Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Farragut
A new driveway gate in Farragut typically runs $4,200-$9,800 installed, and the work usually takes two to three days once materials are on site. The single biggest variable here isn’t the gate itself. It’s HOA architectural approval. We coordinate with Farragut’s review boards, source panels that match original ornamental spec, and hand you a written price before any work begins. Call (928) 260-0864 for a free estimate.
Farragut is different from most of Knox County. The subdivision covenants, the architectural review committees, the powder-coated ornamental ironwork everywhere. We know the Fox Den review standards, the Concord Road corridor subdivisions, and the older planned communities off Kingston Pike where original scrollwork has to be matched exactly. That’s not something you pick up on a first visit. That’s learned by doing the work here, repeatedly.
Why Vance Gate Repair Is Farragut’s Preferred Gate Installation Company
Our Gate Installation team handles the full supply chain: measuring, HOA documentation, custom fabrication when needed, operator installation, and the final walkthrough with photo records. Farragut homeowners reach out to us most often because another company quoted a generic stock panel that their architectural committee rejected. We don’t make that mistake.
Vance Gate Repair, led by Adrian Vance, has been doing gate work since 2014. Adrian started in commercial access control, where documentation isn’t optional. That habit carries over: every Farragut job we install leaves with a written scope, a written price under Haven Standard Clause 1, and a photo log of every adjustment and component. You see what we did. You can hand that record to your HOA if they ask for proof of compliance.
Dispatch to Farragut is coordinated from our Memphis office, and crews serve the area locally. Calls are answered by a live person 24/7. No voicemail loop. When a winter ice storm seizes a gate operator in the middle of the night, you get a person on the phone, not a callback promise.
Our Gate Installation Services in Farragut
Driveway Gate Installation
A new automated driveway gate in Farragut’s larger lots, typically off South Campbell Station Road or Virtue Road, usually means a swing or slide configuration depending on setback and grade. We measure the opening, check the driveway slope, and recommend the configuration that will actually hold up to East Tennessee weather. Written price covers the gate, posts, operator, safety photocells, and concrete work. No line item appears that wasn’t in the original scope.
Pedestrian Gate Installation
Pedestrian gates in Farragut neighborhoods often need to match the driveway gate’s ornamental pattern. That’s the aesthetic conformity issue we mentioned. If the driveway gate is powder-coated steel with a specific scroll, the pedestrian gate should read as part of the same composition. We source from the original fabricator when possible, and if that’s not feasible, we have a local shop that replicates scrollwork to spec.
Sliding Gate Installation
Sliding gates fit Farragut properties where the driveway slopes toward the road or where a swing gate would arc over a sidewalk. We install cantilever and track-style slide systems. The operator choice matters here: Viking and DoorKing both make slide operators that perform well in high humidity, but the install detail is what determines longevity. The gate has to move square on the track. If it doesn’t, you’ll replace rollers every two years.
Swing Gate Installation
Swing gates are the most common in Farragut’s established subdivisions, and they carry the most HOA exposure. The gate style, height, finish, and even the operator arm color can all be subject to review. We recently installed a swing gate in a Fox Den subdivision where the HOA required exact replication of the original scrollwork. Our tech sourced the original manufacturer, matched the powder-coat finish, and coordinated with the management company for architectural approval before setting the hinge post and programming the LiftMaster gate operator with safety photocells. That’s the whole job, not just the metal part.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Farragut
We work on whatever motor is already on the property, or whichever one makes sense for a new install. Nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Farragut specifically, Viking and DoorKing slide and swing operators appear often in the older subdivisions. Ghost Controls shows up on newer retrofit kits. We don’t steer you toward a replacement if the existing operator is serviceable. The price is written down before anyone touches a wire.
Common Gate Installation Problems We See in Farragut Homes
- HOA rejection of non-matching gate panels. This is the number one delay in Farragut. A homeowner buys a stock gate online or through a big-box installer, the architectural committee flags it, and the whole project stalls. We handle this from the start: photo documentation of the original, spec matching, and approval before ordering.
- Winter ice storm damage to arm brackets and welds. Glaze ice loading on decorative arms bends brackets and cracks ornamental welds. The hinge post develops sag over time. We see this most after January storms that linger below freezing for several days.
- Rust creep at chipped powder-coat edges. Valley humidity is steady year-round. Any scratch or chip in a powder-coated finish becomes a rust point within months. On a new install in Farragut, we touch up every hardware cut point and document the seal on the post footings.
- Post footing failure in heavy clay soil. Farragut’s soil is clay-heavy in many subdivisions, especially on the south side toward the river. Undersized footings shift over freeze-thaw cycles. We size the concrete base for the gate weight and the soil condition, not just a generic depth.
Pricing for Gate Installation in Farragut, TN
Here’s the straight pricing. A single swing driveway gate with standard ornamental steel runs $4,200-$7,000 installed. A double swing gate on a wide driveway runs $6,500-$9,800. Sliding gates run $5,000-$8,500 depending on track length and operator choice. Pedestrian gates with matching ornamental work run $1,400-$2,600. If custom fabrication or original-manufacturer sourcing is needed, add $800-$2,200 to the material line, and that’s disclosed in writing before we order anything.
These ranges cover the gate, posts, operator, safety photocells, concrete, and the full documentation record. They do not include HOA application fees, which go directly to your management company. The price is quoted and agreed before any work starts. That’s Haven Standard Clause 1, and it applies to every job in Farragut.
We Also Serve Cities Near Farragut
Beyond Farragut, our crews cover the surrounding East Tennessee market, including Knoxville, New South Memphis, Memphis, and Nashville. Each area has its own subdivision patterns and HOA norms. The same written-price commitment and photo documentation carry over everywhere we work.
Serving Farragut, TN - Our Local Coverage Area
We’re based in the Farragut area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Farragut
In almost every Farragut subdivision with covenants, yes. Some committees require the application and photo of the proposed gate before ordering. We assemble the documentation package for you and coordinate with the management company. If approval is denied, we revise the spec and resubmit. Call (928) 260-0864 and we’ll help you figure out what your specific HOA requires.
Yes. In Fox Den and other older Farragut subdivisions, this is often mandatory. We trace the original pattern, attempt to source the original fabricator, and if that’s not available, work with a local custom shop that replicates scrollwork to spec. The matched panel photos go into your HOA submission and into your permanent job record.
Ice storms deposit glaze that adds 20 to 40 pounds of load to decorative gate arms. That bends brackets, seizes actuator arms, and can crack welds at the hinge post. If your operator strains against the ice load, you’ll hear it: a low grinding sound from the arm. Call (928) 260-0864. We’ll inspect the freeze damage and give you a written repair price.
Any automatic gate must have photo-eye entrapment sensors, a reversing mechanism, and a compliant force limit setting. This is code, not an upsell. We set the limit switch to actual gate travel, photograph the final positions, and leave the readings in your job record. If a gate is installed without compliant sensors, it’s unsafe for kids and pets. Don’t accept it.
Yes. We communicate directly with the property manager, submit the required documentation, flag any edge cases before they become denials, and schedule the work around the committee’s review timeline. You shouldn’t be the middleman. That’s part of what the written price covers: the paperwork is included in the quote, not billed as an add-on. Call (928) 260-0864 for a free estimate.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Farragut and the surrounding counties since 2014.