Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Angeles, CA
Gate motor and opener problems are the most common calls we get across Los Angeles, and they split cleanly along the city’s geography: flat-grid Valley tract homes with aging swing operators, and hillside properties where cantilever slide gates carry the load. If your gate is grinding, stopping mid-travel, or refusing to respond to a remote, we can send a technician and a written quote before any work starts. Call (928) 260-0864 and a live person answers, day or night.
Why Los Angeles Homes Are Different
Los Angeles is not one housing market. The post-war San Fernando Valley boom of the 1950s through the 1970s added a massive stock of tubular steel and chain-link gates across flat-grid neighborhoods like Reseda, Canoga Park, and Van Nuys, where deferred maintenance and aging automated operators now generate high-volume repair demand. The hillside estates tell a different story: 1920s Spanish Colonial Revival homes in the Hollywood Hills and Laurel Canyon often retain original ornate wrought iron driveway gates that are decades overdue for hardware and motor upgrades. A technician who works both terrains sees two almost unrelated trades in one city.
Terrain is the quiet driver of half the failures. On steep canyon driveways, a swinging gate would drag on the grade or require costly excavation, so cantilever slide gates, riding on rollers anchored to a single concrete pad and carrying no bottom track, are the default. Even minor seismic activity routinely shifts concrete gate footings out of plumb across Los Angeles, causing automated operators to strain, bind, and burn out after every notable tremor. Salt air off the Pacific also pits and rusts steel gates in Venice, Santa Monica, and Pacific Palisades at a rate inland technicians rarely see.
Our Main Los Angeles Services
Most Los Angeles homeowners first reach us for one of two reasons: a gate that stopped working and needs repair, or a full replacement. Each has its own dedicated Los Angeles page.
Gate Repair in Los Angeles
Repair work in Los Angeles means diagnosing everything from misaligned photo-eyes on a Valley side gate to rusted cantilever carriages on a Bel Air slide gate. We carry parts for nine major automation brands on the truck, so most calls finish same-day with a written record of what was found and what was replaced. See the dedicated page for full detail: Gate Repair in Los Angeles.
Gate Installation in Los Angeles
New gates in Los Angeles have to match the terrain, not the other way around. Hillside properties almost always require cantilever slide gates, while flat-lot homes choose between swing and slide based on driveway width and setback. Installations include a free measure and a written price before any work is scheduled. Full scope and pricing live here: Gate Installation in Los Angeles.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Los Angeles
Motor and opener failures are the highest-volume repair category in Los Angeles because the city’s housing stock puts every weakness on display: 1950s-70s Valley tract homes run original swing operators that are now 40 to 60 years old, while hillside cantilever gates depend on linear and slide motors that earthquake-induced misalignment punishes two or three times a decade. When a motor burns out, the operator usually gives clear warning first: slower travel, a grinding sound, or intermittent remote response.
Because we service nine automation brands on-site, we rarely tell a Los Angeles homeowner they must replace a working motor when the limit switch or capacitor is the actual fault. That brand coverage includes Gate Motor & Opener systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Motor Repair
Signs you need it
The motor hums but the gate doesn’t move, or the gate intermittently stops mid-travel and reverses.
What it costs in Los Angeles
Most motor repairs in Los Angeles run $150-$400 depending on whether it’s a capacitor, limit switch, or gear assembly.
How we do it
We test the capacitor and gear assembly first, replace the failed part, reset the limit switches, and photograph every setting before we leave.
Motor Installation
Signs you need it
The existing motor is beyond repair, or the housing is cracked and moisture has reached the windings.
What it costs in Los Angeles
A new swing or slide motor installation in Los Angeles typically runs $450-$1,200 including labor, depending on brand and whether the arm bracket is intact.
How we do it
We confirm the gate panel is balanced and plumb, mount the new operator, set travel limits and force sensitivity, and hand you a written record with part numbers and photos.
What Gate Motor & Opener Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Motor repair | $150-$400 |
| Motor installation | $450-$1,200 |
| Slide motor replacement | $600-$1,500 |
Can you fix a Gate Motor & Opener the same day in Los Angeles?
Yes. Most motor repairs in Los Angeles are completed the same day because we stock capacitors, limit switches, and gear assemblies for nine automation brands on the truck. Call (928) 260-0864 for a written quote before any work begins.
Does earthquake damage affect gate motors in Los Angeles?
It does. After seismic activity shifts concrete footings out of plumb, operators strain against binding panels and burn out faster. We check gate alignment during every motor repair so the new motor isn’t working against the same fault that killed the last one.
Gate Access Control in Los Angeles
Access control problems in Los Angeles are often layered: a hillside estate might have a working slide motor but a keypad that no longer accepts codes, while a Silver Lake duplex needs a phone entry system integrated with a gate that predates digital access. The specific Los Angeles failures we see most are UV-faded keypad membranes on west-facing gates and intercom wiring corroded by salt air near the coast.
Every Gate Access Control job includes a wiring diagram and a photo record, so the next technician, or you, can see exactly what was set and installed. We service keypads, remote receivers, phone entry, card readers, and video intercoms from brands like DoorKing, Elite, Ghost Controls, and Mighty Mule.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons require hard presses, or the backlight has failed and codes won’t register at night.
What it costs in Los Angeles
Keypad replacement or repair in Los Angeles generally runs $200-$450, with most jobs completed the same visit.
How we do it
We test each key circuit, replace the membrane or the full keypad as needed, reprogram codes, and photograph the new settings.
Phone Entry
Signs you need it
Callers hear static or nothing when the gate calls your phone, or the relay no longer opens the gate after you answer.
What it costs in Los Angeles
A phone entry system replacement in Los Angeles typically runs $400-$700, including new wiring where the existing run is corroded.
How we do it
We test the phone line and relay, replace the failed unit, wire and program the new system to your number, and document the full setup.
What Gate Access Control Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $200-$450 |
| Phone entry system | $400-$700 |
| Remote receiver | $150-$300 |
Will a new keypad work with my existing Los Angeles gate motor?
Usually, yes. Most keypads in Los Angeles pair with the existing receiver or connect directly to the operator’s input terminals. We confirm compatibility before quoting so you don’t pay for a system that won’t integrate.
Does coastal salt air affect gate access control wiring in Los Angeles?
It does, especially in Venice, Santa Monica, and Pacific Palisades. We find corroded terminal blocks and frayed low-voltage wiring far more often near the coast, and we seal all outdoor connections against salt air on every access control repair.
Gate Parts & Welding in Los Angeles
Parts and welding requests in Los Angeles usually come from two directions: a homeowner with a sagging gate that needs a hinge or post repair, and a gate that took Santa Ana wind debris damage and now needs a roller or track section rebuilt. Wrought iron gates on 1920s Hollywood Hills homes are the classic case for custom welding: the panels survive, but the original hinges and bottom pickets do not.
Because we weld on-site in Los Angeles, we can repair ornate ironwork without removing the gate from the driveway. Our Gate Parts & Welding work covers everything from hinge replacement to full post resets and custom bracket fabrication, with photos of the finished weld and the part numbers used.
Hinge Replacement
Signs you need it
The gate sags and drags on the driveway, or the hinge pin has worn oval and the gate wobbles when opening.
What it costs in Los Angeles
Hinge replacement in Los Angeles runs $130-$260 per hinge, including on-site welding where the old hinge is seized.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the new one in place, and confirm the gate swings level before we leave.
Custom Welding
Signs you need it
A picket has rusted through, a top rail has cracked, or a bracket has snapped and no off-the-shelf part matches.
What it costs in Los Angeles
Custom welding in Los Angeles typically runs $170-$450 depending on the size of the repair and the thickness of the steel.
How we do it
We cut out the failed section, weld new steel into place, grind the seam smooth, and prime and paint the repair to match the existing finish.
What Gate Parts & Welding Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Hinge replacement | $130-$260 per hinge |
| Post replacement | $350-$800 |
| Custom welding | $170-$450 |
Can you weld a wrought iron gate without removing it in Los Angeles?
In most cases, yes. We weld on-site in Los Angeles driveways using portable equipment, which means ornate original gates from the 1920s don’t have to leave the property. Call (928) 260-0864 for a written quote on the specific repair.
Does the dry Los Angeles climate affect gate welds?
Less than the coastal zones. Inland Los Angeles gates hold welds well, but gates within a few miles of the ocean rust at the weld joints faster than anywhere else in the city. We prime and seal every coastal weld against salt air as standard practice.
Brands We Service in Los Angeles
We service Ghost Controls, DoorKing, Elite, Mighty Mule, and five other major gate-automation brands across Los Angeles. Most common replacement parts are stocked on our trucks, which means most repairs finish the day you call. For the full list, see our brands.
Pricing for Gate Repair in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Motor repair | $150-$400 |
| Motor installation | $450-$1,200 |
| Slide motor replacement | $600-$1,500 |
| Keypad replacement | $200-$450 |
| Phone entry system | $400-$700 |
| Remote receiver | $150-$300 |
| Hinge replacement | $130-$260 per hinge |
| Post replacement | $350-$800 |
| Custom welding | $170-$450 |
What pushes a Los Angeles gate repair toward the top of a range: a hillside cantilever gate that needs a carriage assembly, a coastal property with heavy rust on the hinge posts, or an original 1920s iron gate that needs custom fabrication because no stock part matches. Whatever the job, you get a written price before any work starts, under Haven Standard Clause 1, and that price doesn’t change at the end.
Neighborhoods We Serve in Los Angeles
We work across Los Angeles from the Valley flat-grids to the canyon switchbacks and the coastal rust belt. Most neighborhoods have a technician within a 45-minute drive, often sooner.
- Hollywood Hills
- Bel Air
- Laurel Canyon
- Reseda
- Van Nuys
Service Area - Cities Near Los Angeles
Beyond Los Angeles proper, we serve several adjacent communities in the metro area. That includes Huntington Park, CA to the southeast, South Gate, MD to the south, and Bell, CA and Maywood, CA along the LA River corridor. All of these areas receive the same written-price guarantee and same-day scheduling for gate repair.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Most Los Angeles neighborhoods have a technician within 45 minutes, and we dispatch 24/7 for emergency gate failures. A live person answers the phone at (928) 260-0864 at any hour, and the name and photo of your technician is provided before arrival.
Routine gate repair in Los Angeles, like motor replacement, hinge repair, or keypad work, does not require a permit. New gate installations and certain hillside structural changes may trigger a review, and we handle that determination during the free measure and written quote.
Everything. The written price in Los Angeles covers parts, labor, and any required adjustments, and it’s handed to you before any work starts under Haven Standard Clause 1. The price doesn’t change at the end, and a documented photo record of the completed work is included on every visit.
Call (928) 260-0864 for a free estimate on gate repair in Los Angeles. A live person answers, a written price comes before any work begins, and the job leaves a photographed record.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.