Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Fordham, NY
Gate motor and opener service in Fordham is dominated by one thing: salt. The Bronx puts down heavy road salt all winter on Fordham Road and the surrounding side streets, and that salt works its way into every track, hinge, and circuit board on both residential gates and the commercial roll-downs that line the retail corridor. Repairing a gate motor here usually means dealing with corrosion before you ever touch the motor itself. If your gate is stuck, grinding, or refusing to move, call us at (928) 260-0864 and we’ll send a technician to Fordham with the parts to fix it same day.
Why Fordham Homes Are Different
Fordham’s gate work splits into two distinct markets that most companies treat as one. Along Fordham Road, you have independent retailers, electronics shops, bodegas, and clothing stores, virtually all of which rely on steel roll-down or accordion security gates that get pulled down every night and opened every morning. Those gates eat salt. Slush from the sidewalk gets kicked into the floor tracks, sits there overnight, and corrodes the bottom astragal bar and floor guides within a few winters. Gate techs who work this stretch see more bottom-bar replacements and track realignments than any other repair, and after-hours calls are the norm because nobody closes a store mid-day to fix a gate that won’t open.
On the residential side, Fordham’s stock is pre-war brick walk-ups from the 1910s through 1940s, five and six stories tall, many with original wrought-iron vestibule and courtyard gates. Those gates have pintles that have worn oval, hinges that have rusted through decades of freeze-thaw cycles, and frames that have warped out of square. The Bronx averages 30 to 40 freeze-thaw cycles per winter, and each one expands and contracts the old iron, fatiguing welds and loosening post anchors. Attached rowhouses from the same period add pedestrian gate work on side streets throughout the neighborhood.
Our Main Fordham Services
Most Fordham property owners call us for two things: fixing the gate they already have, and installing a new one when the old iron has finally failed. Both services start with a written price before any work begins.
Gate Repair in Fordham
Whether it’s a sagging wrought-iron vestibule gate on a pre-war walk-up or a roll-down security gate that’s bound up on Fordham Road, repair work in Fordham usually starts with corrosion. Pinpointing the exact failure, quoting a flat price in writing, and completing the fix with a photo record of everything we touched is the entire job. For full detail on repair scope and pricing, see our Gate Repair in Fordham page.

Gate Installation in Fordham
New gate installation in Fordham means matching an older building’s existing ironwork or installing a commercial-grade roll-down for a storefront. We measure, source, and install with the same documentation habit: written scope, written price, and photos of the finished install. For full detail on installation scope and pricing, see our Gate Installation in Fordham page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Motor & Opener in Fordham


Gate motor and opener repair in Fordham is a corrosion problem before it is a mechanical one. The salt-laden slush that accumulates along Fordham Road and its side streets works its way into motor housings, corrodes control boards, and seizes limit switches. Most gate motors and openers we service here are one to three winters old when the first failure appears, and the fix usually involves cleaning corrosion off the limit switch assembly, rewiring a corroded connection, or replacing a board that salt spray has shorted. Our Gate Motor & Opener service covers motor installation, repair, and testing across all major brands, and we carry replacement boards and limit switch kits on the truck so most Fordham jobs finish same day.
Motor Repair
Signs you need it
The gate moves in one direction only, hums without moving, or the motor trips its breaker after every cycle.
What it costs in Fordham
Motor repair in Fordham typically runs $175-$350, depending on whether the failure is a corroded limit switch or a shorted control board.
How we do it
We pull the motor cover, photograph the corrosion or burned component, write the part number and labor price on the spot, and complete the repair once you approve the written price.
Motor Installation
Signs you need it
The motor housing is cracked or the armature is seized and the unit is beyond repair.
What it costs in Fordham
A new gate motor installation in Fordham typically runs $600-$1,200 depending on brand, gate weight, and whether the arm bracket and chain are reused.
How we do it
We pull the old motor, inspect and photograph the bracket and gear condition, install the new unit, set the travel and force limits, and leave you a photo record of every setting.
What Gate Motor & Opener Costs in Fordham
| Item | Typical range in Fordham |
|---|---|
| Motor repair | $175-$350 |
| Motor installation | $600-$1,200 |
| Limit switch / capacitor replacement | $95-$185 |
Can you fix my gate motor the same day in Fordham?
Yes. We stock common control boards, capacitors, and limit switch kits for Ghost Controls, DoorKing, and Elite motors on our trucks, so most Fordham calls finish same day. Call (928) 260-0864 and we’ll tell you what’s on the truck when you call.
What happens to my old gate motor?
We remove and recycle the old unit at no extra charge. You get a written record of the new motor’s part number and a photo of the finished install before we leave.
Gate Access Control in Fordham


Access control in Fordham is less about convenience and more about who can get into a building. Pre-war walk-ups often have one shared courtyard gate that every tenant uses, and the intercom or keypad on that gate is the building’s only true lock. When salt or age kills the keypad or intercom, tenants get locked out, deliveries pile up on the sidewalk, and the super ends up keying people in manually. Our Gate Access Control service covers keypads, card readers, phone entry, and video intercoms, and we handle the entire install from the gate to the panel inside the vestibule.
Keypad Entry
Signs you need it
The keypad works in warm weather but not cold, some numbers don’t register, or the code stopped working entirely.
What it costs in Fordham
A new keypad entry system in Fordham typically runs $350-$800 installed, depending on run length and whether a new strike or maglock is needed.
How we do it
We replace the keypad, run new low-voltage wire if the old run is corroded, program the codes, and photograph the wiring at both ends for the job record.
Video Intercom
Signs you need it
Tenants can’t see who is at the gate, the audio works but video doesn’t, or the intercom panel is cracked and unreadable.
What it costs in Fordham
A video intercom install in Fordham typically runs $850-$1,800 depending on the number of indoor stations and whether we’re replacing existing wiring or running new.
How we do it
We pull the old panel, run fresh cable where the old run is compromised, mount the new video panel, pair it to the indoor monitors, and hand you a written record of every connection.
What Gate Access Control Costs in Fordham
| Item | Typical range in Fordham |
|---|---|
| Keypad entry system | $350-$800 |
| Video intercom | $850-$1,800 |
| Card reader / fob system | $400-$900 |
Can you install a keypad on a commercial roll-down gate in Fordham?
Yes. Keypads and card readers work on roll-down gates just as well as swing gates. We mount the reader on the housing and wire it to the existing operator. Call (928) 260-0864 for a free estimate.
Does a Fordham apartment building need a permit for a new intercom?
Low-voltage access control work like keypads and intercoms typically doesn’t require a permit, but we confirm before any install. If an electrical permit is required, we handle the paperwork and include it in the written price.
Gate Parts & Welding in Fordham


Gate parts and welding in Fordham is where the old iron and the salt meet. Hinges on pre-war wrought-iron gates have been rusting for 80 or 90 years, and the bottom bars of commercial roll-downs on Fordham Road corrode through in a handful of winters. We repair what is worth keeping, fabricate what has to be replaced, and weld it all with a written record of what was done. Our Gate Parts & Welding service covers hinge replacement, post replacement, rail repair, custom welding, and gate rollers.
Hinge Replacement
Signs you need it
The gate sags and drags on the ground, the hinge pin is visibly worn or rusted, or the gate scrapes the frame when it opens.
What it costs in Fordham
Hinge replacement in Fordham typically runs $150-$400 per hinge set, including welding the new barrel or leaf hinge to the gate and post.
How we do it
We cut or unbolt the old hinge, grind the mounting surface clean, weld the replacement in place, and photograph the new hinge before and after paint.
Gate Rollers
Signs you need it
The gate jumps the track, sits crooked, or requires two hands to slide.
What it costs in Fordham
Gate roller replacement in Fordham typically runs $120-$300 per roller set, including track cleaning and realignment.
How we do it
We lift the gate off the track, pull the old rollers, install the new set, clean the track, and reset the gate so it slides with one hand.
What Gate Parts & Welding Costs in Fordham
| Item | Typical range in Fordham |
|---|---|
| Hinge replacement | $150-$400 |
| Gate roller replacement | $120-$300 |
| Custom welding (per hour) | $95-$150 |
Can you weld a broken wrought-iron gate on-site in Fordham?
Yes. We do on-site welding for most cosmetic and structural repairs using a portable MIG or stick welder. The finished weld is ground, primed, and painted to match the existing metal. Call (928) 260-0864 for a written quote.
Do you stock parts for old pre-war gate hardware in Fordham?
For common hardware like pintles, barrel hinges, and roller sets, yes. For obsolete or ornamental pieces, we fabricate the part to match. We photograph the original before removal so the replacement matches visually.
Brands We Service in Fordham

We service Ghost Controls, DoorKing, Elite, and Mighty Mule gate operators in Fordham, along with five other major brands. We stock common replacement parts for these brands on our trucks, which is what lets us finish most Fordham calls in a single visit. See our brands page for the full list.
Pricing for Gate Repair in Fordham, NY
| Service | Typical range in Fordham |
|---|---|
| Motor repair | $175-$350 |
| Motor installation | $600-$1,200 |
| Limit switch / capacitor replacement | $95-$185 |
| Keypad entry system | $350-$800 |
| Video intercom | $850-$1,800 |
| Card reader / fob system | $400-$900 |
| Hinge replacement | $150-$400 |
| Gate roller replacement | $120-$300 |
| Custom welding (per hour) | $95-$150 |
Two things push Fordham gate repair prices up faster than other neighborhoods: salt corrosion, which turns a simple hinge job into a multi-part replacement, and the pre-war iron on older buildings, which often needs custom fabrication to match. You’ll get your written price before any work starts, and that price is the price. No surprise line items on the invoice.
Neighborhoods We Serve in Fordham

We cover all of Fordham, from the retail stretch of Fordham Road up to the residential side streets around Poe Park and Fordham University. Our normal response to a Fordham call is under 90 minutes for emergency gate failures.
- Fordham Road retail corridor
- Poe Park area
- Fordham University perimeter
- Belmont border
- West Fordham side streets
Service Area - Cities Near Fordham
From Fordham we dispatch to the surrounding Bronx and across the city where the subway and bridges allow. We handle gate work throughout New York City, NY, as well as Brooklyn, NY, Queens, NY, and Manhattan, NY. For any surrounding area, the same written-price promise applies.
Serving Fordham, NY - Our Local Coverage Area

We’re based in the Fordham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fordham
We aim for under 90 minutes anywhere in Fordham, including nights and weekends. A live person answers the phone 24/7 at (928) 260-0864, and the technician dispatches directly to your address with the parts already on the truck.
Most roll-down gate repairs, including motor replacement and track work, do not require a permit because they’re classified as maintenance. If a structural issue or sidewalk work triggers a permit requirement, we identify it during the estimate and include the paperwork in your written price.
Every visit leaves you a written record of what we found, what we replaced, and what we set. That includes photos of the corroded part we pulled off, the new part installed, and the final readings on limit switches or force settings. No future technician has to guess what we did.
Call (928) 260-0864 for a free estimate on any gate repair in Fordham. A live person answers, the price is written before work starts, and the job record is yours to keep.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fordham Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.





Before
After
Before
After