Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plantation
Gate installation in Plantation usually runs $1,850-$6,400 for a full driveway system, depending on whether it’s a swing or slide, single or double leaf, and what’s already underground at the property line. Most installations in Plantation take one to two days once equipment is on hand and the Broward County permit is pulled. We dispatch crews to Plantation daily from our South Florida office, and a live person answers when you call (928) 260-0864, any hour.
This page is built for Plantation’s aging HOA gate infrastructure. The communities here share a construction era, which means their gate operators are failing on the same schedule. If you’re replacing a 1980s Linear at a community entrance off Broward Boulevard, or adding automation to a manual gate on a canal-side lot near the New River, we already know what’s in the ground before the first cut.
Why Vance Gate Repair Is Plantation’s Preferred Gate Installation Company
Vance Gate Repair is led by Adrian Vance, who started in commercial access-control work in 2014 and brought that documentation habit to residential gates. Every Plantation job gets a written price before any tool comes off the truck, and a photo record of what was found, what was set, and what was installed before we leave. That’s The Haven Standard, and it applies whether we’re hanging a new pedestrian gate in Plantation Acres or replacing a failed operator at a Jacaranda Lakes entry.
We’ve repaired and installed more than 22,000 gates since 2014, and Plantation’s planned-era communities show up in our job files constantly. The pattern here is specific: whole HOA neighborhoods built between 1975 and 1995 are losing their original operators within months of each other. A company that only does one-off repairs in Fort Lauderdale won’t see that clustering. We do, and we stock for it.
Technicians dispatched to Plantation are background-checked, uniformed, and sent with a name and photo before arrival. The price is written and handed over before work starts. No verbal estimate, no surprise invoice at the end, no callback queue.
Our Gate Installation Services in Plantation
We handle the full range of Gate Installation work across Plantation, from single pedestrian gates to double-leaf security entrances. Here’s what that looks like in this city specifically.
Driveway Gate
Driveway gate installation in Plantation typically runs $2,200-$5,800, with the spread driven mostly by gate material, operator choice, and whether conduit already exists at the driveway edge. Many Plantation homes on canal-front lots off Old Hiatus Road or Peters Road have short setbacks, which means the gate often needs to slide rather than swing, so the operator and track choice matters more than the leaf itself.
Pedestrian Gate
Pedestrian gate installation in Plantation runs $850-$2,400, including the post, leaf, latch, and optional maglock or keypad. In HOA communities around Central Park or Plantation Middle School, these gates get heavy daily use and the hardware has to stand up to humidity and salt air. We spec stainless or powder-coated hinges from the start, not the zinc hardware that fails in two summers.
Sliding Gate
Sliding gate installation in Plantation runs $2,800-$6,400, and it’s the most common choice on corner lots and short-driveway properties where a swing leaf would arc into the street. The site work is the real cost driver here: a concrete or asphalt track, a V-wheel or cantilever carriage, and a poured operator pad. In Plantation’s wet season, we install sealed junction boxes on every underground splice because the canal grid keeps the water table just inches below grade.
Swing Gate
Swing gate installation in Plantation runs $1,850-$5,200 for a single leaf and $3,400-$6,400 for a double leaf. On masonry-wall communities built in the 1980s, the original hinge posts are usually steel set in concrete, and a straight replacement is faster than a new build. But any swing gate installation in Plantation needs to comply with Broward County’s post-Hurricane Andrew wind-load requirements, and we handle that permit work as part of the job rather than leaving it to the HOA.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Plantation
We work on the operator that’s already on the property rather than steering you toward a replacement for the sake of a sale. In Plantation, that means a lot of older Linear and Eagle units, plus newer BFT, Viking, and Ghost Controls installations. We stock swap-out boards for discontinued Linear and Eagle control boards because so many Plantation HOA entries still run on them, and when a board can’t be sourced we quote a full operator replacement with a written side-by-side scope so the HOA board sees exactly what they’re approving before they approve it.
Common Gate Installation Problems We See in Plantation Homes
- Flooded conduit runs. Underground conduit for loop detectors and low-voltage wiring runs just above the water table in Plantation, and during the May-October wet season those runs flood routinely. The result is recurring control board and detector failures that a surface-level repair won’t fix.
- Builder-grade operators aging out together. The 1980s Linear and Eagle units installed across whole Plantation subdivisions are failing within months of each other, which means HOA boards suddenly have three or four entries down at once and no contractor who can handle the volume.
- Wind-load permitting gaps. Post-Hurricane Andrew code changes apply to residential swing-gate replacements in Broward County, and out-of-area installers routinely miss the requirement. The permit gets flagged, the HOA gets fined, and the gate sits uninstalled.
- No conduit for automation. Builders in the 1980s often hung a manual gate and never ran power or loop conduit to the driveway. Adding automation to those gates means a fresh saw-cut across concrete or asphalt, and we price that line item explicitly instead of burying it in the labor figure.
Pricing for Gate Installation in Plantation, FL
Here are honest ranges for Plantation’s market.
- Pedestrian gate installation: $850-$2,400
- Single swing gate with operator: $1,850-$5,200
- Double swing gate with operator: $3,400-$6,400
- Sliding gate with operator: $2,800-$6,400
- Adding automation to an existing manual gate: $1,400-$3,200, plus conduit work if none exists
- Legacy operator replacement (Linear or Eagle): $1,100-$2,800, depending on board availability
What moves the price is the saw-cut work, the operator brand, and whether we’re pulling new conduit. Every quote is written, handed over before work starts, and agreed to before anyone picks up a tool. Call (928) 260-0864 for a free estimate on any of this.
Gate Installation in Older Plantation HOAs: What We Actually See
We replaced a failed Linear slide gate operator at the Jacaranda Lakes community entrance with a LiftMaster CSL24V. While pulling new conduit for the loop detector, we discovered the original 1980s run had flooded repeatedly and shorted the control board. Our crew installed sealed junction boxes and a new saw-cut loop, then retuned the gate to Broward County wind-load code so the HOA passed inspection first try. That job is a good summary of what Plantation gate work actually looks like: the visible failure is just the top layer.
The planned-era uniformity of Plantation’s housing stock means gate hardware ages out across entire communities around the same time. Hinges, operators, control boards, loop detectors: they all hit end of life in the same five-year window. That’s why we see clustered full-operator replacements rather than one-off repairs here, and why we keep legacy swap-out boards on the truck for Plantation jobs specifically.
We Also Serve Cities Near Plantation
Our crews cover Plantation daily and also serve Gate Installation in Plantation neighbors in Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. If your community sits on the edge of two service areas, call and we’ll confirm coverage without sending you through a phone tree.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plantation
Yes. Broward County’s post-Hurricane Andrew wind-load requirements apply to residential swing-gate replacements, and the permit has to show the gate is engineered for the correct wind zone. We handle the permit as part of the installation rather than leaving it to the HOA or the homeowner. Call (928) 260-0864 and we’ll tell you what applies to your specific community.
We repair Eagle operators when the failure is mechanical: a limit switch, a capacitor, a relay. When the control board is dead and the board is discontinued, repair stops being cost-effective and we quote a full operator replacement with a written side-by-side scope so the HOA board can vote on it with real numbers. We stock some legacy Eagle boards, so call (928) 260-0864 first. There’s no charge to have a technician look.
Because Plantation’s canal grid keeps the water table just inches below grade, and most 1980s-era conduit runs were not sealed against that level of groundwater. The conduit floods, the low-voltage wiring shorts, and the operator or loop detector fails. A replacement operator will fail the same way unless the underground run is fixed at the same time. We include that in every Plantation scope.
Yes, but it almost always involves a new saw-cut for power and loop detector conduit, because builders in the 1980s rarely ran conduit for a gate that was hung manual. The automation kit itself runs $1,400-$3,200, and the conduit work is priced as a separate line item so you see exactly what you’re paying for. Call (928) 260-0864 and we’ll give you a written figure.
We install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Plantation’s older HOA entries we often recommend LiftMaster or BFT for slide gates and FAAC or Ghost Controls for swing gates, but the right choice depends on the gate weight, the leaf count, and what’s already in the ground. We’ll give you a written recommendation with the price on it.
Call for a Free Gate Installation Estimate in Plantation
If you’re in Plantation and your gate operator failed, your HOA is facing a cluster of aging entries, or you want automation added to a manual gate, call (928) 260-0864. A live person answers, 24 hours a day. We’ll dispatch a technician to Plantation, give you a written price before any work starts, and leave you with a photo record of everything we did. Free estimates, no callback queue, no verbal-only pricing.
Written by Adrian Vance, Owner at Vance Gate Repair, operating across Plantation since 2014.