Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sandy Springs
Most gate installation work in Sandy Springs starts with a question we can answer over the phone: is the existing post still sound, or will the new gate pull it out of plumb inside a year? We work on the estate driveways along Mount Paran Road, through the HOA communities off Riverside Drive, and across the neighborhoods east of Roswell Road. If you’re looking at a cracked pilaster, an obsolete operator, or a gate that was hung decades before modern safety sensors existed, call us at (928) 260-0864. We’ll send a technician who knows Sandy Springs’s older housing stock, and you’ll get a written price before any work starts.
Why Vance Gate Repair Is Sandy Springs’s Preferred Gate Installation Company
Sandy Springs has more gated estate driveways per mile than almost anywhere else in metro Atlanta. That’s not marketing talk. It’s what we see on routing sheets. The 1970s through 1990s development along Mount Paran and Riverside left behind hundreds of custom iron and aluminum gates hung on masonry pilasters, and a lot of them are now hitting the same failure points at the same time. Cracked mortar, hinge posts out of plumb, control boards that died after one too many Georgia power surges. Our technicians have walked dozens of these properties. They know what a Sandy Springs HOA architectural review board will ask before a gate swap gets approved, and they write the documentation to pass it the first time.
We put the price in writing before work begins, and we leave a photo record of everything we touched. That’s not a courtesy. It’s Clause 1 and Clause 4 of the Haven Standard, the operating rules Adrian Vance set when he started this company in 2014 after years of commercial access-control work. If the job is not right, the 365-Day Done Right Promise means we return and make it right at no charge. A live person answers the phone at (928) 260-0864 around the clock, no automated attendant.
Our Gate Installation Services in Sandy Springs
Driveway Gate Installation
Driveway gates in Sandy Springs are almost always custom, because the driveways were custom-built to begin with. A 14-foot opening between two brick pilasters on a Mount Paran estate is not a standard size. We measure, spec the gate to the actual opening, and account for swing clearance over the driveway grade before we ever order steel. If the pilasters show mortar cracks, we address the footing before hanging anything on them.
Pedestrian Gate Installation
Pedestrian gates next to driveway gates serve a specific purpose in Sandy Springs: they let delivery drivers and landscapers in without opening the vehicle gate. Those gates see more cycles per day than the driveway gate. We hang them with commercial-grade hinges and self-closing hardware, sized for the traffic they’ll actually get. A pedestrian gate on an HOA-managed property should match the community’s ironwork profile, and we document the finish for architectural review.
Sliding Gate Installation
Sliding gates make sense on Sandy Springs driveways with steep approaches, where a swing gate would need too much clearance. They also fail differently. Ice storms freeze the rack-and-pinion track solid, and if the opener tries to force the gate through ice, teeth shear off the rack. When we install a slide gate here, we spec the rack and motor for the slope and for Georgia’s winter ice pattern, not just for the gate’s weight.
Swing Gate Installation
Swing gates are the legacy standard in Sandy Springs, and most of them hang from masonry pilasters that were poured 30 to 50 years ago. A new swing gate installed on a post that’s 3/4 inch out of plumb will fail early, no matter how well the hinges are welded. We check the post before we hang the gate. If the footing is cracked, we’ll tell you and give you a written price to fix it, because a swing gate operator is only as stable as the post it’s bolted to.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Sandy Springs
We install and service nine gate automation brands, which means we’re not steering you toward a replacement motor just because it’s the only one we stock. For Sandy Springs homes with legacy equipment, we regularly work on Linear and Viking units from the 1980s and 1990s, and we retrofit Ghost Controls and BFT openers when an original board is no longer available. If the motor on your property is obsolete, we’ll tell you what conversion looks like in dollars, and you’ll see the number in writing before we order parts.
Common Gate Installation Problems We See in Sandy Springs Homes
- Cracked pilasters after an ice storm. Freezing rain seeps into mortar joints, and the freeze-thaw cycle widens the crack. A new operator on a cracked pilaster will tear the post out of alignment within a season.
- Obsolete control boards with no replacement parts. Early Eagle and HySecurity slide-gate boards are discontinued. A power surge kills them, and the only honest repair is a full operator swap. We’ll show you the board and explain why it can’t be rebuilt.
- Tree limb damage to double swing gates. Sandy Springs protects its tree canopy, which means big pines overhang a lot of driveways. Summer thunderstorms drop limbs that bend top rails and snap hinge welds at the post.
- Pre-UL 325 gates without safety sensors. Gates hung before modern safety standards often have no photo-eye and no reversing mechanism. Retrofitting safety onto an old gate is usually possible, and we’ll quote it as a separate line item so you know exactly what you’re paying for.
Pricing for Gate Installation in Sandy Springs, GA
A single swing gate on an existing, structurally sound post in Sandy Springs typically runs $1,800 to $4,200 installed, depending on the size, material, and whether we’re adding a new operator. Double driveway gates range from $4,500 to $11,000. Slide gates run $5,000 to $14,000, with the higher end covering longer spans on sloped driveways near Mount Paran Road. Pedestrian gates are usually $900 to $2,500. If the pilaster needs footing work, add $1,200 to $3,800. The price we hand you is the price you pay, written before any tool comes off the truck, and it’s yours to keep whether you hire us or not. Call (928) 260-0864 for a free estimate on your specific opening.
We Also Serve Cities Near Sandy Springs
While this page covers Gate Installation work across Sandy Springs, our crews also handle projects in Atlanta, Roswell, Johns Creek, and Alpharetta. If you’re one town over and wondering whether we’ll come to you, the answer is usually yes. Read more about our wider coverage on the Sandy Springs page, or call and ask.
Serving Sandy Springs, GA - Our Local Coverage Area
We’re based in the Sandy Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sandy Springs
Yes. Steep slopes are common on Mount Paran and Riverside Drive properties, and they require a slide gate with a rack and motor spec’d for the grade. We measure the slope before quoting, and the written estimate will show the rack type and motor capacity. Call (928) 260-0864 to schedule a free measurement.
Yes. We’ve submitted to Sandy Springs architectural review boards before, and we know what they want: a materials spec, a finish sample, and a site plan showing set-back and swing path. We prepare that package as part of the job, which usually keeps ARC review to one cycle instead of three. Our documentation habit means the submittal is complete the first time.
Only if the post is still sound. On a Mount Paran Road estate we found an original Linear operator on a brick pilaster with the hinge post pulled 3/4 inch out of plumb. Our crew set a new post footing with helical piers, reset the post, and converted the obsolete board to a modern LiftMaster with a safety photocell. The HOA passed it on the first submittal. If your post is cracked, we’ll tell you before we sell you an operator, and we’ll give you a written price to fix the footing.
Yes. Solar openers work well in Sandy Springs because the city gets enough direct sun to keep a battery bank charged through Georgia winters, with the caveat that extended overcast periods after an ice storm can drain a marginal panel. We spec the panel and battery together, not as an afterthought, and the written estimate shows the full parts list.
Usually just the rack and sometimes the pinion gear, assuming the gate frame itself is straight and the track isn’t bent. We’ll photograph the stripped section, measure the remaining rack for wear, and give you a written price for a rack-only replacement before recommending anything more. If the gate frame is twisted from a limb hit, we’ll show you the photos and let you decide with real numbers in front of you.
Need a gate installed, retrofitted, or honestly assessed in Sandy Springs? Call Vance Gate Repair at (928) 260-0864. A live person answers, and your written estimate is free. We’ll tell you what you found, what it costs, and what we left behind when the job is done.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Sandy Springs since 2014.