Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Plantation
Most gate repairs in Plantation take us under two hours once we’re on site, and we schedule same-week for most communities along Broward Boulevard, West Sunrise, and the canal-grid neighborhoods east of Flamingo Road. If your HOA entrance gate is stuck open or your driveway swing gate won’t close, call (928) 260-0864 and you’ll speak to a live person, not a voicemail queue, any hour of the day. We’ve been repairing gates since 2014, and we’ve worked enough Plantation subdivisions to know exactly what fails in this housing stock: builder-grade operators from the 1975-1995 window, flooded conduit runs, and sagging ornamental aluminum hinges. You’ll get a written price before any work starts, every single time.
Why Vance Gate Repair Is Plantation’s Preferred Gate Repair Company
Plantation was built as one of Broward County’s first master-planned cities, and the result is a concentration of HOA entrance gates that you won’t find anywhere else in South Florida. Most subdivisions here went up in a tight twenty-year window between 1975 and 1995, which means their original gate operators are now aging out together. We get calls from communities across Jacaranda Lakes, Plantation Acres, and the neighborhoods flanking Central Park where three or four gates need operator replacements in the same season. That clustered demand rewards a company that stocks legacy parts and knows when a repair is no longer worth the labor.
Every Plantation visit leaves you with a documented photo record: what we found, what we adjusted, what part number went in. Under The Haven Standard, that record is yours to keep, filed in the job record, and available to any future technician. We also hand you a written price before we pick up a tool, so there’s no invoice surprise at the end. If another company quoted you something and you want a second read, bring us the paperwork. We’ll review it free.
Our technicians are background-checked and uniformed, and you’ll get the name and photo of your technician before arrival. We don’t farm out or subcontract. For Plantation, the dispatcher who takes your call coordinates from our South FL office in Miami, and the crew that shows up knows Plantation’s streets, HOA gate protocols, and the specific hardware that lives in this market.
Our Gate Repair Services in Plantation

Automatic Gate Repair
Automatic gate repair in Plantation typically runs $180-$420 depending on what’s failed: a bad limit switch, a burnt control board, a seized motor capacitor, or a flooded loop detector under the driveway apron. We service what’s already on your property. We don’t push a replacement unless the parts are obsolete and the cost to retrofit no longer makes sense. When we do recommend replacement, we’ll show you why with the failed component in hand. This applies to both HOA entrance gates and residential driveway gates across Plantation.

Hinge & Post Repair
Plantation’s masonry-wall communities built in the 1975-1995 window used a lot of ornamental aluminum and wrought-iron swing gates, and the hinges on those gates carry more weight than they were ever designed for. We regularly see hinge bolts sheared at the post, sag at the latch side of two to four inches, and posts that have shifted out of plumb in the sandy, high-water-table soil near the canal grid. Hinge and post repair in Plantation generally runs $220-$650, including realigning the gate to swing true and welding any cracked bracket work.

Gate Realignment
If your gate drags across the driveway, binds at the catch, or won’t stay latched, the problem is usually not the operator. It’s the geometry. We’ll check post settlement, hinge wear, and whether the operator’s travel limits were ever set correctly in the first place. On one Jacaranda Lakes job, the limit switch was set a full twelve degrees past travel; we reset it, re-photographed the new position, and the gate has closed clean ever since. Gate realignment in Plantation runs $150-$350 for most single-gate adjustments.

Electric Gate Repair
Electric gate repair covers the low-voltage side: loop detectors, photo-eyes, keypads, and the control wiring that runs through underground conduit. In Plantation, the water table sits just inches below grade thanks to the canal grid, and the May-through-October wet season floods conduit runs under driveways routinely. That means recurring detector failures and fried control boards. We pull new wire, replace the loop, and test the detector before we leave. Most electric gate repairs in Plantation fall between $160 and $480 depending on the conduit run and what’s submerged.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Plantation
We repair nine major gate-automation brands, and for Plantation we’re especially familiar with BFT, Linear, and Viking hardware because those were common in the 1980s-era HOA buildouts across this city. Ghost Controls also shows up on newer residential driveway gates in the Plantation Acres estate lots. We keep common replacement boards and parts stocked for Plantation customers, so we don’t have to wait on a distributor when your community’s gate is down. If you’ve got an obsolete Linear or Eagle operator with a discontinued board, we’ll tell you straight whether a retrofit board makes sense or whether a full operator replacement is the cheaper long-term move.
Common Gate Repair Problems We See in Plantation Homes

- Builder-grade operators aging out across whole communities: Most Plantation HOA gates were installed between 1975 and 1995 with Linear or Eagle operators that have since been discontinued. When the control board dies, there’s no direct replacement part. We stock legacy swap-out boards where available and default to full operator replacements when the parts channel is gone.
- Flooded underground conduit runs: Plantation’s canal-grid water table sits inches below the driveway surface. During the wet season, underground low-voltage wiring runs flood, shorting loop detectors and control boards. We pull new wire, seal the conduit where we can, and document every splice so the next technician knows what’s buried where.
- Missing or non-functional safety photocells on older swing gates: Many gates installed before UL 325 entrapment standards were enforced still operate without working photo-eyes. That’s a liability for any HOA board. We check photo-eye alignment on every Plantation call and flag any gate that’s non-compliant before someone leans a bike against the post.
- Sagging ornamental aluminum gates at the latch side: The two-to-four-inch sag we see on Plantation’s 30-to-50-year-old swing gates is rarely the operator’s fault. It’s hinge wear, post settlement, and thirty years of humidity working on the bracket welds. Realignment plus hinge replacement gets the gate closing flush again without touching the motor.
Pricing for Gate Repair in Plantation, FL
Here are the numbers we quote most often in Plantation. A typical automatic gate repair runs $180-$420. Hinge and post repair lands between $220-$650. Gate realignment is $150-$350. A full electric gate diagnosis with loop detector replacement ranges $160-$480 depending on the conduit run. If your operator is a 1980s-era Linear with a dead board and no replacement part exists, you’re looking at a full operator replacement, which in Plantation typically runs $850-$2,400 installed depending on the gate’s size, weight, and wind-load rating. Every one of those prices is written down and handed to you before any work starts. No verbal estimates, no invoice discovery at the end. Call (928) 260-0864 for a free estimate, and bring us any competing written quote for a second opinion.
We Also Serve Cities Near Plantation

Our crews cover Plantation and the surrounding Broward County communities, including Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. If your HOA has multiple gates spread across city lines, we can schedule the work as one project. For the full scope of what we do, see our Gate Repair services page, and for specific details on how we cover this city, read more about Gate Repair in Plantation.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Plantation

Because Plantation’s subdivisions were largely built in a tight 1975-1995 window, and the original gate operators installed during that period are now reaching end-of-life at roughly the same time. Linear, Eagle, and early LiftMaster units from that era used control boards that manufacturers have discontinued, so when one community gate fails, its neighbor is often months behind. Call (928) 260-0864 and we’ll assess your remaining gates before they fail.
Yes, Broward County’s post-Hurricane Andrew wind-load permitting requirements apply to residential swing-gate replacements in Plantation, even when the gate itself isn’t changing. We’ve handled enough of these to know the process, and we’ll flag the requirement before any work starts so an out-of-area contractor doesn’t leave you with an unpermitted installation and a surcharge later.
Water enters the conduit run, shorts the low-voltage loop detector or control board, and your gate either stops responding or behaves erratically. We pull new low-voltage wire, replace the damaged loop, and document the splice locations in our photo record. This is a recurring Plantation problem from May through October. Call (928) 260-0864 for a diagnosis.
Yes, and we do it regularly in Plantation’s newer developments where builders installed a manual ornamental gate with no operator. We’ll run the power and conduit that should have gone in during the build, mount the operator, set the travel limits, and leave you with a wiring diagram and photo record of the entire install. Written pricing before work starts.
Check the hinge bolts first; if they’re sheared or worn, the gate will drop at the latch no matter how well the operator runs. Plantation’s humidity and sandy soil accelerate hinge wear and post settlement. We’ll realign the gate, replace worn hinges, and photograph the before-and-after so you can see what changed. Call (928) 260-0864 for an assessment.
Contact Vance Gate Repair for Plantation Gate Service
If your Plantation gate won’t close, won’t open, or just sounds wrong, call (928) 260-0864. You’ll speak to a live person, any hour, any day. We’ll schedule a time that works for your HOA or your household, send a named technician with a photo before arrival, and hand you a written price before any work begins. Free estimates, free second opinions on competing written quotes, and a 365-Day Done Right Promise on every repair we complete. Serving Plantation and nearby Broward County communities from our South FL office in Miami, with crews on the ground in Plantation weekly.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Plantation since 2014.





Before
After
Before
After