Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Installation in Moore, OK: What You’ll Pay and How the Work Goes
A full gate installation in Moore, Oklahoma typically runs $1,400 to $4,800 depending on whether you’re replacing a single swing gate, installing a double driveway gate, or adding automation. Most jobs are quoted in writing and scheduled within the same week. Call (928) 260-0864 and we’ll walk you through a line-item price range before anyone sets foot on your property.
Moore’s gate stock is older than people think. A lot of what we see near Janeway Avenue, the neighborhoods off Eastern Avenue, and around Buck Thomas Park are gates that went in during the insurance-rebuild push after 2013, or gates that predate it entirely. Both groups fail differently, and knowing which one you have changes the recommendation. We’ll get into that.
This page covers what installation actually costs here, what we see going wrong on Moore properties specifically, and how to decide whether to retrofit or replace. If you already know your gate is done and you just want a number, call us. Written price, before any work starts, every time.
Why Vance Gate Repair Handles Gate Installation Across Moore
Vance Gate Repair is led by Adrian Vance, who started in commercial access-control work in 2014 and brought that documentation habit into residential gate work. Every installation we do in Moore gets the same treatment: a written scope, a written price, and a photographic record left with you when the job is done. Under The Haven Standard, Clause 4 (Evidence on every job), you get a photo log of what was found, what was set, and what was installed. No guessing later.
We dispatch background-checked, uniformed technicians from our Oklahoma City office to Moore jobs throughout the week. Scheduling is straightforward: when you book, you get the technician’s name and photo before arrival, so you know who’s pulling into the driveway. Moore homeowners tend to appreciate that. A lot of them already went through one round of contractors they’d never met doing work they couldn’t see.
Our Gate Installation team works on nine automation brands, including BFT, Linear, Viking, and Ghost Controls. That matters because Moore has a mix of operators: 2000s-era LiftMaster and DoorKing units on rebuild-era homes, newer Ghost Controls kits on DIY projects, and occasional commercial-grade FAAC and Viking units on larger properties. We service what’s already on the gate instead of pushing a replacement just because it’s what we sell.
Our Gate Installation Services in Moore
Driveway Gate Installation
Driveway gates in Moore are almost always swing-style on residential lots, particularly in subdivisions off SW 19th Street and around Santa Fe Avenue where fenced backyards meet wide front drives. A single steel or aluminum driveway gate installed runs $1,600 to $3,200 on average, including hardware and a clay-stable post set. Double driveway gates add material and labor, typically landing between $2,800 and $4,800 if we’re rebuilding both hinge posts.
Post depth is the single biggest predictor of whether a Moore driveway gate lasts ten years or starts leaning in three. The shrink-swell clay here doesn’t reward shortcuts.
Pedestrian Gate Installation
Pedestrian gates in Moore see less mechanical stress than driveway gates, but they fail from the bottom up. Wood posts rot at grade in wet winters; steel posts rust where sprinkler overspray hits them. A new pedestrian gate with a proper concrete-set post and adjustable hinges runs $450 to $1,200. If the run of fence on either side is still sound, we can usually set a new post without disturbing the fence line.
Sliding Gate Installation
Sliding gates are less common in Moore residential work, but we install them where a driveway slopes or where a swing arc would hit a parked car or a utility box. A cantilever or V-track sliding gate starts around $3,500 and goes up with automation. Moore’s soil movement affects sliding gates differently: the track bed has to be compacted and stabilized or the gate binds within two years. We build for that.
Swing Gate Installation
Swing gates are the default in Moore, and for good reason: they’re cheaper, simpler, and they handle wind better than a full-panel slider with no relief. But Moore’s southwest winds load swing gates constantly, and undersized hinge posts fail fast. We spec heavier-gauge posts and through-bolted hinges on every swing gate we hang here. A single swing gate install with standard hardware runs $1,400 to $2,800; a double swing gate runs $2,600 to $4,700.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Moore
Nine brands, one service call. We stock parts for BFT, Linear, Viking, and Ghost Controls locally, and we can usually source anything else within a day or two through our supplier network. That matters when a control board dies on a 2014 rebuild-era gate and the homeowner just wants the exact replacement board, not a sales pitch for a whole new operator. We’ll tell you honestly when a board swap makes sense and when it doesn’t.
Common Gate Installation Problems We See in Moore Homes
Moore’s gate failures are predictable if you know the local history. Here’s what we actually encounter, in order of frequency:
- Heaved hinge posts on 2013-2016 rebuild gates. Post-tornado reconstruction moved fast. Many gates were poured in shallow fast-set concrete that never reached below the frost line or through the active clay layer. A decade on, those posts are tilting and shoving gates out of plumb. This is the dominant repair ticket in south Moore, especially near the old tornado corridor.
- Rot and rust on 1970s-1990s original gates. Ranch-style homes built before the tornado often have original wood gates on original posts. The posts rot at grade, the hinges corrode, and the gate sags until it drags. By the time we see it, the fix is usually a full post reset, not a hinge swap.
- Obsolete operator control boards. Pre-2013 operators frequently lack modern UL 325 entrapment protection. You cannot legally retrofit some of these boards to current safety standards. When that’s the case, we say so plainly and price a replacement operator rather than patching a board that leaves a pinch-point risk.
- Warped wood frames from summer heat. Moore’s July and August temperatures bake wood gates until frames twist. If a wood gate is already old, heat-warp is often the thing that finishes it. Metal frames don’t warp, which is one reason we lean steel or aluminum on full replacements.
Pricing for Gate Installation in Moore, OK
Here are honest, Moore-specific ranges. A pedestrian gate runs $450 to $1,200. A single swing driveway gate runs $1,400 to $2,800 installed. A double swing or double driveway gate runs $2,600 to $4,800. A sliding gate starts at $3,500. Adding automation typically adds $900 to $2,200, depending on the operator brand and whether we’re running new low-voltage line.
What swings the price in Moore: post condition (are we resetting in expansive clay or can the existing post stay?), gate material, operator brand, and whether the old gate has to be hauled off. You get a written line-item quote before we start, not a verbal ballpark. No invoice surprise at the end. If another company gave you a written estimate, bring it to us for a free second opinion.
Key Takeaways: Gate Installation in Moore
- Single swing gate: $1,400-$2,800. Double gate: $2,600-$4,800. Pedestrian: $450-$1,200.
- 2013-2016 rebuild gates are failing now, all at once, from shallow post footings in expansive clay.
- Older pre-2013 operators may need replacement, not repair, to meet current UL 325 safety standards.
- Written price before work starts. Photo documentation when we leave. It’s the Haven Standard.
- Call (928) 260-0864 for a free estimate. A live person answers, day or night.
What Moore’s Tornado Rebuild Means for Your Gate
Nothing explains Moore’s current gate problems better than a calendar. The 2013 EF5 obliterated thousands of homes. Between 2013 and 2016, contractors rebuilt at pace under insurance deadlines. Fences and gates went in fast, often with shallow fast-set concrete and whatever materials were on the truck that week. That worked fine for a few years. Then Moore’s red clay soil did what it does: swelled with winter moisture, contracted through summer drought, and began torquing every under-poured post out of true.
The result is a replacement pulse no other Oklahoma City suburb has. Norman and Edmond have older, more settled housing stock. Moore has a wedge of homes all built in the same three-year window, all shedding their gates at once. If your gate went in during that rebuild and it’s now leaning, sagging, or binding, you’re not alone. It’s not bad luck. It’s a shallow footing finally losing to the clay.
In a south Moore neighborhood near the 2013 tornado corridor, our crew reset a leaning swing gate where the hinge post had heaved out of plumb due to shallow fast-set concrete and red clay expansion. We excavated to a proper post footing depth, repoured with a clay-resistant mix, realigned the LiftMaster gate operator and safety photocell, and corrected the sag before re-hanging the gate, saving the homeowner from a full replacement. That’s the difference between a post reset and a new gate. Sometimes one is right; sometimes the other is. We’ll tell you which.
Can You Retrofit or Should You Replace? A Moore-Specific Answer
For rebuild-era gates with heaving posts: if the gate itself is sound and the operator works, a post reset usually fixes it. We excavate, repour at proper depth with a clay-resistant concrete, re-hang the gate, and realign the operator. Cost: $600 to $1,400 depending on post size and how much fence line we have to disturb.
For post-1990 gates with rotted wood posts: you can patch, but you’ll be patching again. A full replacement with steel posts and a metal frame is usually the cheaper answer over five years. That’s not an upsell. That’s arithmetic.
For pre-2013 operators without UL 325 entrapment protection: replace the operator. We won’t splice safety features onto a legacy board and call it compliant. A new operator install with safety photocell wiring runs $900 to $2,200 depending on brand and motor size.
If you want certainty on which category your gate falls into, call (928) 260-0864. We’ll give you a written answer, not a maybe.
We Also Serve Cities Near Moore
Beyond Moore, our crews cover Gate Installation in Moore neighbors throughout the metro: Oklahoma City, Norman, Edmond, and Midwest City. Same written-quote process, same documentation habit, same live-person phone line. If you’re on the edge of Moore or just outside it, call and we’ll tell you straight whether we can get to you.
Serving Moore, OK - Our Local Coverage Area
We’re based in the Moore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Moore
If your gate was installed between 2013 and 2016 and the post is pulling away from the fence line or the gate drags at the latch side, it’s almost certainly a shallow footing, not normal settling. Rebuild-era contractors often used fast-set concrete at depths of 18 to 24 inches, which is nowhere near enough for Moore’s expansive clay. A gate that’s merely settled will lean slightly but still open; a gate with a shallow footing will bind, scrape, or refuse to latch. We can determine which one you have in about fifteen minutes on site. Call (928) 260-0864 and we’ll schedule it.
If your operator was manufactured before 2013, it likely lacks UL 325 entrapment protection, which means it cannot be made compliant with modern safety standards. Some boards can be swapped to add protection; many cannot. When the board can’t be retrofitted, replacement is the only safe option. We’ll show you the board, explain what it lacks, and give you a written price for a compliant replacement. The quote includes the new operator, safety photocells, and wiring. No pressure, just the facts.
Summer heat in Moore warps wood gates and dries out the clay soil at the same time. The post loses lateral support as the clay contracts, and the gate frame twists in the heat. Together, the hinge side drops and the latch side drags. This is a structural problem, not a hinge problem. The fix is a deeper post reset with a clay-resistant concrete mix, plus through-bolted hinges if the gate is wood. Shimming the hinges will buy a few weeks. It will not last a Moore summer.
For Moore, a steel or aluminum swing gate on heavy-gauge posts is the most durable option. Swing gates handle wind by design because they’re not rigid full panels pushing back against a track. Sliding gates work but need a stable track bed, and Moore’s soil movement makes that a long-term liability. As for material: metal over wood. Wood warps in the summer heat, rots through winter moisture, and splits during ice storms. Metal doesn’t. A steel or aluminum driveway gate costs more up front than wood; it’s cheaper by year five.
Most residential gate replacement in Moore falls under standard fence and accessory structure rules, which generally do not require a permit for like-for-like replacement on an existing post or fence line. If you’re adding a new driveway gate where none existed, or changing the driveway approach, a permit may be required. We’ll check current City of Moore requirements for your specific job and include any permit fees in the written quote before work starts. Call (928) 260-0864 and we’ll walk through it.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Moore and the surrounding metro.