Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Cibolo, TX
Most gate failures we see in Cibolo, TX come down to one of two things: an opener that was installed as a builder incentive item in the mid-2000s and never serviced, or gate posts that have shifted on the Blackland Prairie clay that underlies this part of the metro. The good news is that neither problem requires a full gate replacement in most cases. We repair gate motors, control boards, safety sensors, hinges, and welded joints in Cibolo the same way we handle them in every neighborhood: a written price before any work starts, and a documented photo record when we leave. Call (928) 260-0864 and a live person answers, any hour.
Why Cibolo Homes Are Different
Cibolo has been one of the fastest-growing cities in the country, and the housing stock tells that story in a very specific way. The overwhelming majority of homes here were built between roughly 2005 and the present, in master-planned subdivisions like Turning Stone, Saddle Creek, and Cibolo Cove. What that means for gate work is simple: nearly every automated driveway gate in these neighborhoods is a builder-grade ornamental iron system of nearly identical age. And they are all hitting their first major service window at the same time. Technicians working Cibolo are not chasing a diverse stock of gate styles. We are servicing a dense, concentrated wave of aging, HOA-governed iron gates where operators, hinges, and hardware fail in the same cycle across entire subdivisions.
Under the surface, Cibolo sits on Blackland Prairie expansive clay. That soil swells dramatically when wet and cracks and shrinks in the prolonged summer drought. Gate posts heave, tilt, and settle unevenly. That is why sagging gates and misaligned latches are so common here: it is soil movement, not just hinge wear. Add the rare-but-severe hard freezes like February 2021, and you get motor housings and control boards exposed to ice damage that a subtropical climate does not prepare homeowners to protect against.
Our Main Cibolo Services
Two services generate the most calls from Cibolo homeowners, and each has its own dedicated page with full pricing and local detail.
Gate Repair in Cibolo
Repair work in Cibolo means diagnosing the specific failure, whether that is a misaligned photo-eye, a burned relay, a snapped hinge pin, or a post that has tilted out of plane. Because most gates in this area are HOA-governed and must match specific finishes, we document what we find, quote the repair in writing, and leave a photo record of everything we touched. Gate Repair in Cibolo covers the full scope of what we fix.
Gate Installation in Cibolo
When replacement is the right call, installation in Cibolo usually means working within HOA covenants that dictate style, finish, and sometimes the exact hardware package. We handle that approval layer rather than asking you to. The work includes removing the old gate, setting posts properly for the local soil, hanging and squaring the new gate, and installing the opener of your choice. Gate Installation in Cibolo breaks down the process and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Cibolo
Gate motor and opener service in Cibolo is shaped by one fact: in many subdivisions here, the automated opener was a builder incentive item installed last during construction, often the cheapest available unit. That means motors, circuit boards, and safety sensors on homes built as recently as 2015 may have never been serviced and are now past their rated cycle life. Our Gate Motor & Opener work covers the full range: we test the board, read the limit switches, inspect the arm or chain drive, and quote the repair or replacement in writing before touching a tool.
Motor Repair
Signs you need it
The gate opens halfway and reverses, or hums without moving, or works intermittently after rain.
What it costs in Cibolo
Motor repair in Cibolo typically runs $175 to $525, depending on whether it is a board, capacitor, gear, or limit switch issue.
How we do it
We open the housing, test the board and capacitor with a meter, read and photograph the limit switch positions, replace the failed part, and reset travel limits.
Motor Installation
Signs you need it
The existing motor is over 10 years old, replacement parts are discontinued, or the gear train is stripped beyond economical repair.
What it costs in Cibolo
A new gate motor installation in Cibolo runs $600 to $2,900, depending on brand, horsepower, and whether new safety sensors or a receiver board are needed.
How we do it
We match the motor to the gate weight and duty cycle, install the new unit on the existing mount or fabricate a new one, wire it to the board, install or reposition photo-eyes, and set travel limits and obstruction sensitivity.
What Gate Motor & Opener Costs in Cibolo
| Item | Typical range in Cibolo |
|---|---|
| Motor repair | $175 to $525 |
| Motor installation | $600 to $2,900 |
| Circuit board replacement | $210 to $550 |
How long does a gate motor repair take in Cibolo?
Most motor repairs are completed in one visit, typically 1 to 2 hours. If a board or motor must be ordered, we quote the wait time in writing before starting. Call (928) 260-0864 and we will tell you what the schedule looks like for the brand on your gate.
Do you work on builder-installed gate motors in Cibolo?
Yes. Builder-installed openers in Turning Stone, Saddle Creek, and Cibolo Cove are by far the most common units we service. We do not steer you toward a replacement you do not need. The quote is written before work begins.
Gate Access Control in Cibolo
Access control in Cibolo means keypads, remotes, phone entry, and card readers on gates that are often the only physical barrier between a subdivision home and open access. Many of these systems were wired by the builder’s low-voltage contractor, and we frequently find loose terminations, corroded keypad contacts, and receivers that were never programmed to the homeowner’s actual remotes. Our Gate Access Control service covers diagnosis, repair, and new installation, always with a written price first.
Keypad Entry
Signs you need it
The keypad is unresponsive, the code works intermittently, or the face has cracked and let moisture into the board.
What it costs in Cibolo
Keypad entry repair or replacement in Cibolo runs $220 to $620, depending on whether the wiring is intact or needs to be re-pulled.
How we do it
We open the keypad housing, test voltage at the terminals, check wiring continuity back to the control board, and repair or replace the unit and reprogram codes.
Remote Control
Signs you need it
The gate only opens from the in-house button, or some remotes work and others do not, or range has dropped to a few feet.
What it costs in Cibolo
Remote control repair, programming, or receiver replacement in Cibolo runs $120 to $400, depending on the receiver type and how many remotes need programming.
How we do it
We identify the receiver frequency and protocol, test the existing remotes, replace the receiver if it has failed, and program every remote on site.
What Gate Access Control Costs in Cibolo
| Item | Typical range in Cibolo |
|---|---|
| Keypad entry repair or replacement | $220 to $620 |
| Remote control programming or receiver replacement | $120 to $400 |
| Phone entry system installation | $1,500 to $3,900 |
Will a new keypad work with my existing gate motor?
Almost always, yes. Keypads are wired to the open-command terminals on the control board, not proprietary to the motor. We confirm compatibility during the written quote. Estimates are free, and the number is (928) 260-0864.
Can I program my own gate remote?
Some remotes can be self-programmed if the receiver is in learn mode and you have the instructions. But if the receiver is a builder-installed unit without a manual, we can program it in one visit and leave you the documentation. Call (928) 260-0864 and we will tell you what you have.
Gate Parts & Welding in Cibolo
Parts and welding work in Cibolo is dominated by ornamental iron gates, which means hinge pins in barrel hinges wear, lower pickets rust at the base where they contact concrete in wet years, and posts shift on expansive clay until the gate no longer latches. We weld on site when the gate needs it, and we order the right replacement hardware for the specific gate style rather than grinding down a generic part. Our Gate Parts & Welding service covers everything from a single hinge pin to a full post replacement.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the top hinge shows visible play, or you can lift the gate half an inch at the free end.
What it costs in Cibolo
Hinge replacement in Cibolo runs $175 to $480 per hinge, depending on the hinge type and whether the post is square or has shifted.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the new one in place, and adjust the gate so it swings and latches without binding.
Post Replacement
Signs you need it
The post leans visibly, the gate gap changes between visits, or cracks radiate through the concrete footer at the post base.
What it costs in Cibolo
Post replacement in Cibolo runs $600 to $1,650, depending on post height, whether it is a gate post or a latch post, and how much of the footer must be broken out.
How we do it
We dig out the old footer, set a new post in concrete at the correct depth for the local clay, let it cure, and rehang the gate square and level.
What Gate Parts & Welding Costs in Cibolo
| Item | Typical range in Cibolo |
|---|---|
| Hinge replacement | $175 to $480 per hinge |
| Post replacement | $600 to $1,650 |
| On-site welding repair | $275 to $780 |
My iron gate is rusted at the bottom. Can you weld it, or does it need replacement?
In most cases we can weld a rusted picket or bottom rail, then treat and repaint to match the HOA-required finish. Replacement is only needed when the rust has eaten through more than about a third of the section. Call (928) 260-0864 for a written assessment.
Do you match the existing gate finish after welding?
Yes. For HOA-governed Cibolo communities like Turning Stone and Saddle Creek, finish matching is part of the written quote. We photograph the gate before and after so the record is complete.
Brands We Service in Cibolo
We service the gate motors and openers already installed across Cibolo, not just one brand we happen to sell. That means Ghost Controls motors on a Saddle Creek driveway gate, DoorKing units in Cibolo Cove, Elite openers on a Turning Stone courtyard, and Mighty Mule operator kits anywhere they were installed as builder incentive items. Parts for these brands are stocked locally at our metro warehouse, so most repairs are same-visit. See our brands for the full list.
Pricing for Gate Repair in Cibolo, TX
| Service | Typical range in Cibolo |
|---|---|
| Motor repair | $175 to $525 |
| Motor installation | $600 to $2,900 |
| Circuit board replacement | $210 to $550 |
| Keypad entry repair or replacement | $220 to $620 |
| Remote control programming or receiver replacement | $120 to $400 |
| Phone entry system installation | $1,500 to $3,900 |
| Hinge replacement | $175 to $480 per hinge |
| Post replacement | $600 to $1,650 |
| On-site welding repair | $275 to $780 |
What pushes a Cibolo job toward the high end of these ranges is usually soil-related post movement, which requires resetting before the mechanical work can proceed, and HOA finish-matching requirements that dictate specific paint or powder coat. Every price we quote is written and handed to you before any work starts, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Cibolo
We work in all of Cibolo, with most of our gate repair and motor service concentrated in the 2000s-and-newer subdivisions where builder-grade automated gates predominate.
- Turning Stone
- Saddle Creek
- Cibolo Cove
- Buffalo Crossing
- Steel Pointe
Response time for gate service across Cibolo is typically same-day for emergency motor or latch failures, with next-day standard scheduling for most quoted repair work.
Service Area - Cities Near Cibolo
In addition to Cibolo, our technicians serve the surrounding metro communities from the San Antonio office. We work regularly in Schertz, TX, Converse, TX, and New Braunfels, TX, as well as throughout San Antonio, TX.
Serving Cibolo, TX - Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cibolo
We dispatch technicians to Cibolo from the San Antonio office, and most homes within the city can be reached the same day for a gate that will not open or will not latch. A live person answers the phone 24/7 at (928) 260-0864, and we will tell you when we can be there before you hang up.
For repairs that match the existing finish and hardware, most Cibolo HOAs do not require prior approval. For replacements, or for any change to style or finish, approval may be needed. We provide photos and part numbers for your submission, and in many cases we can handle the paperwork with the management company directly.
The written price includes parts, labor, and any disposal of the old component. There is no trip charge to diagnose a gate in Cibolo, no fee to produce the quote, and no change to the figure unless you approve a change to the scope in advance. If the problem is not what we diagnosed, we re-quote in writing before proceeding.
Call (928) 260-0864 for a free estimate on gate repair, gate motor service, access control, parts, or welding in Cibolo. A live person answers, day or night, and every job starts with a written price you approve before we begin.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cibolo Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.