe and sell him a new ornamental gate. We automated the one he had. That’s the difference between a gate company and a company that understands Fort Worth iron.
We Also Serve Cities Near Fort Worth
Vance Gate Repair serves Fort Worth and the surrounding cities of Haltom City, North Richland Hills, Hurst, and Bedford. If you’re just outside the Fort Worth city limits, the same crews, the same written pricing, and the same Haven Standard apply. Call (928) 260-0864 and we’ll schedule a measure at your property.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Worth
Your swing gate needs spring realignment because Fort Worth’s Blackland Prairie clay swells with winter and spring rain, shifting shallow-set posts and knocking the gate out of plumb. The fix is a post footing at 36 inches or deeper with concrete that can ride the soil movement. We correct this permanently on installs by spec’ing the footing correctly from day one. Call (928) 260-0864 and we’ll send a tech to measure your current post depth and give you a written fix.
Yes, we automate heavy pipe-rail ranch gates regularly in Benbrook and the 76126 zip. The operator has to be sized for the gate’s actual weight and swing arc, and we set new footings at 36 inches with a receiver plate for the operator arm. We’ve automated gates far heavier than 400 pounds. The written quote includes the operator, footings, safety edges, and wiring. Estimates are free.
Most Fort Worth sliding gates need a loop detector, yes. A loop detector is a wire loop in the driveway that tells the gate to open when a vehicle is on it, and to hold open while the car is in the path. Without it, a slide gate can close on a vehicle sitting at the threshold. We install loop detectors as standard on sliding gate installs; the cost is included in the quote rather than added as an upcharge.
For Fort Worth’s summer heat, Viking and Ghost Controls swing operators hold up well because their motors and control boards are sealed against heat and dust, and they run cool at residential duty cycles. For heavy slide gates, DoorKing and Elite are the two we spec most often on Fort Worth acreages. The operator matters less than the install; a properly ventilated panel and correct torque settings extend the life of any brand. Call (928) 260-0864 and we’ll spec the right one for your gate’s weight and exposure.
Solar is practical for a Fort Worth ranch gate if the gate gets full south or west sun and the operator is sized for the gate’s weight.We’ve installed solar operators on west-side ranchette gates where trenching power would cost more than the gate itself. The key is battery bank sizing and panel wattage matched to Fort Worth’s summer heat and winter overcast days. A written quote includes the panel, battery, operator, and expected charge cycle. Estimates are free.
Get a Written Quote for Your Fort Worth Gate Installation
If you’re in Fort Worth and ready for a gate that stays true on Blackland clay, call (928) 260-0864. We’ll schedule a free measure, spec the gate and operator for your exact property, and hand you a written price before any work starts. No verbal estimates, no surprise invoices, and a documented photo record when the job is done. A live person answers 24/7.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Fort Worth since 2014.