Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Norman
A new driveway gate in Norman typically costs between $2,800 and $9,500 installed, depending on whether it’s a single swing, double swing, slide, or ornamental steel build. We schedule most Norman installations within two to three weeks, and you’ll have a written price in hand before anything gets ordered. Our crews know the streets, the clay, and the storm history of this city, which means we don’t just hang a gate. We build it to stay plumb through the next tornado season. Call (928) 260-0864 and you’ll get a live person, not a voicemail tree, any hour of the day.
Why Vance Gate Repair Is Norman’s Preferred Gate Installation Company
Since 2014, Adrian Vance and our crews have worked on more than 22,000 gates across central Oklahoma, and Norman has its own particular rhythm to that work. The calls we get from University Park, Hallbrooke, and south Norman subdivisions are heavy on post problems and operator retrofits, because the housing stock and the soil underneath it are older than what you’ll find in newer exurbs. Homeowners here tend to have done their research before calling. We respect that. You’ll get a written scope, a written price, and a photo record of the finished job before we roll the truck away.
Every installation follows The Haven Standard. Clause 1 means the price is in writing before any work starts. Clause 4 means you get a documented photo record of what we found, what we set, and what we installed. And the 365-Day Done Right Promise covers the entire job for a full year. If something isn’t right, we make it right. No argument, no fee. That’s the same standard we bring to a 1940s chain-link gate near campus or a 1990s ornamental iron driveway gate in south Norman.
Our Gate Installation Services in Norman
Driveway Gate Installation
Most driveway gate work we do in Norman falls into two camps. Newer subdivisions want a clean, automated steel or aluminum gate that matches the house. Older neighborhoods, especially around the OU campus and along Classen Boulevard, need the old gate pulled, the post footings assessed, and a decision made about whether the existing concrete can hold a new panel. We install single and double driveway gates across Norman, and we’ll tell you plainly if a retrofit makes more sense than a full replacement. Every job includes a written record of the operator brand, the limit settings, and the safety device placement.
Pedestrian Gate Installation
Pedestrian gates in Norman don’t get the same attention as driveway gates, but they fail for the same reasons. Clay heave pushes the latch post out of alignment, the gate starts dragging, and eventually the hinges tear out. We install new pedestrian gates with post footings dug below the shrink-swell zone so the latch doesn’t bind every spring. If you’ve got an older wooden gate in a neighborhood like Brookhaven or Larsh-Miller, we’ll quote you both the gate replacement and what it costs to fix the post properly.
Sliding Gate Installation
Sliding gates are worth serious consideration on narrow Norman driveways where a swing gate would block the car or carve an arc into the grass every time it opens. The tradeoff is that a slide gate needs a longer track or cantilever rail and usually a heavier post system. We do a lot of slide gate conversions for homeowners whose swing gates have been beaten by years of Norman thunderstorms. A proper slide conversion on a 25-foot driveway opening in Norman typically runs $4,500 to $11,000, including the operator and entrapment protection.
Swing Gate Installation
Swing gates remain the most common installation in Norman, especially double swing setups for wide driveways in neighborhoods built from the 1980s through the early 2000s. The mistake we see repeatedly is hanging a heavy steel or wood panel on undersized posts set in shallow concrete. When the clay under the footing swells or a tornado’s straight-line winds hit the panel, the post rotates and the entire gate sags. We install swing gates with footings below the clay shrink-swell line and sag correction that accounts for Norman’s seasonal movement. Our Gate Installation team documents every hinge point and limit setting before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Norman
We install and program operators from across the market, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a BFT or Linear operator in Norman that’s still in good shape but the gate itself is done, we’ll match the new gate to that motor and save you the cost of replacing both. The same applies to Viking and Ghost Controls units that have survived several Oklahoma storm seasons. You don’t need to replace a working operator just because the gate panel is tired, and we won’t steer you that way.
Common Gate Installation Problems We See in Norman Homes
- Hinge posts set in crumbling concrete. Most original chain-link and wrought-iron gates from the 1940s through the 1960s near the OU campus have footings that disintegrate when we pull the panel for re-hanging. That means a full post replacement rather than a simple hardware swap, and we’ll show you a photo of the old footing before we pour the new one.
- Clay heave throwing posts out of plumb. Norman’s expansive clay soils swell in wet springs and shrink in summer heat. A post that was dead level when installed in July can be off by half an inch by March. That half inch becomes a dragging gate and a misaligned latch, and it only gets worse each season.
- Old gates missing modern safety devices. Swing gates installed before current safety standards often lack working photocells or edge sensors. After a storm or a few years of clay movement, the entrapment zone widens enough that an operational gate becomes a liability. We include current entrapment protection on every new install in Norman.
- Ice storm loading on oversized panels. Norman takes real ice storm hits, and those add serious weight to a gate frame. Wooden privacy gates from south Norman’s 1980s and 1990s buildout carry heavy panels on undersized post, and a quarter inch of ice is enough to shear the hardware or crack the post at ground level.
Pricing for Gate Installation in Norman, OK
Here’s what we quote most often in Norman. A single swing driveway gate, ornamental steel, roughly 10 to 12 feet wide, runs $2,800 to $4,800 installed. A double swing gate for a wider driveway is $4,200 to $7,500. A cantilever slide gate is $4,500 to $11,000 depending on track length and panel material. A pedestrian gate, installed with a new post dug below the shrink-swell line, is $950 to $2,400. Those ranges include the operator on automatic gates, photo-eye entrapment protection, the written job record, and the 365-Day Done Right Promise. Every price is quoted in writing before we order material or cut a single post. Call (928) 260-0864 for a free estimate on your specific gate design.
We Also Serve Cities Near Norman
Our crews cover Gate Installation in Norman and the surrounding metro, including Mustang, Oklahoma City, Yukon, and Edmond. If you’re just outside the Norman city limits, call us and we’ll confirm scheduling for your address.
Serving Norman, OK - Our Local Coverage Area
We’re based in the Norman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Norman
In most cases we can retrofit a new operator onto an existing gate, provided the posts are sound and the panel isn’t sagging beyond correction. What kills a retrofit in Norman is usually not the gate frame but the footings. If the hinge posts are set in crumbling concrete from the original construction, putting a new motor on that gate just automates a structural problem. We’ll assess the posts first, show you photos, and give you a written quote for both the retrofit and the replacement so you can compare the actual numbers. Call (928) 260-0864 and we’ll schedule a free look at your gate.
That’s Norman’s expansive clay soil at work. Central Oklahoma clay swells dramatically when it takes on moisture in the spring, then shrinks in the drying summer heat. Your gate posts sit in that soil, and each swell-shrink cycle rotates the post a fraction of a degree and moves the latch alignment. Over a few years, those fractions become an obvious bind. The fix is typically new post footings dug below the shrink-swell line, not a new gate panel. We quote the footing work separately from the gate work so you can see what’s actually driving the problem.
You’re describing a classic peripheral straight-line wind effect on clay soil. The tornado didn’t have to hit your house. The wind rotates your gate posts by a few degrees, the clay holds them in that new position, and the gate seems fine for a week or two. Then the soil re-compacts around the displaced post and the gate starts binding or unlatching on its own. We’ve seen this pattern repeatedly in Norman and across Cleveland County, including a double swing gate in the Hallbrooke addition that needed both hinge posts reset after a Moore storm missed the street but bent the gate geometry just enough to misalign the photocells. Call (928) 260-0864 and we’ll put a level on it and show you what moved.
On a narrow driveway, a slide gate often makes more sense than a swing gate because it travels parallel to the fence line and doesn’t sweep across the driveway or into your landscaping. The tradeoff is cost: a slide conversion requires a track or cantilever system, stronger posts, and a different operator. For a typical Norman driveway, a slide conversion runs $4,500 to $11,000 compared to $2,800 to $4,800 for a single swing. We’ll quote both options and lay out the space requirements in writing so you can decide with real numbers.
Automatic gate operators in Oklahoma must meet the entrapment protection requirements in UL 325, which means photocells, edge sensors, or other monitored safety devices that stop and reverse the gate if something enters the path. An old Norman gate installed before these standards were widely adopted often has no working safety devices at all, and if the posts have shifted, the entrapment zone may be larger than the original installation accounted for. A gate that works fine mechanically can still be a serious safety deficiency. Every new gate we install in Norman includes current entrapment protection, documented in the photo record, and we’ll flag any existing gate that doesn’t meet the standard. Call (928) 260-0864 to have your gate checked.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Norman since 2014.