Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in West Palm Beach, FL
Most gate failures in West Palm Beach start with the motor or the operator board, and the salt-laden air off the Atlantic accelerates that failure by years. We open with Gate Motor & Opener work because that’s the call we get most from Flamingo Park, El Cid, and the gated communities along Military Trail and Haverhill Road. If your gate won’t open, won’t close, or reverses mid-travel, call (928) 260-0864 and a live person answers, day or night.
Why West Palm Beach Homes Are Different
West Palm Beach sits at the center of one of the densest concentrations of HOA-governed gated communities in the United States. From the master-planned developments along Military Trail and Haverhill Road to the estate enclaves near the Intracoastal Waterway, nearly every gate repair here involves coordinating with an HOA board, matching community-wide access-control systems shared across hundreds of units, and obtaining aesthetic approval before a swing arm is touched. That bureaucratic layer is almost nonexistent in neighboring cities like Boynton Beach or Lake Worth.
Salt-laden air off the Atlantic and the Intracoastal Waterway accelerates oxidation of hinges, motor housings, and electrical terminals year-round, often corroding gate operator circuit boards within 3 to 5 years when marine-grade protective coatings weren’t applied. Hurricane season adds wind-load stress to operators and posts; Palm Beach County’s post-2004 code revisions require a 160+ mph design standard, so non-compliant gate hardware flagged during a repair can trigger a full permit-required replacement. The urban core, including Flamingo Park, El Cid, and Northwood, holds 1920s to 1950s Mediterranean Revival and Masonry Vernacular homes with ornate wrought-iron pedestrian gates that are often original and require custom fabrication rather than off-the-shelf parts.
Our Main West Palm Beach Services
Two services anchor what we do in West Palm Beach: repair of the mechanical structure and full installation when a gate has reached the end of its life. Here’s what each involves locally.
Gate Repair in West Palm Beach
A typical repair call in West Palm Beach involves hinges seized by salt corrosion, a motor board shorted from moisture intrusion, or a post that shifted after a storm. We document what we find with photos, write the price before any work starts, and match the repair to the existing hardware rather than steering you toward a replacement. For the full scope of what we repair, see Gate Repair in West Palm Beach.
Gate Installation in West Palm Beach
New gate installation in West Palm Beach means wind-load compliant posts, marine-grade fasteners, and operators sized for the gate’s actual weight and travel. If your HOA requires a specific aesthetic or a community-standard operator, we coordinate that before the first hole is dug. For the full process and what it covers, see Gate Installation in West Palm Beach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in West Palm Beach
Gate motors in West Palm Beach fail most often from moisture and salt intrusion into the circuit board, which is why we see operator boards from coastal properties corrode within 3 to 5 years. The fix is usually a board replacement or a full motor swap, not a whole new gate, and we’ll tell you which one the evidence supports. That’s the work covered under Gate Motor & Opener, and we service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Motor Installation
Signs you need it
The motor hums but the gate doesn’t move, or the gate moves a few inches and stops, or the motor case shows visible rust bloom and water staining.
What it costs in West Palm Beach
Motor installation in West Palm Beach typically runs $425 to $900 depending on the brand and whether the arm bracket and mounting plate can be reused.
How we do it
We remove the old operator, inspect the mounting plate and arm bracket for corrosion, install the new motor, set travel limits, and photograph the final setup for your record.
Motor Repair
Signs you need it
The gate opens but won’t close, closes but won’t open, or the motor makes a grinding noise when it runs.
What it costs in West Palm Beach
Motor repair in West Palm Beach typically runs $175 to $400 for limit switch replacement, capacitor failure, or control board diagnosis and repair.
How we do it
We test the limit switches and capacitor first, then the board; we repair or replace the failed component and leave you a photo of every connection we touched.
Linear Motor
Signs you need it
Your linear arm operator is slow, noisy, or has stopped responding to the remote and keypad entirely.
What it costs in West Palm Beach
Linear motor replacement in West Palm Beach typically runs $500 to $900, including travel-limit setting and force adjustment.
How we do it
We remove the old linear arm, mount the new unit, set open and close limits, and verify the obstruction-sensing reverse function before we leave.
Slide Motor
Signs you need it
The slide gate jerks, stalls mid-travel, or the motor runs but the gate doesn’t budge, usually pointing to a stripped drive gear.
What it costs in West Palm Beach
Slide motor repair or replacement in West Palm Beach typically runs $450 to $950 depending on horsepower and whether the drive gear and chain are salvageable.
How we do it
We inspect the drive gear first, then the motor, replace what failed, re-tension the chain, and document the gear condition with photos.
Intercom Integration
Signs you need it
Visitors can ring the intercom but you can’t hear them, or you can hear them but the gate release button no longer works.
What it costs in West Palm Beach
Intercom integration with an existing gate operator in West Palm Beach typically runs $350 to $750, depending on whether the intercom is wired or wireless and the operator’s control board type.
How we do it
We map the existing control board terminals, wire or pair the intercom, test the release relay, and photograph the final wiring for your file.
What Gate Motor & Opener Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Motor installation | $425 - $900 |
| Motor repair | $175 - $400 |
| Linear motor replacement | $500 - $900 |
| Slide motor replacement | $450 - $950 |
| Intercom integration | $350 - $750 |
How much does a gate motor cost in West Palm Beach?
A new gate motor in West Palm Beach runs $425 to $900 installed, depending on brand and mounting condition. Coastal properties may need marine-grade boards, which sit at the higher end. Call (928) 260-0864 for a written quote.
Can you fix a gate motor the same day in West Palm Beach?
Yes. We keep common LiftMaster, FAAC, DoorKing, and Viking parts on our trucks, so motor repairs in West Palm Beach are often completed in one visit.
Gate Access Control in West Palm Beach
Gate access control in West Palm Beach often means matching a proprietary system that an HOA or property manager already runs, and DoorKing telephone-entry panels dominate many communities here. The job is as much about programming and integration as wiring. Our Gate Access Control work covers keypads, card readers, phone entry, and video intercoms, and we can work inside whatever platform your community already uses.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, or the buttons have gone soft and unresponsive from moisture exposure.
What it costs in West Palm Beach
Keypad entry installation or replacement in West Palm Beach typically runs $250 to $650, including programming and weatherproofing.
How we do it
We remove the failed keypad, install the new one with a sealed backplate, program the codes you want, and photograph the wiring before closing it up.
Remote Control
Signs you need it
The remote works from ten feet but not from the street, or it stopped opening the gate entirely after a storm.
What it costs in West Palm Beach
Remote control replacement and programming in West Palm Beach typically runs $75 to $200 per remote, including receiver pairing.
How we do it
We test the receiver antenna first, replace remote units as needed, and reprogram all existing remotes so the system stays consistent.
Phone Entry
Signs you need it
Visitors buzz the phone entry panel but it never rings your phone, or it rings but the gate release fails.
What it costs in West Palm Beach
Phone entry system installation or reprogramming in West Palm Beach typically runs $400 to $850, depending on whether the panel is reused or replaced.
How we do it
We wire or pair the phone entry panel to the gate operator, set the directory if needed, test the release relay, and document the final configuration.
Card Reader
Signs you need it
The card reader beeps but doesn’t release the gate, or it only works with some residents’ cards while rejecting others.
What it costs in West Palm Beach
Card reader replacement or integration in West Palm Beach typically runs $300 to $600, including reader mounting and format matching.
How we do it
We match the reader format to the existing card system, replace or rewire the reader, and test it with live cards before we leave.
Video Intercom
Signs you need it
The video intercom shows a black screen or the audio works but the image doesn’t change when a visitor arrives.
What it costs in West Palm Beach
Video intercom installation or repair in West Palm Beach typically runs $450 to $950, including camera alignment and operator wiring.
How we do it
We check the camera module and cable runs first, replace what failed, and photograph the finished installation for your record.
What Gate Access Control Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Keypad entry | $250 - $650 |
| Remote control programming | $75 - $200 |
| Phone entry system | $400 - $850 |
| Card reader | $300 - $600 |
| Video intercom | $450 - $950 |
How much does a gate access control system cost in West Palm Beach?
A gate access control system in West Palm Beach runs $250 to $950 per component, depending on the type: keypads sit at the low end, video intercoms at the high end. Call (928) 260-0864 for a written price.
Can you integrate with an HOA’s existing access system in West Palm Beach?
Yes. We work inside DoorKing, LiftMaster, and FAAC systems already installed across West Palm Beach communities, so no HOA has to rip out its infrastructure.
Gate Parts & Welding in West Palm Beach
Wrought-iron pedestrian gates in Flamingo Park, El Cid, and Northwood are often original to 1920s and 1950s homes, meaning replacement parts don’t exist off the shelf. We fabricate, weld, and reforge, which is the whole point of our Gate Parts & Welding service. Salt corrosion in West Palm Beach attacks hinges and posts year-round, so steel here needs marine-grade treatment and, often, custom work to match original detailing.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the swing, or the hinge pin has visible rust and play.
What it costs in West Palm Beach
Hinge replacement on a West Palm Beach gate typically runs $150 to $400 per hinge, including welding the new hinge to the post and gate.
How we do it
We cut or grind off the failed hinge, weld a new one to match the gate’s weight, and photograph the weld before and after.
Post Replacement
Signs you need it
The gate post leans visibly, has a crack at the base, or moves when you push on the gate.
What it costs in West Palm Beach
Post replacement in West Palm Beach typically runs $300 to $800 depending on post size, concrete footing depth, and whether the gate must be re-hung the same day.
How we do it
We cut out the failed post, set a new one in concrete to wind-load depth, reattach the gate, and document the footing before backfilling.
Rail Repair
Signs you need it
The gate’s horizontal rail is cracked, bowed, or pulling away from the vertical pickets.
What it costs in West Palm Beach
Rail repair in West Palm Beach typically runs $200 to $500, including steel section replacement and rust treatment.
How we do it
We cut out the damaged rail section, weld in new steel, treat the weld area for corrosion, and photograph the repair.
Custom Welding
Signs you need it
Your gate has missing scrollwork, broken pickets, or an ornament that no supplier can match from stock.
What it costs in West Palm Beach
Custom welding in West Palm Beach typically runs $150 to $600 depending on the complexity and whether we match original scrollwork or fabricate a new design.
How we do it
We fabricate the piece in-shop, weld it onto the gate on site, and photograph the finished work against the original for your record.
Gate Rollers
Signs you need it
The slide gate is noisy, the wheels wobble, or the gate has worn a flat groove into the track.
What it costs in West Palm Beach
Gate roller replacement in West Palm Beach typically runs $150 to $350 per roller set, including track cleaning and alignment.
How we do it
We replace the roller set, align the gate on the track, and photograph the new rollers and their final position.
What Gate Parts & Welding Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Hinge replacement | $150 - $400 per hinge |
| Post replacement | $300 - $800 |
| Rail repair | $200 - $500 |
| Custom welding | $150 - $600 |
| Gate rollers | $150 - $350 per set |
Can you match the original ironwork on an old West Palm Beach gate?
Yes. We fabricate matching scrollwork and pickets in-shop for older Flamingo Park and El Cid homes, then weld them on site. Call (928) 260-0864 for a written quote.
How much does gate welding cost in West Palm Beach?
Gate welding in West Palm Beach runs $150 to $600 per job, depending on whether we’re repairing a rail or fabricating custom scrollwork.
Brands We Service in West Palm Beach
We service Gate Motor & Opener, Gate Access Control, and Gate Parts & Welding across all nine major automation brands, including DoorKing, Viking, and Ghost Controls systems common in West Palm Beach. Common parts for these brands stay stocked on our trucks, so most board-level and mechanical repairs happen in one visit. See our brands for the full list.
Pricing for Gate Repair in West Palm Beach, FL
| Service | Typical range in West Palm Beach |
|---|---|
| Motor installation | $425 - $900 |
| Motor repair | $175 - $400 |
| Linear motor replacement | $500 - $900 |
| Slide motor replacement | $450 - $950 |
| Intercom integration | $350 - $750 |
| Keypad entry | $250 - $650 |
| Remote control programming | $75 - $200 |
| Phone entry system | $400 - $850 |
| Card reader | $300 - $600 |
| Video intercom | $450 - $950 |
| Hinge replacement | $150 - $400 per hinge |
| Post replacement | $300 - $800 |
What pushes a West Palm Beach gate repair toward the top of these ranges is usually salt corrosion that has spread from the failed part into the surrounding hardware. The written price we hand you before any work starts is the price you pay, full stop, under the Haven Standard.
Neighborhoods We Serve in West Palm Beach
We dispatch across the whole city with a standard same-day response for most repair calls.
- Flamingo Park
- El Cid
- Northwood
- Military Trail corridor gated communities
- Haverhill Road developments
Service Area - Cities Near West Palm Beach
Beyond West Palm Beach, we cover the surrounding county: Palm Beach Gardens, FL, Royal Palm Beach, FL, Wellington, FL, and Lake Worth, FL. Dispatch is coordinated from our South Florida office, with local crews serving West Palm Beach daily.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Palm Beach
Same-day response is standard for most gate repair calls in West Palm Beach. A live person answers at (928) 260-0864 any hour, and we dispatch the nearest local technician.
Often yes. Many West Palm Beach HOAs require written approval before any gate hardware or finish is changed, especially in master-planned communities. We coordinate with your board or property manager before work begins.
Yes. Every job gets a written, flat price before any work starts, under Haven Standard Clause 1. No hourly billing surprises, no verbal estimate that changes halfway through.
If your gate is down, making noise, or refusing to close, call (928) 260-0864. We answer live, 24 hours a day, from our South Florida dispatch office, and we’ll have a background-checked technician at your West Palm Beach gate with a written price in hand.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Palm Beach Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.