Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Round Rock, TX
Gate motor and opener failure is the most common call we handle in Round Rock, and it usually traces back to two things: the city’s 1990s-2010s housing boom that put thousands of builder-grade operators into HOA communities at the same time, and Central Texas heat that bakes control boards and plastic housings years before the manuals say they should fail. If your gate won’t open, grinds when it moves, or stops halfway, call us at (928) 260-0864 and we’ll give you a written price before any work starts.
Why Round Rock Homes Are Different
Round Rock’s growth pattern created a specific repair environment. Between the mid-1990s and late 2000s, developers built Teravista, Forest Creek, Paloma Lake, and dozens of smaller master-planned subdivisions in a narrow window, which means automated entry gates and backyard driveway gates across the city were installed with the same generation of hardware and are now hitting end-of-life at the same time. We see the same LiftMaster and Elite control boards failing in community entry columns across unrelated neighborhoods because the same vendor pools supplied them.
Soil is the second factor. Williamson County’s Blackland Prairie clay expands and contracts with seasonal moisture, heaving gate posts out of alignment and throwing swing gates off their latch points, something cities on limestone shelf don’t experience at the same scale. Add Central Texas UV that accelerates rust on ornamental iron and degrades plastic operator housings, plus the freeze failures that followed Winter Storm Uri when backup batteries failed after years without testing, and you have a repair environment unlike anywhere else in the metro.
HOA deed restrictions add another layer. Most Round Rock communities govern gate materials, finish colors, and style, and some changes to a gate panel or operator require architectural review committee approval before work can proceed.
Our Main Round Rock Services
Most Round Rock homeowners call us for one of two services: repairing an existing gate that’s stopped working correctly, or installing a new gate that meets HOA guidelines and is built to handle Blackland Prairie clay soil.
Gate Repair in Round Rock
When a gate sags, binds, or stops responding to an opener, we find the cause and fix it without steering you toward replacement. Most Round Rock repairs involve post alignment from clay soil heave, hinge or latch wear on 1990s-era builder hardware, or opener troubleshooting. For full details on what we repair and what it costs, see Gate Repair in Round Rock.
Gate Installation in Round Rock
New gate installation in Round Rock often runs through an HOA approval process before we order materials, and we’re familiar with the ornamental iron and aluminum styles most local deed restrictions require. Every installation includes a written scope, a written price, and a documented record of the completed work. For the full breakdown, see Gate Installation in Round Rock.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Round Rock
Gate motor and opener work in Round Rock is dominated by operator failures in that 1995-2010 construction window: control boards that overheat, plastic gear assemblies that strip in summer heat, and solenoids that fail after a hard freeze. Most jobs are repair-first, because the operator on the property still has life in it and a replacement isn’t warranted. We service nine major gate-automation brands, including BFT, Linear, and Viking, so we work on whatever motor is already on the gate rather than pushing a replacement. To understand the full scope of what we handle, see Gate Motor & Opener.
Motor Installation
Signs you need it
The operator hums but won’t move the gate, has no power at all despite a good circuit, or the existing motor is over 15 years old and replacement parts are no longer manufactured.
What it costs in Round Rock
Swing-gate motor installation in Round Rock typically runs $650-$1,200, while slide-gate motor installation runs $850-$1,500 depending on the brand and whether the arm bracket is intact.
How we do it
We remove the old operator, install the new motor on its mounting plate, set limit switches and travel stops, then test the gate through full open and close cycles with the safety edges and photo-eyes connected.
Motor Repair
Signs you need it
The gate opens but won’t close, moves in jerks, or the motor runs but the gate doesn’t move because the gear assembly has stripped.
What it costs in Round Rock
Motor repair in Round Rock ranges from $185-$450, with control board replacement running $300-$600 and limit switch adjustment from $120-$200.
How we do it
We diagnose the failure point, photograph what we find, replace or adjust only what’s failed, then set and test the limits and safety systems with a written record of every part and setting.
Linear Motor
Signs you need it
A Linear arm operator won’t extend or retract, or it stops mid-travel and beeps, which usually means a bad internal limit switch or a stripped drive gear.
What it costs in Round Rock
Linear motor repair in Round Rock typically runs $220-$480, and full Linear arm replacement runs $500-$1,000 depending on arm length and model.
How we do it
We open the arm housing, inspect the drive gear and limit switch assembly, replace the failed component, then reset travel and photograph the new limit positions for your record.
Slide Motor
Signs you need it
A slide gate stalls halfway, grinds against the rail, or the motor runs but the gate won’t move because the chain or belt has slipped off the sprocket.
What it costs in Round Rock
Slide motor replacement in Round Rock runs $850-$1,500, while slide-gate motor repair in Round Rock runs $200-$450 for chain adjustments, sprocket alignment, or limit switch replacement.
How we do it
We check the chain tension, sprocket alignment, and motor mount, repair or replace what’s failed, then run the gate through full travel with the safety edges and photo-eyes tested and photographed.
Intercom Integration
Signs you need it
The intercom at the entry column no longer triggers the gate, or visitors report one-way audio or no ring at the house.
What it costs in Round Rock
Intercom-to-operator integration on a Round Rock gate typically runs $350-$750, depending on whether the wiring between the column and the operator is intact or needs replacement.
How we do it
We trace the dry-contact relay from the intercom to the operator board, test voltage at both ends, replace the relay or wire if needed, then verify the gate opens and closes from the intercom button.
What Gate Motor & Opener Costs in Round Rock
| Item | Typical range in Round Rock |
|---|---|
| Limit switch adjustment | $120-$200 |
| Control board replacement | $300-$600 |
| Swing-gate motor installation | $650-$1,200 |
| Slide-gate motor installation | $850-$1,500 |
How long does a gate opener last in Round Rock?
On average, 10-15 years in our climate. Central Texas UV breaks down plastic housings and wiring insulation faster than manufacturer ratings assume, so an operator rated for 15 years may fail at 11 or 12 in Round Rock heat. Call (928) 260-0864 for a written diagnosis and price.
Can you repair my gate opener the same day I call?
In most cases, yes. We dispatch from the Austin office to Round Rock, and common failures like limit switches, stripped gears, and fried control boards are in our truck stock. The written price comes before any work begins.
Gate Access Control in Round Rock
Gate access control in Round Rock means keypads, remotes, phone-entry systems, card readers, and video intercoms that let people in while keeping everyone else out. Most access-control failures we see in Round Rock trace to the same root cause: builder-installed keypads and entry hardware from the 1995-2010 construction wave that’s now failing and no longer supported by its original manufacturer. We replace or integrate whatever the property has, including Ghost Controls and Viking components, and we leave wiring diagrams so no future technician has to guess. For the complete breakdown, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad won’t accept codes, lights up but doesn’t trigger the gate, or the membrane buttons are cracked and unresponsive from UV exposure.
What it costs in Round Rock
Keypad installation or replacement on a Round Rock gate typically runs $250-$650 depending on whether the existing wiring can be reused.
How we do it
We remove the old keypad, install the new unit on a fresh weather seal, wire the relay to the operator board, then program the codes and photograph the wiring at both ends.
Remote Control
Signs you need it
A remote that worked for years now only opens the gate from close range, or it’s lost its programming after a power surge or battery replacement.
What it costs in Round Rock
Remote control programming or replacement on a Round Rock gate runs $75-$250 including the visit, the device, and verification.
How we do it
We identify the operator’s receiver frequency and protocol, program the new or existing remote at the board, and test it from the street distance you actually use.
Phone Entry
Signs you need it
Visitors call the entry line but hear no ring at the house, or the gate won’t open when the house phone picks up and the access code is entered.
What it costs in Round Rock
Phone-entry system installation or reprogramming on a Round Rock gate usually runs $400-$800 depending on whether the SIM card, relay, or wiring is the failure point.
How we do it
We test the cellular or landline connection, trace the relay circuit, replace or reprogram the failed component, then call the system from our own phone to verify it opens the gate.
Card Reader
Signs you need it
Resident access cards work intermittently, or the reader beeps but doesn’t release the gate because the relay output is dead.
What it costs in Round Rock
Card reader replacement or retrofit on a Round Rock entry gate typically runs $500-$950, including hardware and relay integration.
How we do it
We install the new reader at the entry point, run or reuse the wiring to the operator, configure the relay output, then test with a new card and document the wiring path.
Video Intercom
Signs you need it
The video feed is black, the audio is one-way, or the indoor monitor no longer powers up while the outdoor unit appears fine.
What it costs in Round Rock
Video intercom installation or replacement on a Round Rock gate runs $600-$1,200 depending on whether the cable between the gate and the house needs replacement.
How we do it
We check the video and audio pairs at both ends, replace the failed monitor or outdoor unit, run new cable if the old jacket has degraded, and verify two-way communication from the gate to the house.
What Gate Access Control Costs in Round Rock
| Item | Typical range in Round Rock |
|---|---|
| Remote programming or replacement | $75-$250 |
| Keypad installation or replacement | $250-$650 |
| Phone-entry system installation | $400-$800 |
| Video intercom installation | $600-$1,200 |
Can you add a keypad to my existing Round Rock gate opener?
In most cases, yes. We match the keypad to your operator’s relay input, run or reuse the wiring, and program the codes. The price is written and handed to you before work starts.
Will my HOA need to approve an access control change?
Many Round Rock HOAs require architectural review for visible changes to entry gates, including keypads and intercoms. We’re familiar with the common local deed restrictions and can tell you what typically triggers review before we order parts.
Gate Parts & Welding in Round Rock
Gate parts and welding in Round Rock runs heavily toward one job: repositioning and reinforcing posts that Blackland Prairie clay has heaved out of alignment, then replacing the hinges and latches bent by that movement. The second most-common job is crack and break repair on ornamental iron gates from the 1990s and 2000s, where Central Texas UV has eaten through the paint and rust has done the rest. We’ll fabricate or replace whatever’s needed and document every piece with photos and part numbers. For the full service breakdown, see Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate drags on the ground, binds at the latch, or the hinge pin has worn an oval into the barrel so the gate swings loose when it should stay put.
What it costs in Round Rock
Hinge replacement on a Round Rock gate typically runs $150-$450 per hinge depending on whether the post has shifted and needs shimming or reinforcement.
How we do it
We cut off the old hinge, grind the surface clean, weld or bolt the new hinge at the correct height, then test the gate’s swing and photograph the finished weld.
Post Replacement
Signs you need it
The post is visibly leaning, the gate no longer latches because the post has moved, or the post bottom has rusted through at the soil line.
What it costs in Round Rock
Post replacement in Round Rock runs $400-$1,200 per post, including concrete, excavation, and resetting the post plumb for the local clay soil’s movement pattern.
How we do it
We cut the concrete around the old post, pull it, set a new post with a deeper footing and proper drainage, then rehang the gate and photograph the finished work.
Rail Repair
Signs you need it
A bottom rail has rusted through, a top rail has cracked at a picket weld, or the gate has dropped because the rail has bent under its own weight.
What it costs in Round Rock
Rail repair or reinforcement on a Round Rock gate typically runs $200-$600 depending on the length of the rail and whether we weld a new section in or replace the full rail.
How we do it
We cut out the failed section, fit and weld a replacement rail, grind the weld smooth, and prime and paint the repair to match the existing gate finish.
Custom Welding
Signs you need it
A picket has snapped at the weld, a decorative scroll has cracked off, or the gate frame has separated at a corner joint.
What it costs in Round Rock
Custom welding on a Round Rock gate runs $150-$400 per repair point, with most jobs completed in one visit since we carry mobile welding equipment.
How we do it
We clean the break to bare metal, weld the joint, grind and finish it, then prime and paint to match the surrounding gate so the repair doesn’t stand out.
Gate Rollers
Signs you need it
A slide gate scrapes, wobbles, or stops because a roller wheel has seized or worn flat on one side.
What it costs in Round Rock
Gate roller replacement on a Round Rock slide gate runs $150-$350 per roller, including removal, installation, and rail alignment check.
How we do it
We lift the gate off the worn roller, install the new wheel on its bearing, set the height so the gate rides level, and test the full travel before we leave.
What Gate Parts & Welding Costs in Round Rock
| Item | Typical range in Round Rock |
|---|---|
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $400-$1,200 per post |
| Rail repair or reinforcement | $200-$600 |
| Gate roller replacement | $150-$350 per roller |
Can you weld an ornamental iron gate in Round Rock without removing it?
In most cases, yes. We carry mobile welding equipment, so cracks and broken pickets on your property get welded on site. The gate stays hung unless it needs major frame repair.
How much does it cost to fix a sagging gate in Round Rock?
Most sagging-gate repairs run $200-$600 depending on whether the fix is a new hinge, a welded frame corner, or a post reset. We photograph the broken point and hand you a written price before the welder starts.
Brands We Service in Round Rock
We service BFT, Linear, Viking, and Ghost Controls operators among the nine major automation brands we work on across Round Rock. We stock common control boards and replacement parts for the brands most frequently installed in local HOA communities, which keeps most repairs to a single visit rather than a parts order. Learn more about our brands.
Pricing for Gate Repair in Round Rock, TX
| Service | Typical range in Round Rock |
|---|---|
| Limit switch adjustment | $120-$200 |
| Motor repair | $185-$450 |
| Control board replacement | $300-$600 |
| Swing-gate motor installation | $650-$1,200 |
| Slide-gate motor installation | $850-$1,500 |
| Keypad installation or replacement | $250-$650 |
| Phone-entry system installation | $400-$800 |
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $400-$1,200 per post |
| Gate roller replacement | $150-$350 per roller |
What pushes a Round Rock gate repair higher: clay soil that’s moved a post enough to require a reset, HOA-required finishes or materials that cost more than stock, and 1990s-era gates where multiple components failed at once because the whole assembly is the same age. Whatever the price is, you get it in writing before any work starts, and it never changes at the end of the job.
Neighborhoods We Serve in Round Rock
We run gate repair and service throughout Round Rock, and most dispatch calls reach a technician the same day for motor, opener, and access control failures. These are some of the neighborhoods we regularly work in:
- Teravista
- Forest Creek
- Paloma Lake
- Behrens Ranch
- Brushy Creek
Service Area - Cities Near Round Rock
Our gate repair service area extends beyond Round Rock to cover the surrounding Williamson County and northeast metro communities. We also serve Pflugerville, TX, Hutto, TX, Georgetown, TX, and Cedar Park, TX, with dispatch coordinated from our Austin office.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Round Rock
Most straightforward gate repairs do not require a city permit, but if your Round Rock HOA governs gate materials or styles, a visible change like a new panel or a different operator may require architectural review committee approval before work begins. We’re familiar with common local deed restrictions and will tell you what we see.
For motor, opener, keypad, or access control failures, we usually reach Round Rock homes the same day you call. Dispatch comes from our Austin office, and our trucks are stocked with the most common boards and parts for local operators. Call (928) 260-0864 and a live person answers.
Yes, every time. That’s Clause 1 of our Haven Standard. The flat price is written and given to you before any work starts, and you get a photographed record of what we found, adjusted, or replaced before we leave your Round Rock property.
If your gate motor is dead, your keypad won’t respond, or your gate post has leaned out of plumb, call Vance Gate Repair at (928) 260-0864 for a free estimate and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Round Rock Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.