Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tempe
Most gate installations in Tempe fall between $1,800 and $6,400, depending on whether it’s a single swing gate on an existing post or a full slide-gate system with automation, conduit, and safety sensors. We install driveway gates, pedestrian gates, swing gates, slide gates, double gates, and security gates across Tempe, from the ASU corridor along Apache Boulevard to the HOA communities in the south. Since we dispatch from our Phoenix office with crews serving Tempe locally, a technician can typically reach most Tempe neighborhoods the same day you call. For a written price before any work starts, call (928) 260-0864.
Why Vance Gate Repair Is Tempe’s Preferred Gate Installation Company
Tempe presents a specific collision of gate problems we don’t see anywhere else in the East Valley. The ASU student-rental corridor along Rural Road and Apache Boulevard pushes gate operators through cycle counts that would take a normal suburban home five years to accumulate, and they do it in a single semester. Meanwhile, central Tempe’s 1960s-to-1980s ranch homes still carry original wrought-iron swing gates hung on concrete pillars that have shifted for decades. We know these streets, we know which operators hold up under haboob dust, and we know which HOA finish standards apply south of the US-60.
Every gate installation in Tempe gets a written scope and a flat price before our crew touches a tool. That’s Haven Standard Clause 1, and it’s non-negotiable for us. Our Tempe customers also receive a photographed record of the install, what was set, and what was left behind. When a future technician opens a Vance job record, they see the wiring diagram and the limit-switch positions. No guessing. No paying twice for the same discovery.
Led by Adrian Vance, who started in commercial access-control work in 2014, our team has installed and repaired over 22,000 gates. Every one of them got a written price first and a documented record at the end. Call (928) 260-0864 and a live person answers, 24/7.
Our Gate Installation Services in Tempe
Driveway Gate Installation
New driveway gate installs in Tempe run $2,200 to $6,400 for a standard single swing gate with automation, and slide gates for wider driveways often land between $3,800 and $7,800 depending on the track run and the motor. Tempe’s older central neighborhoods typically need new hinge posts or pillar reinforcement before the gate itself can hang, because the original 1970s concrete footings have shifted. South Tempe homes in master-planned communities near Fulton Ranch often need approval-ready finishes that match the HOA’s color and material standards, which we document and submit as part of the job.
Pedestrian Gate Installation
Pedestrian gates in Tempe run $650 to $1,900 for manual installs, and $1,800 to $3,600 with electronic access, a keypad, or a maglock. In neighborhoods backing up to SRP canals, a pedestrian gate often doubles as a utility access point for irrigation crews, and the easement language limits whether the gate can be locked or automated. We coordinate those requirements before any work begins, so you don’t get a violation notice after the gate is already in.
Sliding Gate Installation
Slide gates make sense for Tempe driveways that slope or where a swing gate would hit a vehicle. A new slide gate with a rack-and-pinion drive typically costs $4,200 to $8,500 in Tempe, including the track, motor, and safety photo-eyes. Haboob season is the main threat here: fine Sonoran dust from June through September works into the track channel and the limit-switch housing, which is why we spec sealed limit enclosures on every Tempe slide-gate install, not as an upgrade but as the default.
Swing Gate Installation
Swing gates remain the most common style in central Tempe, especially on the ranch homes built between the 1960s and 1980s. A full swing gate install with automation runs $2,400 to $5,800, and the wildcard is always the hinge post. If the post has shifted out of plumb, which is common on properties with Salt River Project canal-adjacent drainage, the gate will bind and the safety photocell alignment will drift within months. We check the post and the footing before we quote, so the written price includes any reinforcement up front.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tempe
We install and service nine major automation brands, including DoorKing, FAAC, Linear, LiftMaster, and Ghost Controls. That matters in Tempe because the ASU rental corridor has a mix of whatever operators builders put in, and a single complex near Rural Road might have a DoorKing on one gate and a builder-grade LiftMaster on the next. We don’t steer you toward replacing a motor that can be repaired, and we carry parts locally so Tempe customers aren’t waiting on a warehouse shipment. If you already have an Elite or Mighty Mule operator, our Gate Installation team can work on that too.
Common Gate Installation Problems We See in Tempe Homes
- Builder-grade operators burning out within one academic year. Near ASU, a rental gate can cycle more times in one semester than a typical suburban gate cycles in five years. A one-semester-old operator that already grinds needs a commercial-duty motor, not another residential unit.
- Manual gates converted to automation without a dedicated 120V conduit run. Builders throughout Tempe left only low-voltage irrigation wire in the ground. That wire is not code for a gate operator, and tying an automatic opener to it creates a fire and code risk.
- Eroded post footings on 1970s canal-adjacent properties. SRP ditch-water seepage weakens the concrete around hinge posts. A new automatic swing gate installed on that footing shifts within months and throws off the safety photo-eye alignment.
- Slide gates binding after every monsoon haboob. Dust fills the track channel and the limit-switch housing. The gate either stalls mid-travel or runs past its stop. Sealed enclosures and a track-clearing maintenance schedule fix this before the motor burns itself out.
Pricing for Gate Installation in Tempe, AZ
Here’s what Tempe homeowners and property managers can expect to pay in writing, before any work starts:
- Pedestrian gate, manual: $650 - $1,900
- Pedestrian gate with keypad or maglock: $1,800 - $3,600
- Single swing gate with automation: $2,400 - $5,800
- Double swing gate with automation: $4,800 - $8,900
- Slide gate with rack-and-pinion drive: $4,200 - $8,500
- Full security gate with access control: $5,500 - $12,000+
The price changes based on the gate length, the motor duty rating, the condition of the existing posts, and whether a new 120V conduit run from the panel is required. Every Tempe install includes a free on-site measure and a written quote, with the full price agreed before any tools come off the truck. Call (928) 260-0864 to schedule the measure.
We Also Serve Cities Near Tempe
Our crews cover the East Valley, so if your property is just outside the city line, we can still help. We serve Tempe neighbors in Mesa, Chandler, Gilbert, and Scottsdale with the same written-price standard and same documented install record. If you’re in any of those areas and need a gate installed or an operator retrofitted, call (928) 260-0864.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tempe
Because the builder installed a residential-duty operator on a gate that cycles like a commercial one. Near ASU, a pedestrian or vehicle gate on a multi-unit student rental can rack up several years’ worth of normal suburban cycles in a single semester. The motor overheats, the limit switches fatigue, and the gear train wears out. The fix is a retrofit to a commercial-duty motor like a FAAC 400 or DoorKing unit, with a sealed limit housing for haboob season. Call (928) 260-0864 and we’ll spec the correct motor for the actual cycle load, not the builder’s default.
Usually not. On a 1978-era Tempe property, the hinge post has had nearly five decades of soil movement, SRP seepage if you’re canal-adjacent, and summer heat expansion working on it. An automatic operator adds constant torque to a post that may already be out of plumb by an inch or more. We check the post and footing before quoting the operator, and if it needs reinforcement, that cost is in the written price before work starts, not discovered mid-job.
Yes. Properties that back up to Salt River Project irrigation canals, which cut through several Tempe neighborhoods, often have easement language that prevents a gate from being permanently locked or from blocking SRP access. An automatic operator that changes the gate’s operation can trigger an SRP review. We coordinate those access requirements before any install begins, so the gate works for you and stays compliant with the easement. Call (928) 260-0864 and tell us you’re canal-adjacent; we’ll handle the review process.
Because fine Sonoran Desert particulate from a haboob gets into the track channel and the limit-switch housing. The dust acts like sandpaper on the rack and pinion, and it packs into the switch contacts. South Tempe communities near the I-10 and US-60 interchange zones see more of this due to the urban heat-island effect that keeps dust suspended longer. We install sealed limit enclosures and schedule a post-haboob track-clearing on every slide gate we put in south of the 60.
Any new automatic gate in Tempe requires UL 325-compliant entrapment protection, which means at minimum a pair of photo-eyes, also called photoelectric sensors, mounted to detect a person or vehicle in the gate’s path. Depending on the gate type, force-sensing or contact edges may also be required. We install the full sensor array on every new operator, photograph the final alignment, and leave you the wiring record. Call (928) 260-0864 for a free measure and a written quote that includes all required safety equipment, not as an upcharge but as standard.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Tempe since our founding in 2014.