Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Fordham
Gate repair in Fordham, NY runs about $220 to $480 for most residential calls and $350 to $900 for commercial roll-down gate work along Fordham Road, with the price set in writing before we touch a tool. We’re the Gate Repair company that shows up with a name and a photo of the technician, hands you a flat price, and leaves a photo log of exactly what we found and fixed. If your pre-war iron courtyard gate is sagging off its pintles or your storefront gate froze halfway down at 3 a.m., call (928) 260-0864 and a live person answers, no voicemail loop.
Why Vance Gate Repair Is Fordham’s Preferred Gate Repair Company
Fordham runs on gates. The commercial strip along Fordham Road is protected after hours by hundreds of roll-down and accordion security gates, and the residential side streets are lined with pre-war walk-ups whose ornamental iron vestibule doors and courtyard gates date back to the 1910s through 1940s. Those two facts shape every day of our work here. When a bodega’s gate binds at midnight, the owner loses revenue and takes a security risk simultaneously. When a rowhouse iron gate sags off its hinges, the tenant can’t secure the building. We’ve worked enough jobs in this neighborhood to know the difference between a gate that needs twenty minutes of realignment and one whose bottom bar is rust-swollen beyond saving.
Customers in Fordham get a written price before any work begins. That’s Haven Standard Clause 1, and we don’t bend it. You also get a documented photo record on every visit: the corrosion we found, the weld we made, the limit switch setting we corrected, the part number we installed. No other gate company working Fordham that we know of hands you evidence like that. Every one of our 22,000+ gates repaired and installed since 2014 has left a paper trail and a photo trail. Adrian Vance started this company in 2014 out of commercial access-control work, and the documentation habit stuck. Every visit to Fordham gets the same treatment, whether it’s a walk-up on Creston Avenue or a storefront on the Grand Concourse side of Fordham Road.
Technicians dispatched to Fordham are background-checked and uniformed. You get a name and a photo before we arrive.
Our Gate Repair Services in Fordham

Electric Gate Repair
Most electric gate failures in Fordham break down into three groups: control board failures on older operators, misaligned photo-eyes, and corroded wiring connections. The freeze-thaw cycle in the Bronx runs 30 to 40 times per winter, and that repeated expansion and contraction works every terminal and splice loose over time. We service nine automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a board is obsolete and no longer manufactured, we’ll tell you that honestly and write up your retrofit options in dollars before you decide anything.

Automatic Gate Repair
Automatic gates in Fordham fail for predictable reasons: limit switches drift, gearboxes strip, and safety photocells fall out of alignment. A photo-eye (the infrared beam that stops the gate if something crosses the path) misaligned by two inches will keep the gate from closing. We set it, photograph the new position, and note the reading in the job record. If your older automatic gate on Fordham Road is stuck mid-travel with no safety photocell working, that’s both an operational and a safety issue. We’ll assess what can be retrofitted under current safety requirements and give you the written number.

Hinge & Post Repair
Pre-war iron gates in Fordham sag because the original pintles and hinge post footings have loosened or rotted over 80 to 100 years of weather and use. The gate leaf hangs low, scrapes the stoop, and eventually won’t latch. Fixing this properly involves resetting or replacing the post footing, fitting new pintles, and realigning the leaf so it travels true. This is substantially cheaper than full gate replacement, but it’s not a cosmetic repair: a post that’s rotted at the base has to be addressed, not painted over. We’ll show you photos of the footing before and after.

Gate Realignment
Along Fordham Road, the dominant repair call is not springs or motors. It’s bottom astragal bars that have corroded and bound in floor tracks after a few winters of road salt and constant foot traffic. We cut out the swollen section, weld in a new steel bottom bar, and realign the tracks so the gate rolls without fighting the guides. For commercial roll-down gates, this is the bread-and-butter repair. We also realign residential swing and sliding gates in Fordham’s rowhouses and walk-ups, where frame warping and hinge wear push the gate leaf off its travel path.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Fordham
We work on whatever motor is already on your gate. Ghost Controls boards, DoorKing operators, Elite slide motors, Mighty Mule swing arms, LiftMaster commercial trolleys, FAAC and BFT hydraulic units, Linear actuators, Viking equipment. We carry common control boards, safety edges, photo-eyes, limit switches, and hinge hardware on the truck, which means fewer return trips to Fordham for parts. If we need something uncommon, we tell you on the first visit, in writing, with the part number.
Common Gate Repair Problems We See in Fordham Homes

- Salt-corrosion on roll-down bottom bars: Fordham Road’s sidewalks get heavy road salt all winter, and slush sits in the floor tracks of every commercial roll-down gate along the corridor. Within three to four winters, the bottom astragal bars rust-swollen and bind, and the gate either sticks halfway or refuses to seal at the floor. The fix is bottom-bar replacement plus track realignment.
- Worn pintles and rotted hinge post footings on pre-war iron gates: The five- and six-story brick walk-ups built between the 1910s and 1940s still carry many of their original ornamental vestibule and courtyard gates. Pintles wear, post footings loosen or rot, and the leaf sags until it drags on the pavement.
- Obsolete operator control boards on older commercial storefronts: After years of freeze-thaw cycling, aged control boards fail and leave the gate stuck mid-travel, often with no functioning photo-eye. The gate becomes a hazard and a liability. We assess what’s retrofit-compatible and price the options in writing.
- Misaligned photo-eyes and limit switches on residential automatic gates: Gates that reverse for no reason or stop short of closing usually have a photo-eye or limit switch problem, not a motor problem. We test, adjust, and photograph the final settings, then leave you the readings.
Pricing for Gate Repair in Fordham, NY
Here are the real ranges we see in Fordham, written the way we’d hand them to you on paper:
| Repair | Typical Fordham Range |
|---|---|
| Hinge & pintle replacement (residential iron gate) | $280 - $560 |
| Gate realignment (residential swing or sliding) | $220 - $420 |
| Bottom astragal bar replacement (commercial roll-down) | $350 - $700 |
| Track realignment (commercial roll-down) | $300 - $550 |
| Weld repair (wrought iron, per section) | $180 - $380 |
| Control board replacement (depends on brand/model) | $450 - $1,100 |
| Safety edge or photo-eye retrofit | $280 - $520 |
| Full service call & diagnostic | $110 - $160 |
These are written prices, not estimates whispered over the phone. We hand you the number before work starts. If another company gave you a written estimate, bring it to us and we’ll review it at no cost under our free second opinion policy. Every Fordham job is backed by the 365-Day Done Right Promise: if the repair isn’t right, we make it right within a full year, no argument, no fee. Call (928) 260-0864 and we’ll schedule a time with a live person on the phone.
We Also Serve Cities Near Fordham

Our Gate Repair in Fordham team also covers the surrounding boroughs. We schedule work across Fordham, New York City, Brooklyn, Queens, and Manhattan. If your gate is down near the Fordham Road corridor or anywhere in the Bronx, one call gets a written price and a named technician.
Serving Fordham, NY - Our Local Coverage Area
We’re based in the Fordham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fordham

Your bottom astragal bar is almost certainly rust-swollen from road salt and binding in the floor guides. Fordham Road’s sidewalks get heavy salt all winter, and slush sits in the floor tracks and eats through the bottom bar’s steel within a few seasons. The motor is fine; the track and bottom bar are the problem. We cut out the corroded section, weld in a new steel bar, and realign the tracks so the gate clears. Call (928) 260-0864 and we’ll quote it in writing before we start.
Usually yes. The leaf is sagging because the original pintles are worn or the hinge post footing has rotted or loosened. We reset the footing, fit new pintles, and realign the leaf so it travels and latches. The ornamental iron itself is often in perfectly serviceable condition. We’ll show you the footing condition in photos before we decide anything. Replacement is only the honest recommendation when the gate frame itself is rusted through structurally.
The quickest checks: does the gate reverse when a photo-eye beam is broken, and does it have a working safety edge that stops the gate on contact? If your gate is stuck mid-travel with no photocell protection, it fails both the practical and the safety test. We assess existing equipment against current UL 325 and NYC code requirements, then give you a written retrofit price for a new safety edge, photo-eyes, and any required control wiring. Call (928) 260-0864 for an exact quote.
Fordham’s pre-war gates are heavier, older, and exposed to 30 to 40 freeze-thaw cycles per winter. That repeated expansion and contraction works hinge hardware loose, and the dense urban setting means more gate cycles per day than a suburban Westchester driveway. Worn pintles and hinge post deterioration are the direct result. We replace the worn hinge hardware and reset what’s loosened, and we note the replacement in your photo log.
In many cases we can retrofit a new safety edge, keypad, and monitored photo-eyes onto an existing operator, especially if the motor and gearbox are still sound. The limiting factor is the operator’s control board: some older boards don’t support monitored safety inputs. If it’s retrofit-compatible, we’ll tell you and price it in writing. If it isn’t, we’ll show you why and write up a board replacement price. We never steer you toward replacement when a retrofit works.
Why Fordham Gate Failures Are Different
Here’s what a generic gate repair page won’t tell you about Fordham: the dominant failure mode along Fordham Road is salt corrosion and foot-traffic track wear on commercial roll-down gates, not spring replacements or motor burnouts. Walk any block of the corridor after a winter and you’ll see rust staining at the base of half the roll-downs. Snow melts, mixes with rock salt, and pools in the floor guides. Constant foot traffic works the slush into the tracks. Within a few winters, the bottom bars are swollen and the gates bind. That’s why bottom-bar replacement and track realignment is the bread-and-butter call here, not motor work.
On East Fordham Road near the Grand Concourse, we got a 3 a.m. call from a bodega whose roll-down gate had frozen halfway down, its bottom astragal bar so rust-swollen from road salt that it bound in the floor guides. Our tech cut out the corroded bar, welded in a new steel section, and realigned the tracks. Gate back down and locked before the morning rush. That call is so common in this neighborhood it doesn’t feel like an emergency to us anymore. It’s just Tuesday on Fordham Road.
The residential side of Fordham has its own signature: pre-war five- and six-story walk-up buildings and attached brick rowhouses still carrying original ornamental iron entry gates from the early 20th century. These gates sag because their pintles and post footings have aged out. The iron itself is often beautiful, dense, and worth saving. The hardware holding it true is what fails. We respect the difference, and we’re not going to sell you a new gate when the old one needs a new hinge and a realignment.
If your gate is binding, sagging, or stuck in Fordham, call (928) 260-0864. A live person answers. You’ll get a written price before work starts, a photo record when we leave, and a full year of the Done Right Promise behind the repair.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Fordham and the surrounding Bronx since 2014.





Before
After
Before
After