Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Cleburne, TX
Gate motor and opener failures in Cleburne are usually not electrical, they are mechanical. The expansive clay soils that run through Johnson County heave steel posts out of plumb during the wet-dry cycle, and a gate that binds against its hinges will burn out even a healthy motor. We reset the post or weld the hinge, then test the opener. Call (928) 260-0864 and we will name the fix and the written price before any tool comes off the truck.
Why Cleburne Homes Are Different
Cleburne sits at the center of Johnson County’s ranchette and acreage culture. This is not ornamental-iron subdivision work like you would find in Burleson or Mansfield. Gate repair in Cleburne means automated driveway gates and ranch-style pipe gates on 1 to 20 acre rural residential properties, mostly swing and slide gates at the end of long gravel drives off roads like Nolan River Road and County Road 708.
The defining local condition is the clay. Heavy expansive soils shrink during Cleburne’s summer droughts and swell after spring rains, heaving gate posts out of plumb and binding frames in a cycle that repeats every single season. On the acreage roads south and west of town, technicians regularly find the gate operator gets blamed for a failure when the actual problem is a tilted post the clay has pushed 2 to 3 inches out of vertical. The real repair is re-setting the post, not swapping the opener. Post-footing depth and concrete collar technique matter more here than almost anywhere else in North Texas.
Cleburne also sits in a winter ice corridor that catches freezing precipitation more reliably than areas immediately north of Fort Worth. Ice loading snaps hinge pins, cracks wooden slats, and seizes operator gears. The housing stock spans early-1900s Craftsman and Victorian homes near the historic downtown square to mid-century ranch houses and a wide belt of newer acreage properties, so a tech in Cleburne may see a welded pipe gate in the morning and a Victorian-era iron gate in the afternoon.
Our Main Cleburne Services
Two services generate most calls from Cleburne homeowners: repairing an existing gate that has stopped working properly, and installing a new gate where none exists or the old one is beyond saving. Here is what each involves locally.
Gate Repair in Cleburne
Repair work in Cleburne usually means diagnosing why a gate binds, sags, or will not travel. The clay soil is the usual suspect. Gate Repair in Cleburne involves checking post plumb, hinge wear, rack alignment, and operator health before touching anything. We write the price before work starts, and a photo record of what we found and fixed goes home with you.
Gate Installation in Cleburne
A new gate on Cleburne clay needs deeper footings and a concrete collar sized for the soil, not just the gate. Gate Installation in Cleburne means a written scope that names the post depth, the operator brand, and the final price before any excavation, because wet-dry cycles will expose shallow work within a year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Cleburne
Gate motor and opener work in Cleburne starts with the mechanism, because clay soil movement creates binding that kills motors. When a post heaves a couple inches, the gate drags on its hinges, the motor draws higher current, and the limit switch or gear train fails. We check the gate travel first, then the Gate Motor & Opener. The written price covers the opener work and the mechanical correction, not just a part swap.
Motor Installation
Signs you need it
The operator hums but the gate does not move, or the motor has been repaired twice in the same year.
What it costs in Cleburne
Most motor installations run between $650 and $1,900, depending on brand, gate weight, and whether mounting brackets need reinforcement.
How we do it
We verify post plumb and gate travel, mount the new operator, set the limit switches, and photograph every setting before the gate is cycled.
Motor Repair
Signs you need it
The gate starts and stops erratically, or the motor runs but the gate opens slower with each cycle.
What it costs in Cleburne
Repairs typically run between $180 and $450, with the price quoted after we open the housing and name the failed part.
How we do it
We test limit switch travel, inspect the capacitor and gear train, replace the failed component, and leave a written record of the part number installed.
Linear Motor
Signs you need it
A slide gate uses a linear arm or rack drive, and the gate rattles or stalls where the arm meets the gate.
What it costs in Cleburne
Linear motor work in Cleburne runs between $320 and $850 when the arm or rack drive needs replacement rather than a full operator.
How we do it
We check to see whether the rack is still straight, and if clay movement bent the rack, we address that before replacing the linear mechanism.
Slide Motor
Signs you need it
The gate shudders when it starts, or a slide gate stops partway and the motor thermal-limits.
What it costs in Cleburne
Slide motor replacement runs between $750 and $1,900 depending on gate weight, with the written price covering the motor, mounts, and travel setup.
How we do it
We verify the rail is level and the wheels roll free before installing the motor, because a bound wheel is what killed the last one.
What Gate Motor & Opener Costs in Cleburne
| Item | Typical range in Cleburne |
|---|---|
| Motor installation | $650 - $1,900 |
| Motor repair | $180 - $450 |
| Linear or slide motor work | $320 - $1,900 |
Can you fix a gate motor the same day in Cleburne?
Most motor repairs are same-day because the failed part is either common stock or identifiable on site. If we do not carry the part, the written quote names the exact part number and the day it arrives. Call (928) 260-0864 to schedule the visit.
How much does a gate opener replacement cost on an acreage property in Cleburne?
Typical opener replacement on acreage gates runs between $750 and $1,900. The range is wider here because gates on larger properties are heavier, and the cost includes travel and any post or rack correction. The price is written before work begins.
Gate Access Control in Cleburne
Gate access control in Cleburne is usually a matter of giving a long driveway one entry point that works reliably in weather and keeps out people who have no reason to be on the property. Acreage owners often want a keypad or remote for family, plus a phone or intercom path for deliveries. Our Gate Access Control work starts with a written list of who needs in and how, then we install and program, and leave a photographed wiring diagram behind.
Keypad Entry
Signs you need it
You are tired of handing out remotes, or farm hands and delivery drivers need access without a fob.
What it costs in Cleburne
Keypad entry systems for Cleburne gates run between $280 and $700 installed, depending on whether a receiver is already on the operator.
How we do it
We wire the keypad to the operator, program the codes, and photograph the final wiring so a future visitor call does not mean re-tracing the whole system.
Remote Control
Signs you need it
You want to open the gate from the truck without rolling down the window in Cleburne heat or ice.
What it costs in Cleburne
Remote control additions run between $90 and $300 when the operator receiver is compatible, plus $60 to $120 per extra transmitter.
How we do it
We verify receiver compatibility, program the transmitter on site, and document the frequency and code protocol in the written record.
Phone Entry
Signs you need it
Deliveries, feed trucks, or guests arrive without a remote or code and you want to open the gate from your phone.
What it costs in Cleburne
Phone entry modules run between $450 and $950 installed, depending on cellular versus landline or VoIP wiring.
How we do it
We install the module, tie it to your phone line or cellular path, and test each entry path before we leave.
Video Intercom
Signs you need it
You want to see and speak with whoever is at the gate before you open it.
What it costs in Cleburne
Video intercom systems with a gate release relay run between $700 and $1,600 installed on Cleburne properties.
How we do it
We mount the panel at the gate, run the release circuit to the operator, and pair the interior monitor, then document the wiring.
What Gate Access Control Costs in Cleburne
| Item | Typical range in Cleburne |
|---|---|
| Keypad entry | $280 - $700 |
| Remote control | $90 - $300 plus $60 - $120 per extra remote |
| Phone entry | $450 - $950 |
Can you add a phone entry system to my existing gate operator?
Yes, most operators from Ghost Controls, DoorKing, Elite, and Mighty Mule accept a phone entry module on the open or close relay. We confirm compatibility before quoting. Call (928) 260-0864 to check your model.
Will a keypad work with my existing remotes?
Usually, because keypads connect to the operator’s receiver rather than replacing it. We verify frequency compatibility on the first visit and the written quote names the exact hardware required.
Gate Parts & Welding in Cleburne
Gate parts and welding in Cleburne usually means steel work on pipe gates, not decorative iron. A gate that leans because a hinge tore out of a post, or a slide gate whose rail was bent by a tractor nudge, needs a welder, not a wrench. Gate Parts & Welding is where we set the metal right, then coat the weld, then verify the gate travels true before the operator is ever tested.
Hinge Replacement
Signs you need it
The gate sags on the latch side, or hinge pins show wear that lets the gate drop an inch or more when it opens.
What it costs in Cleburne
Hinge replacement on a Cleburne pipe gate runs between $150 and $400 per hinge, depending on post access and weld thickness.
How we do it
We cut the old hinge off, grind the post clean, weld the new hinge at the original height, and photograph the finished weld before paint.
Post Replacement
Signs you need it
A gate post is visibly leaning 2 or 3 inches, or the gate binds at the latch and will not hold plumb after adjustment.
What it costs in Cleburne
Post replacement runs between $350 and $900 per post, including concrete collar work sized for Johnson County clay soil.
How we do it
We excavate to the proper depth for this soil, set the new post with a concrete collar, and let it cure before re-hanging the gate.
Rail Repair
Signs you need it
A slide gate rail has a visible bend, or the gate grinds and catches about halfway through travel.
What it costs in Cleburne
Rail repair runs between $200 and $600 when the rail is salvageable, or $500 to $1,100 for a full rail replacement section.
How we do it
We straighten or splice the rail, re-check the wheel path, and photograph the repaired section before cycling the gate.
Custom Welding
Signs you need it
A section of pipe is rusted through, or you want a brace or gate stop added to an existing frame.
What it costs in Cleburne
Custom welding runs between $150 and $500 for typical brace, patch, or reinforcement work on acreage gates.
How we do it
We cut out the bad section, weld in new steel matched to the existing pipe size, and photograph the work before finishing.
What Gate Parts & Welding Costs in Cleburne
| Item | Typical range in Cleburne |
|---|---|
| Hinge replacement | $150 - $400 per hinge |
| Post replacement | $350 - $900 per post |
| Rail repair | $200 - $1,100 |
How deep should a gate post be set in Cleburne clay?
Post depth depends on soil and gate weight, but Johnson County clay typically needs deeper footings than sandy or loamy soil. Our written quote names the exact depth and collar size. Call (928) 260-0864 for an on-site assessment.
Can you weld my gate without removing it from the hinges?
Often, yes. Hinge and brace repairs can be done with the gate in place, while a post replacement requires removing the gate. We tell you which applies before work starts.
Brands We Service in Cleburne
We service Ghost Controls, DoorKing, Elite, and Mighty Mule operators and parts in Cleburne, along with five other major automation brands. Common parts travel with us, so most repairs are same-day. Our brands page lists what we work on and what we keep stocked.
Pricing for Gate Repair in Cleburne, TX
| Service | Typical range in Cleburne |
|---|---|
| Motor installation | $650 - $1,900 |
| Motor repair | $180 - $450 |
| Linear motor work | $320 - $850 |
| Slide motor replacement | $750 - $1,900 |
| Keypad entry | $280 - $700 |
| Remote control | $90 - $300 plus $60 - $120 per extra remote |
| Phone entry | $450 - $950 |
| Video intercom | $700 - $1,600 |
| Hinge replacement | $150 - $400 per hinge |
| Post replacement | $350 - $900 per post |
| Rail repair | $200 - $1,100 |
| Custom welding | $150 - $500 |
In Cleburne, the two things that push a price up are clay soil correction and gate weight. A tilted post has to be fixed before a new motor goes in, and acreage gates are heavier than subdivision gates. The written price on the table before work starts covers everything, including the soil work.
Neighborhoods We Serve in Cleburne
We cover the full Cleburne area, from the historic streets around the downtown square to the acreage roads spreading into Johnson County. The drive out to the south and west acreage typically adds 20 to 35 minutes to a dispatch.
- Downtown Cleburne historic district
- Nolan River Road corridor
- County Road 708 acreage area
- Mid-century ranch neighborhoods east of the square
- Newer acreage subdivisions south of US-67
Service Area - Cities Near Cleburne
Beyond Cleburne, our crews regularly run to Burleson, TX for ornament-class subdivision gates, and to Midlothian, TX for the acreage belt that runs alongside the rail line. We also serve Mansfield, MA and Arlington, MA from the same dispatch desk. If you are within a short drive of Cleburne, call and we will schedule the trip.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cleburne
A live person answers 24/7 and dispatches a background-checked, uniformed technician from the Dallas-Fort Worth area, with Cleburne jobs typically reached the same day or the next morning. The phone number is (928) 260-0864 and there is no voicemail loop.
Most gate repairs do not require a permit, but new installations with extensive concrete or electrical work may. We will name any permit requirement in the written scope before work begins, and we do not start until it is clear.
The written price covers the repair or installation as scoped, including parts, labor, soil work if specified, and the photo record of what was done. It is handed to you before work starts, and it is the price you pay unless you add to the scope in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cleburne Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.