Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in New Braunfels, TX
Gate motor and opener failure is the most common call we get from New Braunfels homeowners, and it usually hits the 2010s-era builder-installed operators first. Homes in Veramendi, Vintage Oaks, and Havenwood are aging into their first major service cycle at the same time, which means a lot of swing and slide operators spec’d for cost are now failing within weeks of each other. The Hill Country humidity and the February freeze cycles don’t help. If your gate won’t open, is grinding, or stops halfway, call (928) 260-0864 and we’ll give you a written price before any work starts.
Why New Braunfels Homes Are Different
The gate stock in New Braunfels splits into two distinct groups. The first is the massive wave of master-planned community construction from the 2010s and 2020s: Veramendi, Vintage Oaks, Havenwood, and similar subdivisions where tract builders installed ornamental iron or tubular-steel driveway gates with economy-tier automation. Those units were chosen for cost, not longevity, and they are now hitting their first major service cycle all at once. Gearboxes wear out, circuit boards fail, and limit switches drift on units that were never adjusted after installation.
The second group sits closer to the historic downtown and along the Comal and Guadalupe river corridors. These are older properties with custom wrought-iron or ranch-style pipe gates, often original to mid-century German-heritage homesteads. They need fabrication work and part replacement rather than simple operator swaps, and the river humidity has usually gotten to the lower hinge hardware first. We stock stainless and hot-dip galvanized hardware for riverside jobs because zinc-plated components rust through within two flood seasons on the Guadalupe.
Our Main New Braunfels Services
Most New Braunfels homeowners reach out to us for one of two reasons: an existing gate has stopped working correctly, or they want a new gate built and installed. Both start with a written price.
Gate Repair in New Braunfels
When a gate stops mid-travel, sags on its hinges, or the operator makes noise but the gate doesn’t move, we diagnose the specific fault and document it. New Braunfels repair work often involves both the mechanical side and the automation side, since humidity and freeze cycles stress both. We photograph what we find and hand you a written scope before any tool touches the gate. Gate Repair in New Braunfels
Gate Installation in New Braunfels
A new gate in New Braunfels needs to be spec’d for the local soil and the local humidity. The limestone and caliche substrate under much of the Hill Country means posts need to be set differently than they would be in clay-soil markets. We quote the full installation in writing, including the post depth, the hinge hardware grade, and the operator you choose. Gate Installation in New Braunfels
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in New Braunfels
Gate motor and opener service in New Braunfels is dominated by the aging cohort of builder-grade swing and slide operators installed across the master-planned subdivisions during the 2010s boom. Those units are now failing together, and most of them were never adjusted after the builder’s final walkthrough. The February 2021 freeze and subsequent hard freezes cracked plastic limit-switch housings and seized gearboxes on units that were never rated for sub-20 degree weather. We service whatever Gate Motor & Opener is already on the property across nine major automation brands, and we hand you a written price before the first screw comes out.
Motor Repair
Signs you need it
The gate hums but doesn’t move, moves erratically, or reverses without warning.
What it costs in New Braunfels
Most motor repairs in New Braunfels run between $180 and $400, depending on whether the fault is in the limit switch, the capacitor, or the gearbox.
How we do it
We test the motor under load, identify the failed component, and photograph the reading before and after the repair.
Slide Motor
Signs you need it
A slide gate shudders, stalls, or grinds along the track because the motor is fighting the gate’s weight.
What it costs in New Braunfels
Slide motor replacement in New Braunfels typically runs between $450 and $900, depending on the motor’s duty rating and whether the rack and pinion gear is reusable.
How we do it
We measure the gate’s travel and weight to size the motor correctly, then set the limit switches and document the full installation.
What Gate Motor & Opener Costs in New Braunfels
| Item | Typical range in New Braunfels |
|---|---|
| Motor repair | $180 - $400 |
| Motor replacement | $350 - $750 |
| Slide motor replacement | $450 - $900 |
Can you fix a gate motor the same day in New Braunfels?
Yes, in most cases. We stock common motors and limit-switch parts for the brands most common in New Braunfels subdivisions, so a straightforward motor repair is usually handled the same day. Call (928) 260-0864 for an exact time and a written price.
Why did my gate motor stop after the freeze?
The hard freezes in New Braunfels crack plastic limit-switch housings and seize gearboxes on units not rated for sub-20 degree temperatures. We inspect the housing and gearbox first, then photograph the damage and replace only what failed.
Gate Access Control in New Braunfels
Gate access control in New Braunfels has moved well beyond the basic remote on the sun visor. Master-planned communities like Veramendi and Vintage Oaks often need phone entry or video intercom for visitors, and older riverfront properties are adding keypads for rental turnover. Humidity shortens the life of outdoor keypads, and freeze cycles stress the wiring inside. We service Gate Access Control from the keypad to the operator’s control board, and we leave a documented photo record of every connection we touch.
Keypad Entry
Signs you need it
You want visitors or service providers to enter without giving them a remote, or you are tired of replacing lost remotes.
What it costs in New Braunfels
Keypad entry installation in New Braunfels typically runs between $250 and $600, depending on whether the keypad is wired or wireless and how far it sits from the operator.
How we do it
We mount the keypad at the right height for drivers, wire or program it to the operator, and test every code before we leave.
Video Intercom
Signs you need it
You want to see who is at the gate before you open it, or you need a record of who entered and when.
What it costs in New Braunfels
Video intercom installation in New Braunfels typically runs between $500 and $1,200, depending on whether the system is standalone or tied into a phone app.
How we do it
We mount and aim the camera, wire the audio and video to the indoor monitor or mobile app, and walk you through the final test.
What Gate Access Control Costs in New Braunfels
| Item | Typical range in New Braunfels |
|---|---|
| Keypad entry installation | $250 - $600 |
| Remote control programming | $50 - $150 |
| Video intercom installation | $500 - $1,200 |
Do you install access control that works from a phone in New Braunfels?
Yes. We install phone entry and video intercom systems that open the gate from an app, so you can let in a delivery while you are at work. Call (928) 260-0864 for a written quote.
Can you replace an access control keypad the same day?
Usually, yes. We keep common weather-resistant keypads on hand, and most replacements are straightforward. We always confirm the new keypad works with the operator’s existing control board before we leave.
Gate Parts & Welding in New Braunfels
Gate parts and welding in New Braunfels splits into two jobs: replacing worn parts on the 2010s subdivision gates, and fabricating repairs on older custom iron gates near the historic downtown and the river corridors. The Comal and Guadalupe humidity accelerates rust pitting on unpainted hardware and eats through cheap powder-coat within three to five years. Riverside gates corrode from the bottom up where seasonal flooding submerges the lower hinges. Our Gate Parts & Welding work covers both the off-the-shelf part and the custom fabrication, with a written price before the torch is lit.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinges show rust scale and pitting at the bottom pin.
What it costs in New Braunfels
Hinge replacement in New Braunfels typically runs between $150 and $400 per hinge set, depending on the gate’s weight and whether the post has rusted too.
How we do it
We lift the gate, cut out the old hinges, weld in new hardware rated for the gate’s weight, and photograph the work before it is painted.
Custom Welding
Signs you need it
A crack has formed in the gate frame, a decorative finial is broken off, or you want the gate reinforced instead of replaced.
What it costs in New Braunfels
Custom welding in New Braunfels typically runs between $200 and $800, depending on the length of the crack and whether the gate needs to be removed for the repair.
How we do it
We grind the crack to clean metal, weld it in passes to avoid warping the frame, and photograph the finished bead.
What Gate Parts & Welding Costs in New Braunfels
| Item | Typical range in New Braunfels |
|---|---|
| Hinge replacement | $150 - $400 per hinge set |
| Custom welding | $200 - $800 |
| Gate rollers | $100 - $300 per roller |
Can you weld a cracked gate frame in place in New Braunfels?
Yes, if the crack is accessible and the gate still hangs true. We grind to clean metal, weld in passes, and photograph the finished bead before you sign off. Call (928) 260-0864 for a written quote.
Do you use stainless hardware on New Braunfels riverfront gates?
Yes. Riverside gates on the Guadalupe and Comal corrode from the bottom up, so we spec stainless or hot-dip galvanized hinges and fasteners on any job near the water. Zinc-plated hardware rusts through within two flood seasons.
Brands We Service in New Braunfels
We work on whichever automation brand is already on your gate. In New Braunfels that means a lot of Viking, Ghost Controls, DoorKing, and Elite operators, and we stock common parts for each. If your motor is one of those, we can usually repair it without waiting on a shipment. See our brands for the full list.
Pricing for Gate Repair in New Braunfels, TX
| Service | Typical range in New Braunfels |
|---|---|
| Motor repair | $180 - $400 |
| Motor replacement | $350 - $750 |
| Slide motor replacement | $450 - $900 |
| Keypad entry installation | $250 - $600 |
| Remote control programming | $50 - $150 |
| Video intercom installation | $500 - $1,200 |
| Hinge replacement | $150 - $400 per hinge set |
| Custom welding | $200 - $800 |
| Gate rollers | $100 - $300 per roller |
In New Braunfels, riverfront proximity pushes rust-related work higher because stainless and hot-dip galvanized hardware costs more than standard zinc-plated components. The master-planned subdivision gates tend to be cheaper to repair because the operators are common and we stock the parts. Every job gets a written price before work starts, and that price does not change unless you approve a change in scope.
Neighborhoods We Serve in New Braunfels
We cover all of New Braunfels and the surrounding corridor, from the subdivision gates in the master-planned communities to the custom iron gates along River Road. Response time is typically same-day for motor and opener calls, and scheduled within a few days for fabrication work.
- Veramendi
- Vintage Oaks
- Havenwood
- Historic downtown New Braunfels
- River Road and the Guadalupe riverfront
Service Area - Cities Near New Braunfels
Beyond New Braunfels, our crews serve the surrounding Hill Country corridor. We work in Cibolo, TX, Schertz, TX, Converse, TX, and Kyle, TX. Scheduling is coordinated from our San Antonio office, but the crews and the parts run locally.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in New Braunfels
Most gate motor and opener emergencies in New Braunfels are handled same-day. A live person answers the phone at (928) 260-0864 day or night, so you will talk to a dispatcher, not a voicemail loop. We tell you who is coming and when before they arrive.
Depends on your subdivision. Some New Braunfels HOAs require prior approval for gate replacement or operator changes; others only care about the exterior color. We document what we install and can provide specs for your HOA before work starts.
Always. The written price is handed to you before any tool touches the gate, and it does not change unless you approve a change in scope. That applies to every New Braunfels job, from a hinge replacement to a full motor swap.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What New Braunfels Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.