Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills costs between $4,800 and $28,000 depending on the gate type, operator brand, and whether the property needs a fresh electrical rough-in. Most driveway gates run $6,500-$14,000 including the operator and safety edges. You’re not just buying a gate here; you’re buying one that passes Beverly Hills city inspection the first time. Our crews work the flats, the hills, and Trousdale regularly, and dispatch to Beverly Hills neighborhoods from our Los Angeles office. Call (928) 260-0864 if you want a written price before anyone touches your driveway.
Why Vance Gate Repair Is Beverly Hills’s Preferred Gate Installation Company
The difference between a gate company that serves Beverly Hills and one that actually understands it shows up at inspection. Beverly Hills runs its own Community Development Department, entirely separate from LADBS. Permits, plan checks, and inspections all happen through city channels most metro contractors never deal with. We do. When you hire us for Gate Installation, you get a crew that has pulled and passed BH permits on estate gates throughout the flats and the hills, not a company hoping the inspector won’t notice the conduit is undersized.
Adrian Vance built this company on commercial access-control documentation. Every Beverly Hills installation leaves you with a written scope, a photographed record of the conduit run before we backfill, and the part numbers of every component installed. That’s The Haven Standard, and it’s why Beverly Hills homeowners who already read the reviews call us after they’ve been burned by a verbal estimate that didn’t match the invoice.
Response time matters less on new installations than on repairs, but you should know a live person answers the phone at (928) 260-0864 at any hour. No voicemail tree. No callback queue. When you call about a gate installation in Beverly Hills, you talk to someone who can actually schedule the site visit.
We’re independently owned and operated. We service nine automation brands, which matters in Beverly Hills because so many estate gates run FAAC, BFT, or Nice/Came operators that standard residential gate companies don’t touch. We stock parts locally and we don’t steer you toward replacing a $900 motor when a $140 limit switch is the actual problem.
Our Gate Installation Services in Beverly Hills
Sliding Gate Installation in Beverly Hills
Sliding gates are the default solution for Trousdale Estates and other hillside properties where a swing gate physically can’t open against grade. A typical slide gate installation in Beverly Hills runs $7,500-$16,000, and the variable that drives cost more than anything else is the electrical. Many 1960s-era conduit runs are 18-gauge, which browns out modern 24V DC operators the moment the gate starts climbing. We run new 1″ rigid conduit where code requires it, and we document the entire rough-in with photos before inspection.
Swing Gate Installation in Beverly Hills
Single and dual swing gates dominate the flats south of Santa Monica Blvd, where Spanish Colonial and Tudor Revival estates call for heavy wrought iron or powder-coated steel. Swing gate installation in Beverly Hills runs $5,500-$12,000 depending on leaf width and whether we’re setting new posts. The marine layer that settles over the flats every morning is rough on hinge pins and bottom rollers, so we spec stainless hardware on every new swing installation. It costs a little more up front and saves you a sagging gate three years in.
Double Gate Installation in Beverly Hills
Double driveway gates are a Beverly Hills standard, not an upgrade. Most are eight to fourteen feet per leaf, and Santa Ana wind events put real lateral stress on the panels and the obstruction sensors. A dual-leaf swing gate with a synchronized operator pair runs $9,000-$20,000 here. We tune the sensor sensitivity for canyon wind patterns, which is a canyon-specific adjustment a flatland technician won’t make. If the arms aren’t tensioned for gust load, the gate false-positives and you’re locked out of your own driveway.
Pedestrian Gate Installation in Beverly Hills
Pedestrian gates in Beverly Hills usually match the driveway gate architecturally, so this is as much about fabrication as it is about hardware. A matching powder-coated steel pedestrian gate with a maglock or electric strike runs $2,800-$5,500. On Trousdale properties, pedestrian gates often sit at the top of steep stair runs, which means the post footings need to be deeper than minimum code. We pour them accordingly, and the photo record shows the rebar and the depth before concrete covers it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beverly Hills
Most Beverly Hills estate gates run European operators: FAAC, BFT, Nice/Came. We also install and service DoorKing, Elite, and Ghost Controls on properties where an American residential brand is a better fit. What matters is that we work on whatever is already on the property, and we stock parts locally for Beverly Hills customers. That means if your legacy BFT board fails during the installation of a new gate, we don’t have to stop the job while a part ships from Italy. We carry the board, the safety edges, and the photocells in our Los Angeles stock, and a technician brings them to your driveway the day we schedule the work.
Common Gate Installation Problems We See in Beverly Hills Homes
- Undersized 1960s conduit in Trousdale Estates. Original 18-gauge runs can’t carry the ampacity a modern 24V DC slide operator needs on a steep grade. The motor stalls mid-cycle, the board overheats, and the gate fails inspection. The fix is a new conduit rough-in, saw-cut through the driveway, before any motor swap.
- Hinge post rot at the base from marine-layer moisture. Wrought iron swing gates on the flats corrode at the hinge pins and bottom rollers. The panel often looks straight while the post fails below grade, which is why the gate suddenly sags by six inches. We replace the post, set it in a proper footing, and use stainless hardware.
- Santa Ana wind trips on dual-leaf swing gates. Obstruction sensors calibrated for still air false-positive during canyon gusts. The gate reverses mid-cycle, or refuses to close at all. We tune sensitivity and arm tension specifically for Beverly Hills wind patterns, which isn’t a setting you’ll find in a manufacturer’s manual.
- Obsolete control boards that can’t meet UL 325 entrapment protection. Legacy FAAC and BFT boards on 1980s and 1990s estate gates often can’t accept modern photocell and safety edge retrofits. Beverly Hills inspection will flag it. Honestly, on a 30-year-old board, replacement is usually cheaper than trying to patch it.
Pricing for Gate Installation in Beverly Hills, CA
Here are real Beverly Hills numbers, because you shouldn’t have to call to find out whether this is a $5,000 job or a $25,000 one.
- Pedestrian gate, powder-coated steel with maglock: $2,800-$5,500
- Single swing driveway gate with operator: $5,500-$9,500
- Dual-leaf swing driveway gate with synchronized operators: $9,000-$20,000
- Sliding driveway gate with 24V DC operator, existing conduit usable: $7,500-$12,000
- Sliding driveway gate with full electrical rough-in (Trousdale-era conduit replacement): $13,000-$18,000
- Custom estate gate, architect-drawn, heavy steel or wrought iron: $18,000-$28,000+
The price you’re quoted is the price you pay. Every Beverly Hills installation gets a written line-item quote before any work starts, under Clause 1 of The Haven Standard. If you have a written estimate from another company, bring it in and we’ll review it at no cost. Call (928) 260-0864 for an exact number on your gate. Estimates are free.
We Also Serve Cities Near Beverly Hills
Our crews cover Beverly Hills and the surrounding metro daily: West Hollywood, Studio City, Universal City, and Culver City. If your property sits just outside the city line, you’re still in our service area and the same permitting knowledge applies. Call (928) 260-0864 and we’ll confirm coverage on the phone.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Usually not, and the reason is ampacity, not age. The original 18-gauge conduit in Trousdale can’t supply enough current for a modern 24V DC slide operator on a steep grade. The motor browns out mid-cycle. Beverly Hills code and inspection will require new conduit sized for the operator’s draw, which means saw-cutting the driveway and running new 1″ rigid before the motor swap. We can quote the rough-in separately so you see exactly what the electrical costs, not a bundled number. Call (928) 260-0864 for a written breakdown.
The post is failing below grade, usually from corrosion at the base caused by daily marine-layer moisture. Wrought iron gates on the Beverly Hills flats rust at the hinge pins and bottom rollers. The panel holds its shape while the post rots or cracks underground, so the gate sags without ever looking bent. The fix is a new post set in a code-compliant footing, and we photograph the failed post before we pour so you have a record of what was actually wrong.
No. Beverly Hills inspection requires UL 325-compliant entrapment protection on any automated gate: photocells, safety edges, or both depending on the operator. Legacy boards that can’t accept modern safety retrofits will fail inspection, which means either a new board or a new operator. We spec UL 325 protection on every installation and include the component part numbers in your written quote. If you have an older gate, call (928) 260-0864 and we’ll tell you honestly whether it can be retrofitted or needs replacement.
Expect to pay 20-30% more in Beverly Hills than in Culver City or Studio City. The premium comes from city-specific permitting, inspection requirements, and the fact that most Beverly Hills gates are custom-fabricated rather than off-the-shelf. A dual-leaf wrought iron driveway gate that runs $7,000 in Culver City will often be $10,000-$14,000 in Beverly Hills simply because the gate itself is larger, heavier, and architecturally matched to the house. The electrical rarely differs; the steel does.
Yes. Every installation carries the full warranty: 365 days to make anything right, no argument, no charge, no expiration within that year. If a hinge pin loosens, a sensor drifts, or a weld cracks, we come back and fix it under Clause 3 of The Haven Standard. You get a photographed record of the original installation, so the technician who returns knows exactly what was installed and how it was set. Call (928) 260-0864 to schedule a site visit and get a written quote.
Contact Vance Gate Repair for Gate Installation in Beverly Hills
If you’re planning a gate installation in Beverly Hills, call (928) 260-0864 for a free, written estimate. We’ll walk the property, check the existing conduit and operator, and hand you a line-item price before any work starts. Adrian Vance built this company on the principle that a customer should never pay twice to rediscover the same problem. We document everything. We write it down. We leave the evidence with you.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Beverly Hills with documented gate installation and repair since 2014.
Gate Installation in Nearby Areas