Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Weymouth, MA
Gate motor and opener repair in Weymouth usually comes down to two things: salt corrosion on wiring and limit switches, or frost heave pushing posts out of alignment so the motor works against a gate it can no longer move cleanly. Most jobs we handle in Weymouth are on postwar Capes, colonials, and ranch homes where the original gate hardware dates back decades, plus the newer ornamental gates going in around Union Point. If your opener is grinding, stopping mid-travel, or refusing to respond, call (928) 260-0864 and we’ll name the price before anyone touches a tool.
Why Weymouth Homes Are Different
Weymouth’s position on the South Shore puts neighborhoods like Weymouth Neck, North Weymouth, and the streets running along the Back River directly in the path of salt-laden air sweeping off Boston Harbor. That marine exposure means steel gate frames, zinc-plated hinges, and exposed opener wiring rust through far faster here than they do in Braintree or Abington, just a few miles inland. We routinely see zinc hardware fail in two to three winters on the coastal side of town, particularly on gates facing east. Stainless steel or hot-dip galvanized hardware is not an upgrade in Weymouth; it is the only hardware that survives.
The housing stock compounds the problem. Most Weymouth homes were built between the 1940s and 1970s, and the original wooden posts and steel gate frames from that era are now past their service life. Add Massachusetts freeze-thaw cycles that heave posts a quarter inch or more each winter, and you get gates that bind on their hinges by spring, latches that miss the strike plate, and automatic openers that trip their force sensors every third cycle. The newer HOA communities around Union Point have ornamental metal gates that are prettier, but they are not immune to the same coastal air and the same shifting ground.
Our Main Weymouth Services
Weymouth homeowners call about two gate services more than any others: repair work that keeps an existing gate functional, and full installations when the old gate has finally rusted or shifted past the point of repair. Both are covered below with their own dedicated Weymouth pages.
Gate Repair in Weymouth
Repair work in Weymouth means diagnosing what the salt air and the freeze-thaw cycle have done to your gate, then bringing it back to proper function without replacing what does not need replacing. The most common failures we find in Weymouth are corroded hinge pins, rusted latch hardware, posts pulled out of plumb by frost heave, and opener wiring that has been eaten by moisture. We quote the repair in writing before any work starts, photograph the damage before and after, and leave you with a record of every part number installed. See the full local breakdown on the Gate Repair in Weymouth page.
Gate Installation in Weymouth
When a Weymouth gate is too far gone, or when a homeowner wants to upgrade to something that can actually stand up to the coastal air, installation is the right conversation. The key decisions in Weymouth are material selection and hardware spec: stainless or hot-dip galvanized hinges and latches, posts set below the frost line, and frame coatings rated for marine environments. Weymouth is not an inland town, and a gate installed with big-box zinc hardware will be sagging within two winters. We measure, order, and schedule installations in writing, with a full price before the job is confirmed. That process lives on the Gate Installation in Weymouth page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Weymouth
Gate motor and opener work in Weymouth is defined by what the salt air does to electrical connections and what the frost does to gate alignment. On a postwar Cape or colonial in North Weymouth or Weymouth Neck, it is common to find the opener’s low-voltage wiring corroded inside its jacket, the limit switch reading wrong because the gate has shifted, and the motor working overtime against a post that is no longer plumb. The result is an opener that quits mid-travel, beeps without moving, or slams the gate because the force settings were cranked up to compensate for a binding hinge. We repair and install openers on all nine major automation brands, including Viking, Ghost Controls, and DoorKing, and every visit ends with a written record of what we found and what we reset. For the full service picture, see our Gate Motor & Opener hub.
Motor Installation
Signs you need it
The existing motor has failed outright, is tripping its thermal overload weekly, or is more than 12 to 15 years old and feeding on corroded wiring that is no longer worth patching.
What it costs in Weymouth
A new gate motor installation in Weymouth typically runs $850 to $2,400 depending on the brand, the swing versus slide configuration, and whether the existing mounting bracket and wiring can be reused.
How we do it
We check the post alignment and travel limits first, mount the new motor, wire it with marine-rated connectors where needed, set the force and limit switches, and photograph the final configuration before we leave.
Motor Repair
Signs you need it
The opener hums but does not move the gate, opens partway and reverses, or cycles on its own, points to a limit switch, capacitor, or control board failure rather than a dead motor.
What it costs in Weymouth
Gate motor repair in Weymouth generally runs $180 to $450, with the lower end covering limit-switch resets and wiring repairs and the higher end covering capacitor or control board replacement on a swing or slide motor.
How we do it
We test the input power, the capacitor, and the limit switch positions, replace or reset the failed part, run the gate through a full open-and-close cycle, and record the new limit positions in the job notes.
What Gate Motor & Opener Costs in Weymouth
| Item | Typical range in Weymouth |
|---|---|
| Motor repair (limit switch, wiring, capacitor) | $180 - $450 |
| Motor installation (new unit) | $850 - $2,400 |
| Control board replacement | $350 - $780 |
How fast can you fix a gate motor in Weymouth?
Most motor repairs are completed the same day we arrive, because the problem is usually a failed limit switch, a corroded wire, or a bad capacitor. Call (928) 260-0864 and we will tell you what the repair likely costs before we dispatch.
Do you work on older gate motors in Weymouth?
Yes. We service motors that are 15 or 20 years old whenever parts are still available, and we will tell you plainly when repair no longer makes sense. The written estimate covers exactly what we found and what the repair costs.
Gate Access Control in Weymouth
Access control in Weymouth sits at the intersection of coastal moisture and security. Keypads and phone entry units installed near the Back River or along Fore River inlets take direct salt spray, which corrodes the terminals and faceplate connections far sooner than inland units. And for the newer HOA communities around Union Point, the challenge is integrating access control with gates that are visually specified by a board but still need to work for residents, delivery drivers, and emergency vehicles. Since 2014, Adrian Vance has carried the commercial access-control habit of wiring documentation and test logs over to residential Weymouth gates, so every keypad or reader we install leaves behind a complete record. The full scope is on our Gate Access Control page.
Keypad Entry
Signs you need it
You want family and regular visitors to open the gate with a code instead of a remote, or the existing keypad keys have worn through and numbers no longer register reliably in wet weather.
What it costs in Weymouth
A new or replacement keypad in Weymouth typically runs $250 to $650 installed, depending on whether it is a standalone unit or integrated into a larger access system.
How we do it
We mount the keypad in a weather-sealed enclosure, wire it to the opener’s control board, program the codes, and test the entry cycle before photographing the final wiring.
Phone Entry
Signs you need it
You want visitors or delivery drivers to call a number from the gate and have you open it remotely, or the current phone entry unit is no longer connecting to the opener reliably.
What it costs in Weymouth
Phone entry system installation in Weymouth usually falls between $600 and $1,500, with the range driven by whether cellular connectivity is required and how many lines the system must handle.
How we do it
We install the phone entry controller, connect it to the gate’s relay or control board, program the call-forwarding numbers, and test the open command from a live call before we leave.
What Gate Access Control Costs in Weymouth
| Item | Typical range in Weymouth |
|---|---|
| Keypad entry (standalone) | $250 - $650 |
| Phone entry system | $600 - $1,500 |
| Card reader or video intercom | $700 - $2,100 |
Can you integrate a keypad with an existing Viking or DoorKing opener?
Yes, we integrate keypads, phone entry, and card readers with Viking, DoorKing, Elite, Ghost Controls, and every other major automation brand we service. Our wiring diagrams are left with you after the job so any future technician can see exactly how it was done.
Is access control worth it on a residential gate in Weymouth?
For many Weymouth homeowners it is. A keypad means you stop handing out remotes, and it means delivery drivers and family members can reach you without a remote in the car. The installed price is written before work starts.
Gate Parts & Welding in Weymouth
Gate parts and welding in Weymouth is the core of what the coastal climate forces on us. Hinges that would last a decade in Quincy or Milton rust through in three winters on Weymouth Neck because of the salt concentration in the air. Posts heave with the frost, pulling the gate out of alignment and shearing the hinge welds. Weymouth also has a lot of original wood and steel frames from the 1950s and 1960s that were never built for automatic openers, so retrofitting a motor often requires welding new brackets and reinforcing the frame. The parts work is covered in full on our Gate Parts & Welding page.
Hinge Replacement
Signs you need it
The gate sags on one corner, the latch no longer lines up with the strike plate, or the hinge pins are visibly rusted and stiff.
What it costs in Weymouth
Hinge replacement in Weymouth runs $150 to $450 per hinge, with stainless or hot-dip galvanized hinges on the upper end and standard zinc on the lower end, which we do not recommend near the water.
How we do it
We cut out the old hinges, weld or bolt in the new stainless set, set the gate in plumb, and photograph the new hardware in place.
Post Replacement
Signs you need it
The post leans visibly, the gate has moved off its latch because the post is shifting, or the base is rusting through at ground level.
What it costs in Weymouth
Post replacement in Weymouth typically runs $500 to $1,100 per post, including setting the new post below the frost line and re-hanging the gate.
How we do it
We dig out the old post and its concrete footing, set the new steel or treated post below the frost line in a new footing, and re-hang the gate to spec.
What Gate Parts & Welding Costs in Weymouth
| Item | Typical range in Weymouth |
|---|---|
| Hinge replacement (per hinge) | $150 - $450 |
| Post replacement (per post) | $500 - $1,100 |
| Custom welding repair (cracked frame, bracket) | $200 - $700 |
Should I just replace zinc hardware with more zinc hardware?
On the coastal side of Weymouth, no. Standard zinc-plated hinges and latches routinely fail in two to three winters. We specify stainless or hot-dip galvanized hardware on any gate within a mile of the water. The price difference is small compared to paying for hinge replacement twice.
Can you weld a cracked gate frame in place?
Yes, if the frame is structurally sound enough to weld safely. We grind the crack, weld it with appropriate rod for the base metal, and coat the repaired area. Every weld is photographed and included in the written job record.
Brands We Service in Weymouth
We service gate motors and openers from Viking, Ghost Controls, DoorKing, and Elite, along with the other major automation brands. We do not steer Weymouth customers toward replacing a working motor just because we do not carry the brand. See the full list on our brands page. Common parts for these openers are stocked locally, which keeps most repairs to a same-day turnaround.
Pricing for Gate Repair in Weymouth, MA
| Service | Typical range in Weymouth |
|---|---|
| Motor repair | $180 - $450 |
| Motor installation | $850 - $2,400 |
| Control board replacement | $350 - $780 |
| Keypad entry | $250 - $650 |
| Phone entry system | $600 - $1,500 |
| Card reader or video intercom | $700 - $2,100 |
| Hinge replacement (per hinge) | $150 - $450 |
| Post replacement (per post) | $500 - $1,100 |
| Custom welding repair | $200 - $700 |
What pushes a Weymouth gate repair to the upper end of a range is usually coastal exposure. Hardware that is rusted through near the Back River or on Weymouth Neck takes longer to cut out and replace than clean hardware inland, and we may specify stainless where another town would reuse what is there. Whatever the range, the price is written and handed to you before any work begins, per Haven Standard Clause 1.
Neighborhoods We Serve in Weymouth
We work across Weymouth, from Weymouth Neck and the Back River streets up through North Weymouth, East Weymouth, South Weymouth, and the newer communities around Union Point. Response for most repairs is same-day or next-day, depending on where the technician is when you call.
- Weymouth Neck
- North Weymouth
- East Weymouth
- South Weymouth
- Union Point
Service Area - Cities Near Weymouth
Vance Gate Repair serves Weymouth and the surrounding South Shore towns. The same written pricing and documented photo record apply in every location. If you are in a neighboring town, you can find the local details on these pages: Braintree, MA, Quincy, MA, Randolph, MA, and Milton, MA.
Serving Weymouth, MA - Our Local Coverage Area
We’re based in the Weymouth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Weymouth
Most gate repairs and like-for-like part replacements do not require a permit in Weymouth. New gate installations and structural work like new posts or footings may need one, and some HOA communities around Union Point have their own architectural review. We can tell you which applies to your project and include any permitting coordination in the written quote.
Most Weymouth calls get same-day or next-day service. We dispatch our technicians based on where they are when the call comes in, not on a fixed daily route. A live person answers at (928) 260-0864 at any hour.
No. The written price accounts for whatever the job requires, and that is the price. Coastal hardware replacement is a bigger job, but the quote is the quote. We never surcharge you for your address after the fact.
If your gate is binding, your opener is fighting itself, or your hinges are rusting through, call Vance Gate Repair at (928) 260-0864. We will come out, name the problem, write the price, and leave you with a photo record of everything we touched. Estimates are free, and no work starts until you have the number in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Weymouth Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.