Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Atlanta
A new driveway gate in North Atlanta typically runs $4,800 to $14,500 installed, depending on whether it’s a single swing gate or a full sliding gate with an operator and safety photocells. Most single-family installations take one to two days on site once the gate is fabricated. If you’re inside a gated community, the timeline stretches to include HOA architectural review, which we’ll walk through before you spend a dollar. Call (928) 260-0864 and you’ll get Adrian Vance or a technician who can tell you, in writing, what the job costs before we order the first piece of steel.
Why Vance Gate Repair Is North Atlanta’s Preferred Gate Installation Company
We spend more time inside North Atlanta HOA communities than any other part of metro Atlanta. That means we know what a Sandy Springs board will ask for before they ask it: elevation drawings, finish samples, operator specs, and a written statement confirming UL 325 compliance on every safety edge and photocell. Most gate companies show up ready to weld. We show up ready to present. That difference is why North Atlanta property managers and homeowners keep our number in their phones.
Since 2014, Adrian Vance and our technicians have completed 22,000+ gate repairs and installations across the region. Every job, including every North Atlanta install, goes out with a written price before work starts and a documented photo record when the crew leaves. You’ll see what we found, what we set, and what we installed. No guessing later. Under our 365-Day Done Right Promise, if the gate isn’t right within a year, we come back and make it right at no charge.
Our Gate Installation Services in North Atlanta
Swing Gate Installation in North Atlanta
Swing gates are the most common style we install in North Atlanta’s 1980s and 1990s brick-traditional subdivisions. A single swing gate across a standard 12- to 14-foot driveway opening in Buckhead or Dunwoody gives you full closure without eating a lot of yard space. The catch is what’s underneath: Georgia red clay heaves seasonally, and old hinge posts that weren’t set below the frost line or anchored into concrete will move. We set new posts deep, in poured concrete, and we photograph the pour before backfill. A swing gate with a BFT or Ghost Controls operator starts around $5,200 installed in North Atlanta.
Sliding Gate Installation in North Atlanta
When a driveway slopes or the setback is too tight for a swinging leaf, a sliding gate makes sense. North Atlanta lots in Sandy Springs and along Roswell Road often have steep grade changes that would bind a swing gate in six months. A slide gate rides on a track and cantilever rollers, so the grade matters less. We install both track-style and cantilever sliding gates, sized for the driveway and the operator duty cycle. Expect $7,800 to $16,000 in North Atlanta for a powered sliding gate with a Viking or Linear operator, depending on gate length, material, and whether we’re cutting track into existing concrete.
Security Gate Installation in North Atlanta
For North Atlanta HOAs that manage a community entrance or a shared side gate, the requirements change substantially. These are access-control projects, not just gates. We coordinate with your property manager, match the existing entrance aesthetic, and integrate the gate with DoorKing or Linear intercom systems already on site. A single community security gate in Alpharetta or Johns Creek typically lands between $9,500 and $22,000 installed, including operator, safety loops, and intercom tie-in. We provide the wiring diagram to the HOA before we leave.
Double Gate Installation in North Atlanta
Wider driveways, circular motor courts, and estate lots in North Atlanta often call for a double swing or double slide gate. The advantage is smaller leaf size per panel, which means less strain on hinge hardware and operators. The cost runs roughly 30 to 45 percent above a comparable single gate because you’re installing two posts, two leafs, and often two operators with a synchronized board. For North Atlanta homes with a 16-foot or wider opening, a double swing gate is usually the right call over a heavy single leaf.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Atlanta
We work on whatever motor is already on the property. Our North Atlanta technicians service and install BFT, Linear, Viking, and Ghost Controls operators, along with DoorKing, LiftMaster, FAAC, Elite, and Mighty Mule. That matters here because North Atlanta gated communities have a generational spread: 25-year-old DoorKing intercoms in Dunwoody, mid-life LiftMaster operators in Sandy Springs, and newer cloud-connected units in Alpharetta. We stock common replacement boards, remotes, and photocells on the truck so a North Atlanta install doesn’t stall over a part that had to ship from Dallas.
Common Gate Installation Problems We See in North Atlanta Homes
- Red clay heaving pulls hinge posts out of square. Georgia clay expands and contracts with rain and drought. A post set shallow in 1994 is rarely plumb by 2026, and a new gate hung on that post will bind and sag within a year. We don’t hang new gates on old posts until we’ve checked them with a level and a tape, not just an eyeball.
- HOA approval delays lead to rushed footings. Boards in North Atlanta can take 30 to 60 days to review a gate application. Homeowners who waited until the last minute then want it done this week end up with concrete poured on a Friday and a gate hung Monday. Concrete needs seven days to cure before you hang 600 pounds of steel on it. We schedule accordingly and tell you the honest timeline.
- Old loop detectors buried under cracked asphalt. In older Sandy Springs and Dunwoody subdivisions, vehicle loop detectors are often under 25-year-old asphalt that’s shifted in the clay. A new gate installed without checking the existing loop means the gate won’t open when you pull up. We test loops before installation and splice new wire without a full asphalt cut where possible.
- Operators installed without UL 325-compliant safety edges fail HOA inspection. Any gate operator in North Atlanta must have monitored safety photocells and a reversing edge that meets UL 325. An install that skips this gets flagged, and residents get stranded. We document the safety system on every install and include the compliance record in your job file.
Pricing for Gate Installation in North Atlanta, GA
Here are real numbers for North Atlanta’s market. A single swing gate with a BFT or Ghost Controls operator: $5,200 to $8,400. A single sliding gate with a Viking or Linear operator: $7,800 to $16,000. A double swing gate for a wide motor court: $8,500 to $18,000. A community security gate with intercom integration: $9,500 to $22,000. These are installed prices including the gate, operator, safety photocells, mounting hardware, and our written documentation.
What moves the price in North Atlanta: gate size and weight, whether we’re pouring new posts or reusing existing ones (we rarely reuse them), operator brand and duty cycle, and whether HOA drawings and submissions are included. We hand you the written price before any work starts, per Haven Standard Clause 1. You’ll never get a surprise invoice at the end. Call (928) 260-0864 for an exact quote on your property; estimates are free.
We Also Serve Cities Near North Atlanta
In addition to Gate Installation in North Atlanta, our crews cover Atlanta, Sandy Springs, Roswell, and Johns Creek. If you’re inside a gated community anywhere in the northern metro, the same Gate Installation team and the same written-price standard apply.
Serving North Atlanta, GA - Our Local Coverage Area
We’re based in the North Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Atlanta
In most North Atlanta HOA communities, yes. Nearly every gated subdivision in Sandy Springs, Dunwoody, Alpharetta, and Johns Creek requires architectural board approval for gate style, height, and finish before installation. Even a free-standing driveway gate on a single-family lot is often treated as an architectural modification. We prepare the renderings, material specs, and operator documentation your board needs, and we can attend the review meeting if the board allows it. Call (928) 260-0864 and we’ll tell you what your specific HOA’s process looks like.
Yes, we do it regularly in North Atlanta. For community entrances and shared side gates, we coordinate directly with your property manager or HOA board: drawings and submittals, compliance documentation, scheduling around resident access, and a written scope of work for board approval. We’ve handled this in gated communities from Buckhead to Alpharetta. You’ll get the same documented photo record and written price, just addressed to whoever signs the contract.
In North Atlanta, we almost always replace old hinge posts rather than reusing them. Georgia red clay heaves seasonally, and a post that’s been in the ground 20 or 30 years has almost certainly moved. We dig the old post out, pour a new concrete footing deep enough to get below the active clay zone, set the new post, and let it cure before hanging the gate. You get photos of the hole, the pour, and the post set before backfill. Reusing an old post is faster, but it’s how you end up with a sagging gate in 14 months.
Yes. Most North Atlanta gated communities run DoorKing or Linear intercoms, and we match operators to those systems rather than tearing everything out. If your community has a legacy intercom that still works, we can often install a new Viking, BFT, or Ghost Controls operator and tie it into the existing call box and resident access controls. If the intercom is dead, we’ll quote you the replacement as a separate line item before any work starts, so the board knows exactly what’s included.
In most North Atlanta cases, yes. We splice new loop wire into the existing loop circuit without a full asphalt cut wherever the old loop’s wire ends are still accessible. If the old loop is completely dead and buried under decades-old asphalt, a cut becomes necessary, but we keep the cut as narrow as possible and patch it after. This matters for HOA entrances where a full driveway cut shuts down resident access for a day. We’ll tell you which situation you’re in before we break ground. Call (928) 260-0864 for a property-specific answer, free.
Written by Adrian Vance, Owner at Vance Gate Repair, serving North Atlanta since 2014.