Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bonita Springs
Gate repair in Bonita Springs usually falls into two categories: the operator failed, or the structure failed. Storm surge, salt air, and 30-year-old HOA gate systems make those failures happen earlier here than almost anywhere else in Lee County. We respond to Bonita Springs gates every day, and most diagnosis calls are scheduled the same day. A written price comes before any work starts, every time. Call (928) 260-0864 and you’ll get a live person, not a voicemail.
Why Vance Gate Repair Is Bonita Springs’s Preferred Gate Repair Company
Bonita Springs gates fail differently than gates in Naples or Fort Myers. The salt air near Estero Bay rusts hinge pins and post bases from the inside out. Hurricane Ian crushed buried conduit under dozens of HOA gate aprons in 2022, and those failures are still surfacing. We know what that looks like because we’ve dug up enough of those aprons to recognize the pattern before we start digging.
Adrian Vance started this company in 2014 doing commercial access-control work, where every service call required a written record. That habit carried over to every residential gate we touch. When our crew leaves your property, you get a photo log of what was found, what was adjusted, and what was replaced. The part numbers are written down. The limit-switch settings are documented. Under Clause 4 of The Haven Standard, that photo record is included on every visit at no additional charge.
Our Gate Repair team works on nine major automation brands, so we’re not going to steer you toward replacing a motor we happen to sell. We service what’s already bolted to your gate. And every repair carries the 365-Day Done Right Promise: if it’s not right within a year, we make it right. No fee, no argument.
For Bonita Springs homeowners and HOAs, that means one call handles the operator, the hinges, the posts, the wiring, and the documentation your community manager needs for the board meeting.
Our Gate Repair Services in Bonita Springs
Most Bonita Springs gate work involves HOA common property, which means a community association manager needs to approve the scope before anyone picks up a tool. We’ve coordinated with CAMs across Pelican Landing, Bonita Bay, Spanish Wells, and dozens of smaller communities. We know what documentation they need and we provide it as part of the job.
Electric Gate Repair
Electric gate repair in Bonita Springs typically starts with the control board, the limit switches, or the photo-eyes. Photo-eyes (the infrared beams that stop a gate when something crosses the path) get knocked out of alignment by routine wind and traffic, and salt corrosion is hard on their wiring connections. We diagnose the actual failure before replacing parts. Most electric gate repairs run $160-$420 depending on what’s actually failed.
Automatic Gate Repair
Automatic gate repair covers the operator, the arm or rack, and the safety circuitry that keeps the gate from closing on a car or a person. On Bonita Springs swing gates, the operator is often a 1990s-era LiftMaster, Elite, or FAAC unit whose control board was discontinued years ago. When that board fails, the repair is a full board replacement, not a component fix. Automatic gate operator repairs in Bonita Springs typically run $280-$680 before any board replacement.
Hinge & Post Repair
Hinge and post repair is the most structural work we do on Bonita Springs gates. Salt air near Barefoot Beach and the Imperial River corridor eats through galvanized hinge posts in as few as five years. The rust starts inside the post, at the base, where you can’t see it until the post snaps. We weld new hinge plates, reinforce post bases, and replace rusted-through material before it fails catastrophically. Post replacement and hinge work typically runs $350-$950 per post, depending on whether we’re rebuilding in place or replacing the post entirely.
Gate Realignment
A gate that drags, scrapes, or won’t latch is usually out of alignment. In Bonita Springs, that misalignment is often the secondary effect of post movement from saturated soil or storm surge. We re-square the gate, reset the hinge clearance, and adjust the operator’s limit switches so the motor isn’t fighting a binding gate. Realignment without structural repair runs $120-$260.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bonita Springs
We service whatever motor is already on your gate. BFT, Linear, Viking, and Ghost Controls are common on Bonita Springs gates, and we stock the boards, arms, and safety components our local customers need most. We don’t push brand replacement when repair makes more sense. If a Linear arm bracket is intact and the limit switch failed, we replace the switch and document the setting. That’s the whole job.
Common Gate Repair Problems We See in Bonita Springs Homes
- Buried conduit crushed by Hurricane Ian surge. The operator tests fine because it’s fine. The loop detector or photo-eye wiring under the asphalt apron is crushed or corroded, which causes intermittent failures for weeks. We dig up the apron, rerun the conduit, and re-seal the footing.
- Rusted hinge posts snapping at the base. Communities closest to the water see galvanized steel fail from the inside out within five years. The break is hidden below grade until the post lets go. We replace with marine-grade stainless fixings where the HOA budget allows.
- Discontinued control boards on 1990s-era operators. When the board on a LiftMaster, Elite, or FAAC unit from the 1990s fails, there is no component-level repair. The board is obsolete. We source direct-fit replacements and carry the old board info into the documentation.
- Safety photo-eye misalignment from wind and traffic. Salt corrosion on the mounting hardware accelerates what would be a minor adjustment elsewhere. We re-aim, re-torque, and photograph the new position so the next adjustment doesn’t start from scratch.
Pricing for Gate Repair in Bonita Springs, FL
Gate repair pricing in Bonita Springs is driven by what actually failed. Electric gate repairs usually run $160-$420. Automatic gate operator repairs run $280-$680, plus parts if the control board is discontinued. Hinge and post repair runs $350-$950 per post. Gate realignment runs $120-$260. Weld and rust repair on steel gates runs $180-$520 depending on how much material needs to be cut out and replaced.
Every one of those numbers gets put in writing before we start. You approve the flat price, we do the work, the invoice matches the quote. No surprises at the end. Call (928) 260-0864 for a free estimate on any Bonita Springs gate repair.
We Also Serve Cities Near Bonita Springs
Our gate repair crews cover Gate Repair in Bonita Springs and the surrounding area, including Estero, Naples, Lehigh Acres, and Fort Myers. Same written-price policy, same photo-record documentation, same 365-Day Done Right Promise on every job.
Serving Bonita Springs, FL - Our Local Coverage Area
We’re based in the Bonita Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bonita Springs
Hurricane Ian’s storm surge flooded or crushed the buried conduit under many Bonita Springs HOA gate aprons. The above-ground operator and hinge post look undamaged, but the loop detector wiring or safety photocell circuit is compromised underground. The gate works intermittently because the electrical connection is partial. Fixing it requires digging up the apron, rerunning the conduit, and re-sealing the footing before the above-ground equipment gets touched. Call (928) 260-0864 for a free assessment, and we’ll tell you whether we suspect buried wiring before we ever break ground.
Yes, but not by as much as the label suggests. Salt air near Estero Bay corrodes galvanized posts from the inside out at the base, where moisture wicks up from the soil. Galvanized buys you roughly two to three years over painted steel in that environment, but neither lasts much beyond five years near Barefoot Beach. We recommend stainless fixings and marine-grade coatings for any replacement post within a mile of the water. The written quote will show the difference.
The FAAC boards from that era were discontinued years ago, and no repair parts are manufactured for them. Component-level repair isn’t possible when the components no longer exist. The repair is a full board replacement with a direct-fit current model, and we document the old board part number and the new board part number in the photo record so your HOA files have a clean audit trail. Call (928) 260-0864 and we’ll identify your exact board before recommending replacement.
Buried loop detector and photo-eye wiring that got flooded or crushed is the most common post-surge failure on Bonita Springs swing gates. The operator runs fine, the gate doesn’t move or moves erratically, and above-ground inspections find nothing wrong. Technicians who swap the operator without checking the buried wiring leave the gate broken. We check the buried circuit before replacing any above-ground component. That sequence is why communities keep calling us back after other shops left.
Entrapment protection on an automatic gate is the system of photo-eyes, edge sensors, and force settings that stops the gate if something is in the path. After any repair on a Bonita Springs community gate, we test every entrapment device, photograph the results, and include the readings in the written documentation. If a photo-eye is dead or a force setting is too high, it’s flagged immediately. That testing is part of our standard service, not an upcharge. Call (928) 260-0864 and we’ll verify the protection on your HOA’s gate the same visit.
Why Bonita Springs Gates Fail Differently Here
The concentration of master-planned communities built between 1993 and 2008 means hundreds of automated gates in Bonita Springs hit peak failure age at the same time. Pelican Landing, Bonita Bay, and Spanish Wells installed their entry gates and operator systems during that building boom, and those 25-to-30-year-old systems now need control boards, hinge posts, and buried wiring replaced on the same schedule. Hurricane Ian accelerated what was already coming, flooding buried conduit and shearing posts across the community entries.
What sets Bonita Springs apart is what happened underground. After the storm, gates across the area looked structurally intact. The posts were straight, the operators powered up, the racks engaged. But the buried loop detector conduit under the asphalt apron had been crushed or flooded, and the wiring inside corroded. Operators tested fine on the bench. Gates still failed in the field. Communities that hired shops that swapped operators and left were back on the phone in a week. Communities that got their buried wiring rerun got their gates back for good. That’s the repair wave Naples and Fort Myers, on different surge paths, did not experience the same way.
We arrived at a Pelican Landing swing gate where the LiftMaster operator ran but the gate never opened. The hinge post was straight, the rack and pinion looked right above ground, and the operator was humming. Our crew pulled the loop detector and dug up the crushed conduit under the asphalt apron. After rerunning the buried wiring and re-sealing the post footing, the gate cycled reliably. The HOA manager told us two other shops had swapped the operator and left. That’s the difference between diagnosing the gate and fixing what actually broke.
Salt air does the rest of the work. Communities near Barefoot Beach and along the Imperial River see hinge hardware and post bases corrode from the inside out, where you can’t see the damage until the post snaps or the hinge tears out. We use stainless fixings and marine-grade coatings on coastal replacements, and we document the material shift in the written quote so there’s no debate later about what was installed.
If your Bonita Springs gate is drifting, dragging, or failing intermittently, call (928) 260-0864. A live person answers. We’ll schedule the visit, diagnose what actually failed, and put the price in writing before any work begins. Dispatch and scheduling are coordinated from our Miami-area office; crews serve Bonita Springs locally.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Bonita Springs and surrounding communities since 2014.