Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Round Rock
Gate installation in Round Rock usually runs between $2,800 and $9,500 for a complete driveway gate with operator, depending on material, width, and whether the existing posts can be reused. Most of what we install here is replacement work on 1990s and 2000s houses where the original builder gate is sagging, rusted through, or running on a control board that died years ago. We quote a flat written price before any work starts, and we know the neighborhoods, the HOA rules, and the soil conditions that make Round Rock gates fail differently than gates in Pflugerville or Hutto. Call (928) 260-0864 and a live person answers, 24 hours a day.
Why Vance Gate Repair Is Round Rock’s Preferred Gate Installation Company
We work on more existing gates in Round Rock than new construction, and that changes how we quote the job. A lot of companies want to sell you a whole new gate because it’s faster. We will tell you when the existing posts can be saved, when the operator is worth keeping, and when the honest answer is replacement. That matters in Round Rock because so many HOA-governed communities have deed restrictions on gate style and finish. Replacing a gate without knowing what the architectural review committee allows can create a costly redo. We walk that with you.
Adrian Vance started this company in 2014 out of commercial access-control work, and that background shows up in how we document every job. Before we leave your property, you get a written record of what was installed, the part numbers, and a photo log of the work. That documentation habit is the same one we use on community entry systems across Round Rock master-planned developments, where a future technician should never have to guess what’s behind the column cover.
Our dispatch comes from the Austin office, but crews are on the ground in Round Rock daily. We know the streets in Teravista, Forest Creek, and Paloma Lake. We know what a Williamson County spring does to a gate post, because we reset them every year.
Our Gate Installation Services in Round Rock
Every installation we quote in Round Rock includes the gate, the operator, the safety edges or photo-eyes, and the wiring run to the nearest weather-rated junction box. The written price covers all four. Here’s how the common gate types break down in this market.
Driveway Gate Installation
Driveway gates in Round Rock are typically ornamental iron or aluminum, and they sit on two posts that have been in Blackland Prairie clay for fifteen to thirty years. We measure the span, check the plumb on both posts with a laser, and tell you before we quote whether the posts need replacement or can be reused. A new double driveway gate with a LiftMaster or BFT operator usually runs $5,500 to $9,500, installed and wired, with the photo log and written record included.
Pedestrian Gate Installation
Most pedestrian gates we install in Round Rock are backyard and side-yard gates that were hung with builder-grade hinges during the 1995 to 2008 construction boom. Those hinges are at the end of their life, and the gate is often dragging on the concrete. A new steel-frame pedestrian gate with adjustable hinges and a proper latch runs $900 to $2,200 depending on size and whether we’re pouring a new post footing. The price is written before we cut anything.
Sliding Gate Installation
Sliding gates around Round Rock have a specific failure pattern we see constantly: the rack and pinion slips because the ground under the rail or wheels shifts with seasonal moisture. When we install a slide gate here, we set the rail on a deeper gravel base and confirm the rack alignment with a straightedge over the full travel, not just at the closed position. A new residential slide gate with motor, rack, and safety photo-eyes typically runs $6,000 to $11,000 in Round Rock.
Swing Gate Installation
Swing gate installation in Round Rock almost always involves addressing what the clay did to the hinge posts. We use a longer post than many builders did, set below the active soil zone where possible, and we check the operator’s limit switch travel after the gate has settled for a day or two. A single swing gate with a Linear or Ghost Controls arm operator runs $3,400 to $6,800. A double swing gate runs $5,000 to $8,500 depending on the post condition and the run to power.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Round Rock
We don’t steer you toward one brand. We work on what’s already there when it’s sound, and we install what fits the gate and the wiring. For Round Rock specifically, we keep BFT and LiftMaster boards on the truck because they show up in so many community entry columns across the city. We also install Linear, Viking, Ghost Controls, FAAC, Elite, and DoorKing operators. If you already have a brand you trust, we’ll quote that. If you don’t, we’ll explain why we’re recommending a particular board for your gate and your soil conditions.
Common Gate Installation Problems We See in Round Rock Homes
- Seasonal post heave from Williamson County clay. Every spring, post bases shift enough to throw swing gate arms out of travel. We see operators stall and limit switches burn out because the gate no longer reaches the stops the board thinks it’s reaching.
- Builder-grade hinges and latches from the 1995-2008 wave. The original hardware on backyard gates across Teravista, Forest Creek, and dozens of smaller subdivisions was cheap when it went in and is snapping now. Gates drag on the concrete, and that drag overloads any operator you attached to it.
- Pre-2010 control boards failing after freezes. Winter Storm Uri exposed how few residential operators in Round Rock had ever had their backup battery load-tested. A board that survived the freeze often failed weeks later, once corrosion in the solenoid wiring shorted.
- HOA style constraints colliding with replacement reality. If the community’s architectural guidelines specify a gate profile that is no longer manufactured, you need either a custom weld or an approved substitute. We walk you through that conversation before any money changes hands.
Pricing for Gate Installation in Round Rock, TX
Here are the working ranges we quote in Round Rock, in writing, before the job starts. Pedestrian gate replacement: $900 to $2,200. Single swing gate with operator: $3,400 to $6,800. Double swing gate with operator: $5,000 to $8,500. Sliding gate with rack and operator: $6,000 to $11,000. Driveway gate pair with operator and photo-eyes: $5,500 to $9,500. What moves the number is post condition, the distance to a power source, and whether the HOA requires a specific material or finish. We itemize the line items on the written price you receive before work begins. You will not approve a price you have not seen. Call (928) 260-0864 and we’ll schedule a free measure and written estimate.
We Also Serve Cities Near Round Rock
We run crews out to Pflugerville, Hutto, Georgetown, and Cedar Park on the same dispatch schedule. If you’re just outside the Round Rock city line, call us and we’ll confirm a service window. Our Gate Installation team handles every quote the same way, from Round Rock to the surrounding Williamson County communities.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Round Rock
Yes, usually, if the gate itself is square, the hinge posts are solid, and the weight is not dragging on the driveway. We retrofit existing Round Rock swing gates with current Linear, BFT, or Ghost Controls arm operators and keep the original ornamental iron. The gate is rarely the problem. The hinges, the posts, and the board are. Call (928) 260-0864 and we’ll tell you which one is failing before you spend anything.
The freeze itself usually does not kill the board. What kills it is the condensation cycle that follows, combined with a backup battery that has never been load-tested. After Uri, we found dozens of Round Rock operators with corrosion in the solenoid wiring that had been building for years. The freeze just pushed it over. If your gate died after a freeze, we’ll photograph the board condition and show you exactly what failed before quoting a replacement.
In most Round Rock HOAs, yes, if the replacement changes the material, finish, height, or style from the original. Communities like Teravista and Forest Creek have published gate guidelines that govern everything from the profile of the pickets to the powdercoat color. We read the community’s guidelines before quoting, and we will write the submittal documentation if you want us to. The price for the gate is fixed and written before any of that starts.
Because the rail or wheel base shifts with seasonal soil moisture and the rack moves relative to the pinion. Round Rock’s Blackland Prairie clay expands and contracts enough to move a slide gate rail a quarter inch per season, and once the rack is out of line, the pinion walks off under load. We set slide gate rails on a deeper gravel base and check the rack over the full travel with a straightedge. Call us if your gate is grinding. That’s a fixable alignment issue, not a normal thing to live with.
Replace the hinges and the posts, not the whole gate. The cheapest fix that lasts in Round Rock is resetting the hinge posts below the active soil zone and hanging the existing gate leaves on new adjustable hinges. That runs substantially less than a full replacement, and it solves the actual problem, which is post movement in the clay, not the gate itself. Get a written price before you decide.
If your gate is sagging, grinding, or dead at the board, call (928) 260-0864. A live person answers. We’ll schedule a measure, hand you a written price, and leave you a documented record of what was installed and why.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Round Rock and Williamson County since 2014.