Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Maywood, CA
Gate motor and opener repair in Maywood usually means a worn swing arm or a seized slide track on a wrought iron gate that cycles dozens of times a day. The fix typically runs between $180 and $340 for most swing-gate motor work, and most jobs are completed the same day. Call Vance Gate Repair at (928) 260-0864 and we’ll give you a written price before any work starts.
Why Maywood Homes Are Different
Maywood packs roughly 25,000 people into about 1.1 square miles, which makes it one of the densest cities in the country. Most homes are 1920s and 1930s stucco bungalows on very small lots, and the standard property boundary is a wrought iron driveway gate, not a fence. Homeowners here lean on those gates as the first line of physical security, especially since the city transitioned to LA County Sheriff patrols in 2010.
What that means for gate work is simple: the gates in Maywood work harder than gates almost anywhere else. Many bungalows are shared by two or three families behind one driveway gate, so a gate that would open four times a day on a single-family lot in Bell or Cudahy may cycle forty times a day here. We regularly find hinges, latches, and motor limit switches worn to failure on Maywood gates that are less than ten years old. The marine layer from the coast, about ten miles west, accelerates rust on ornamental iron, and heavy winter rain seizes hinges and swells any wood components. It’s a predictable pattern, and it’s why gate repair in Maywood skews toward frequent, urgent calls rather than occasional maintenance.
Our Main Maywood Services
Most Maywood homeowners call us about two things: a gate that has stopped opening, or a gate that needs to be built from scratch to secure a small lot. Both start with a written price.
Gate Repair in Maywood
Repair work in Maywood typically means a sagging wrought iron panel, a cracked hinge mount on a 90-year-old concrete post, or a motor that no longer responds to the remote. We diagnose, quote in writing, and fix it on the spot in most cases. Full details on our repair process and local pricing are on our Gate Repair in Maywood page.
Gate Installation in Maywood
New gate installations in Maywood have to account for very tight setbacks and posts that may be original to the home. We measure, design around the existing drive, and install with hardware sized for heavy daily use. Visit our Gate Installation in Maywood page for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Maywood
Gate motor and opener work in Maywood is mostly about swing arms and slide tracks that have been cycled to death on shared driveways. A motor that would last fifteen years on a quiet street may need replacement in eight here, simply because the gate opens forty or fifty times a day. Gate Motor & Opener service covers everything from a dead transformer to a full motor swap, priced in writing before we touch a wire.
Motor Installation
Signs you need it
The gate groans, stalls mid-travel, or the motor hums but doesn’t move the panel.
What it costs in Maywood
Motor installation in Maywood typically runs $350 to $780, depending on brand and whether the mounting bracket needs rework.
How we do it
We pull the old unit, set the new motor on a reinforced bracket, wire it to code, program travel limits, and hand you the photo log.
Motor Repair
Signs you need it
The gate opens an inch and reverses, or the motor trips its breaker every time the remote is pressed.
What it costs in Maywood
Motor repair in Maywood typically falls between $165 and $340, depending on the fault and the part.
How we do it
We test the board, capacitor, limit switches, and wiring, identify the failed part, and replace it with a documented record of the fix.
Linear Motor
Signs you need it
The gate’s linear arm has visible play, or the arm no longer extends smoothly along its track.
What it costs in Maywood
Linear motor replacement in Maywood typically runs $325 to $720 installed, including limit-switch setup.
How we do it
We remove the old linear unit, mount the new arm, reset the travel limits, and photograph the final positions for your record.
Slide Motor
Signs you need it
The slide gate binds at the same point every cycle, or the motor shudders and loses position on the rack.
What it costs in Maywood
Slide motor replacement in Maywood typically runs $400 to $850, depending on the gate weight and rack condition.
How we do it
We check the rack and rollers first, then install and calibrate the motor so the gate travels its full range without binding.
Intercom Integration
Signs you need it
The motor responds to a remote but not to the intercom or call box at the driveway entrance.
What it costs in Maywood
Integrating an intercom with an existing gate motor in Maywood typically runs $120 to $260 per entry point.
How we do it
We wire the intercom relay into the motor control board, test the open and close commands, and leave a wiring diagram with you.
What Gate Motor & Opener Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Motor repair | $165 - $340 |
| Motor installation | $350 - $780 |
| Linear or slide motor replacement | $325 - $850 |
How much does it cost to replace a gate motor in Maywood?
Most Maywood gate motor replacements run between $350 and $780 for standard swing-gate units, with slide and linear arms reaching $850 on heavier gates. The written quote you receive covers parts, labor, and limit-switch setup, so there’s no surprise line item at the end. Call (928) 260-0864 for an exact figure.
Can you fix a gate motor the same day in Maywood?
Yes, most motor repairs in Maywood are completed same-day. We carry common boards, capacitors, and limit switches on the truck, and the written price is agreed before any part is replaced. Call (928) 260-0864 and a live person will confirm today’s schedule.
Gate Access Control in Maywood
Access control in Maywood is often retrofitted onto gates that were never designed for it: a 1940s iron panel with a modern keypad bolted to the post, or a phone-entry unit wired into a gate that already sees heavy shared use. The goal is almost always the same, giving three or four households a reliable way in without handing out a pile of remote controls. Our Gate Access Control work covers the keypad, the wiring, and the integration with whatever motor is already on the property.
Keypad Entry
Signs you need it
The keypad works intermittently, or some codes no longer trigger the gate while others still do.
What it costs in Maywood
Keypad replacement or new keypad entry in Maywood typically runs $180 to $420 per entry point.
How we do it
We replace the keypad unit or controller, reprogram all codes, verify the relay signal to the motor, and hand you a printed code list.
Remote Control
Signs you need it
Remotes only work from ten feet away, or they no longer pair despite fresh batteries.
What it costs in Maywood
Remote programming and receiver work in Maywood typically runs $75 to $180, including new remotes where needed.
How we do it
We pair the remotes, check the receiver antenna placement, and replace splitter or relay gear if the signal is weak.
Phone Entry
Signs you need it
The phone-entry unit won’t dial out, or callers hear ringing but the gate never opens when the tenant presses their key.
What it costs in Maywood
Phone entry installation in Maywood typically runs $250 to $600 per unit, with optional dual-number system add-ons.
How we do it
We install the cellular or landline module, program the directory, and test the open command from both sides of the gate.
Card Reader
Signs you need it
The card reader flashes red on valid cards, or the gate opens unpredictably for some tenants but not others.
What it costs in Maywood
Card reader replacement in Maywood typically runs $220 to $480 per reader, including credential programming.
How we do it
We swap the reader or controller, enroll the existing cards, and log every credential in the job record we leave with you.
Video Intercom
Signs you need it
The video feed is blank, or the indoor monitor won’t ring when the outdoor station is pressed.
What it costs in Maywood
Video intercom replacement in Maywood typically runs $300 to $700, depending on monitor count and wiring condition.
How we do it
We run or repair the two-wire or four-wire line, install the new monitor and door station, and test video, audio, and gate release together.
What Gate Access Control Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Remote control programming | $75 - $180 |
| Keypad entry | $180 - $420 |
| Video intercom | $300 - $700 |
How much does it cost to add a keypad to a gate in Maywood?
Adding keypad entry to an existing Maywood gate typically costs between $180 and $420 per entry point, including the unit, wiring to the motor control board, and programming. The price is written before we start. Call (928) 260-0864 for an exact quote.
Can you add phone entry to an old gate in Maywood?
Yes, phone entry can be retrofitted onto almost any motorized gate, including the aging swing gates common on Maywood’s bungalow lots. Expect $250 to $600 per unit, with the final price confirmed in writing before installation. Call (928) 260-0864 to schedule a walkthrough.
Gate Parts & Welding in Maywood
Wrought iron gates in Maywood fail at the same few places every time: the hinge, the hinge-mount post, and the bottom rail where rust has eaten through the section. Because so many gates here are shared, a crack that would take a year to worsen in a quiet neighborhood becomes a full break in a matter of weeks. Our Gate Parts & Welding service covers on-site welding, post resetting, and rail repair on ornamental iron gates across the city.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, drags on the ground, or the hinge pin has visible play when you lift the panel.
What it costs in Maywood
Hinge replacement in Maywood typically runs $90 to $220 per hinge, including welding or bolting and realignment.
How we do it
We cut or unbolt the old hinge, weld or bolt the new one in place, level the panel, and photograph the finished weld.
Post Replacement
Signs you need it
The gate post is cracked at the base, leaning under the gate’s weight, or crumbling around the hinge bolts.
What it costs in Maywood
Post replacement in Maywood typically runs $280 to $520 per post, depending on size and whether concrete removal is needed.
How we do it
We demo the old post, set a new steel or welded post in concrete, remount the gate, and leave the concrete to cure before full loading.
Rail Repair
Signs you need it
The bottom or mid rail is rusted through, cracked, or separated from the vertical pickets.
What it costs in Maywood
Rail repair in Maywood typically runs $120 to $280 per section, including grinding, welding, and rust treatment.
How we do it
We grind out the rusted section, weld in a new steel rail or patch, treat the weld, and paint the repair to match.
Custom Welding
Signs you need it
You need a gate modified: a pedestrian cut-in, a height extension, or a new latch plate welded to match the original ironwork.
What it costs in Maywood
Custom welding in Maywood typically runs $150 to $500 per modification, quoted after we see the gate and discuss the change.
How we do it
We cut, grind, weld, and finish on site, matching the profile of the existing iron and documenting the work with photos before and after.
Gate Rollers
Signs you need it
The slide gate scrapes along its track, or the rollers are worn flat on one side and the gate no longer rolls true.
What it costs in Maywood
Gate roller replacement in Maywood typically runs $80 to $180 per roller, including bearing replacement and track cleanup.
How we do it
We swap the worn rollers, replace any seized bearings, clean the track, and test the gate through its full travel.
What Gate Parts & Welding Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Hinge replacement | $90 - $220 per hinge |
| Post replacement | $280 - $520 per post |
| Custom welding | $150 - $500 per modification |
How much does it cost to weld a gate in Maywood?
Custom welding on a Maywood gate typically costs between $150 and $500 per modification, depending on the size of the repair and the amount of grinding and finishing required. The price is quoted in writing after we inspect the gate in person. Call (928) 260-0864 to schedule a free estimate.
Can you fix a sagging wrought iron gate in Maywood?
Yes, most sagging wrought iron gates in Maywood are corrected by replacing the hinge and realigning the panel, which typically runs $90 to $220 per hinge. If the post itself has cracked, post replacement may also be needed. Call (928) 260-0864 for an exact written quote.
Brands We Service in Maywood
We work on Linear, BFT, Viking, and Ghost Controls motors in Maywood, plus most other major brands. Trucks carry common control boards, limit switches, and remotes for same-day repairs. Visit our brands page for the full list.
Pricing for Gate Repair in Maywood, CA
| Service | Typical range in Maywood |
|---|---|
| Gate motor repair | $165 - $340 |
| Gate motor installation | $350 - $780 |
| Linear or slide motor replacement | $325 - $850 |
| Remote control programming | $75 - $180 |
| Keypad entry | $180 - $420 |
| Video intercom | $300 - $700 |
| Hinge replacement | $90 - $220 per hinge |
| Post replacement | $280 - $520 per post |
| Rail repair | $120 - $280 per section |
| Custom welding | $150 - $500 per modification |
| Gate roller replacement | $80 - $180 per roller |
In Maywood, the biggest price drivers are rusted-through posts that need concrete work, shared gates with unusually high cycle counts, and ornamental ironwork that requires matching custom welds rather than off-the-shelf parts. Every quote is written and handed to you before any work begins, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in Maywood
We cover all of Maywood, from the residential blocks near Atlantic Boulevard to the homes east of the Los Angeles River and the neighborhoods around Maywood Park and the Maywood-Cudahy border. Response time for most gate repair calls in Maywood is under two hours.
- Maywood Park area
- Atlantic Boulevard corridor
- East Maywood near the LA River
- Maywood-Cudahy border blocks
- Neighborhoods around Slauson Avenue
Service Area - Cities Near Maywood
Beyond Maywood, our crews serve the surrounding southeast LA communities. We work in Bell, CA, Huntington Park, CA, Bell Gardens, CA, and South Gate, MD. Dispatch for Maywood jobs is coordinated from our Los Angeles office, with local crews on the road daily.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Maywood
Most Maywood gate repair calls are reached in under two hours. Because Maywood is less than a mile from several major dispatch corridors, trucks are typically already nearby. Call (928) 260-0864 and a live person will confirm the current response time and schedule the visit.
Residential gate repair in Maywood usually does not require a permit when the existing posts and footprint stay in place. New installations or posts that require concrete removal may need plan review. We can confirm the city’s current requirement for your specific property before work starts.
The written price covers parts, labor, and any equipment needed to complete the repair. It does not change after the work begins unless you approve additional work in writing first. Before we leave, you receive a photo record of everything we found, adjusted, or replaced, plus your final invoice.
Call Vance Gate Repair at (928) 260-0864 for a free gate repair estimate in Maywood. A live person answers 24/7, and your price is written and handed to you before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maywood Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.