Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Peachtree Corners
Most gate installations in Peachtree Corners fall between $2,800 and $9,500, driven by the gate length, the material, whether we’re automating it, and what the existing posts and footings look like. We serve every subdivision off Peachtree Parkway, Holcomb Bridge Road, and Jimmy Carter Boulevard, from the older planned communities near the Chattahoochee River up through the neighborhoods around Technology Park. We’re a 24/7 phone-answered company: you call (928) 260-0864 and a live person picks up, no prompts, no callback queue. We quote in writing before any work begins, and we leave you a documented photo record of what we found, what we set, and what we installed.
Why Vance Gate Repair Is Peachtree Corners’s Preferred Gate Installation Company
Adrian Vance founded this company in 2014 on a habit carried over from commercial access-control work: write down what you found, write down what you set, and leave the customer a record. That’s now The Haven Standard, and every gate project we complete in Peachtree Corners, whether a new driveway swing gate off Spalding Drive or a commercial slide gate near Peachtree Corners Circle, runs through the same documentation discipline. We hand you the written price before anyone picks up a tool, and we photograph every adjustment, reading, and installed part before we leave. Under Clause 4 of the Haven Standard, that photo log is yours at no additional charge.
We know the subdivisions here. The brick colonials with masonry gate columns off Medlock Bridge Road, the double-driveway entries in the 1970s-era neighborhoods, the HOA rules that say what finish your replacement gate can wear. Our technicians are background-checked and uniformed, dispatched with their name and photo sent to you before arrival. We service nine automation brands, which means we work on the motor already on your property rather than steering you toward a replacement you didn’t ask for.
Most importantly: we have seen what 40 years of Georgia humidity and red clay do to gate hardware in Peachtree Corners, and we price for what we actually find, not what the brochure says. Our 365-Day Done Right Promise covers every completed installation. If the work isn’t right, we make it right, no argument, no fee.
Our Gate Installation Services in Peachtree Corners
Driveway Gate Installation
Driveway gate installation in Peachtree Corners almost always means either replacing a gate that’s been on the property since the Carter administration or building from scratch at a home that never had one. Most of our customers along Spalding Drive and Jones Bridge Road want ornamental steel or aluminum that matches the existing brick and ironwork. We handle the full scope: removing the old gate, evaluating the posts to see if they’re worth keeping, setting new footings where needed, hanging the gate, and installing the operator with UL 325-compliant safety photocells. A single driveway swing gate installation typically runs $3,200 to $7,800 in this area.
Pedestrian Gate Installation
Pedestrian gates in Peachtree Corners neighborhoods tend to live on the side of the house or off the back patio, often integrated with a driveway gate in a larger entry system. The failure mode we see most often here is the latch or self-closing hinge, not the gate itself. A new pedestrian gate with modern hardware and a matching finish generally runs $1,100 to $3,400, depending on the width and whether we need to set new posts. We match the finish to your HOA’s approved standard, which in most Peachtree Corners communities means a specific powder coat or paint specification.
Sliding Gate Installation
Sliding gates are common on the larger lots in Peachtree Corners, particularly properties with a side or rear entry that runs parallel to the house. A sliding gate track demands careful grading, because Georgia red clay swells and shrinks enough to throw a slide track out of level within a season or two if the base isn’t compacted properly. We excavate, set a compacted base, and install the track and gate as one continuous job. Sliding gate installation in Peachtree Corners, including the operator and safety edges, typically lands between $4,500 and $11,000. The wider the opening, the heavier the gate, the more steel in the frame.
Swing Gate Installation
Swing gate installation in Peachtree Corners usually means a double gate on masonry columns, the classic look in the HOA-governed subdivisions developed between the late 1970s and mid-1990s. Those columns are often the problem: Georgia clay shifts them out of plumb, and the hinges bind or the gate drags. If the posts are sound, we can hang a new gate and operator on them. If they’ve moved beyond adjustment, we set new footings and rebuild before the gate goes on. A double swing gate installation with automation here runs $5,000 to $9,500 for a typical driveway opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Peachtree Corners
We install and service DoorKing, Viking, Ghost Controls, and Elite operators, along with five other major automation brands. That matters in Peachtree Corners because a lot of the equipment still running here was installed decades ago under different brands, and many of those original boards are no longer manufactured. Rather than telling you to replace a perfectly good gate because the operator brand is orphaned, we can often retrofit a modern UL 325-compliant DoorKing or Viking operator to the existing gate and posts. We stock common control boards, photocells, and limit switches locally, which means less waiting on a parts shipment for a Peachtree Corners job.
Common Gate Installation Problems We See in Peachtree Corners Homes
- Root heave lifting gate posts from below. The 40-to-50-year-old loblolly pine and white oak root systems throughout older Peachtree Corners subdivisions push concrete gate post footings upward, creating a forward tilt that no hinge adjustment can correct. You can’t see the root from the surface; you see the gate leaning, and then the motor starts binding.
- Red clay swelling and shrinking. Peachtree Corners sits on Georgia red clay, which expands dramatically when wet and contracts when dry. Over a single wet-dry cycle, masonry gate posts can move far enough out of plumb to strip motor gears, fault the photocells, and tear the rack and pinion off alignment.
- Obsolete control boards from the 1980s and 1990s. Original Linear and FAAC control boards are dying of capacitor rot from decades of subtropical humidity, and parts are no longer available. HOAs across Peachtree Corners are now facing the decision: retrofit a modern board and motors onto the old gate, or replace the whole system.
- HOA finish and style covenants. Most Peachtree Corners subdivisions have an architectural review process that dictates approved gate materials, colors, and hardware. We coordinate with community managers before work begins so the finished gate doesn’t trigger a violation letter.
What Does Gate Installation Cost in Peachtree Corners, GA?
Here are the ranges we quote most often in Peachtree Corners:
| Project | Typical Range in Peachtree Corners |
|---|---|
| Single swing driveway gate with operator | $3,200 - $7,800 |
| Double swing gate installation with automation | $5,000 - $9,500 |
| Sliding gate with track, operator, and safety edges | $4,500 - $11,000 |
| Pedestrian gate with new posts and hardware | $1,100 - $3,400 |
| New post footings (each, where root heave or clay shift demands rebuild) | $450 - $1,200 |
The range tightens once we see the site. Gate length and material drive the most cost. Whether the existing posts are reusable or need new footings below the frost line drives the rest. In Peachtree Corners specifically, root heave and red clay shift mean we quote post work more often than in younger neighboring cities. You get the written price before we begin, and that price is the price, no surprise invoice at the end (Haven Standard Clause 1). Estimates are free at (928) 260-0864.
We Also Serve the Communities Around Peachtree Corners
Our Gate Installation team covers Peachtree Corners and the surrounding metro as well: Atlanta, Sandy Springs, Roswell, and Johns Creek. If you’re on the border or in an adjacent zip code, call us and we’ll tell you straight whether we can dispatch to your property. Dispatch and scheduling for Peachtree Corners jobs are coordinated from our Atlanta office, with crews serving the city locally.
Serving Peachtree Corners, GA - Our Local Coverage Area
We’re based in the Peachtree Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Peachtree Corners
In most cases we can retrofit. If the gate itself is structurally sound, we replace the old control board and the safety devices with a modern UL 325-compliant operator, often a DoorKing or Viking unit, wired to your existing gate and hinges. Full replacement is only called for when the gate has corroded through at the post junction or the posts themselves have shifted beyond adjustment. We’ll show you both paths with written prices before you decide. Call (928) 260-0864 for a free site assessment.
Almost always the clay. Georgia red clay swells when it’s saturated, and that swelling lifts the track or the gate post just enough to throw the operator out of alignment, triggering the safety fault. Sometimes it’s water getting into the limit switch or the photocell housing. We diagnose it on site, photograph what we find, and fix the cause rather than clearing the fault and hoping it doesn’t come back. Most rain-related faults are repairable in one visit.
Yes. We’ve matched the flat black and antique bronze powder coats common across Peachtree Corners subdivisions, and we coordinate with the community manager or architectural review board before ordering materials. You get a sample or a color match spec sheet to submit to the HOA. If the original was custom, we photograph and document it so the replacement reads as the same gate, not a substitute.
It depends what’s underneath. If the post is tilting because the original footing was undersized or cracked, we can excavate, reset the post, and pour a new footing with rebar. If a tree root is lifting the footing from below, we cut back the offending root and set a deeper footing. Photographs from the excavation tell us which fix you need, and we show you those photos before we quote. In some cases the post itself is too corroded at the buried junction and replacement is the only sound option.
Yes, and we’ve done it on several larger Peachtree Corners properties where running line voltage was impractical. Solar openers from Ghost Controls and Viking work well here, though the panel placement matters more in Peachtree Corners than it would in a wide-open site, because the mature pine and oak canopy shades much of the lot. We’ll site the panel where it catches enough sun, and we’ll document the installation the same way we document every job. Call (928) 260-0864 for a free estimate.
Call for a Free Gate Installation Estimate in Peachtree Corners
If you’ve got an old gate leaning on tired posts, or a slide gate that faults after every rain, or an HOA notice about your entry, we’ll come see it. You’ll get a written price before any work starts, a photo record when we leave, and a 365-Day Done Right Promise on everything we install. A live person answers at (928) 260-0864, 24 hours a day, seven days a week. Call us, and we’ll walk the site with you.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Peachtree Corners since 2014.
Gate Installation in Nearby Areas
