Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Solon, OH
Most gate repair calls in Solon start with an operator that suddenly quit or a gate that binds halfway through its travel. The homes here, largely built between 1988 and 2008 on half-acre lots, came with automated ornamental aluminum and wrought-iron gates that are now hitting the 20-to-30-year mark together. When a LiftMaster or FAAC motor fails on Aurora Road, it’s rarely just the motor. Frost heave has usually shifted a post, a hinge has worn oblong, or road salt has eaten through a low-voltage splice. Call (928) 260-0864 and we’ll send a technician who documents what’s actually wrong before quoting a written price.
Why Solon Homes Are Different
Solon sits in Northeast Ohio’s freeze-thaw belt, and that single fact drives more gate repair work here than any other variable. Winter ground heaving lifts and resettles gate post footings, often by an inch or less. The post doesn’t crack. The homeowner sees nothing. But the operator motor, now fighting a misaligned track or a hinge that doesn’t close square, throws a fault code and shuts down. A technician who swaps the motor without checking post alignment will be back in six months for the same call.
The housing stock compounds the problem. Solon’s 1990s and 2000s executive home boom produced one of suburban Cleveland’s densest concentrations of automated driveway gates. Those gates are aging simultaneously across neighborhoods off SOM Center Road, Cannon Road, and Aurora Road. Hinges wear out. Weld points rust from decades of road salt tracked in from private driveways. Exposed low-voltage wiring corrodes. And the operators themselves, many original to the home, are at end of life. Solon also has a commercial layer most neighboring suburbs lack: corporate campuses along the SOM Center and Bainbridge corridors run commercial slide gates and access-control systems that need a different kind of service than a residential swing gate.
For the full picture on repair and installation work in Solon, see our dedicated pages. We’re an independently owned gate specialist, not a franchise, and every job starts with a written price.
Our Main Solon Services
Solon homeowners call most often about two things: a gate that stopped working correctly, and a gate they want installed or replaced. Both start with the same documented approach.
Gate Repair in Solon
Repair work in Solon covers operators, hinges, posts, sensors, and welded steel or aluminum. The freeze-thaw cycle means a repair quote has to account for what the technician finds once the gate is cycled and the post is checked for plumb. We photograph the failed part, write the flat price, and do the work the same visit whenever parts are on the truck. Gate Repair in Solon covers the full scope of what we fix and what it costs.
Gate Installation in Solon
New gate installation in Solon is measured work, not same-day work. We measure the opening, check the post foundations for frost heave, confirm the set-back from Aurora Road or Cannon Road driveways, and produce a written scope with a line-item price. Gate Installation in Solon walks through what a full install includes, from post setting to operator programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Solon
Gate motor and opener service in Solon usually means replacing or repairing an operator on a gate that’s 20 to 30 years old, installed when the house was built during the 1988-2008 construction window. The motor fails first and the call comes in as electrical, but a third of the time the real problem is a post shifted by frost heave or a hinge that no longer lets the gate travel cleanly. Our Gate Motor & Opener work covers nine automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair the motor already on the property rather than pushing a replacement. Before any part is ordered, the technician confirms the gate itself moves freely by hand.
Motor Installation
Signs you need it
The operator hums but the gate doesn’t move, the motor runs but trips a breaker, or the gate opens only partway and stops.
What it costs in Solon
Most swing-gate motor installations in Solon run between $850 and $1,900, depending on brand and whether the arm bracket and mounting plate are reusable.
How we do it
We remove the old operator, mount and level the new one, set limit switches, program remotes, and photograph the finished wiring and limit positions for your record.
Motor Repair
Signs you need it
The gate opens but won’t close, the motor runs but the gate moves erratically, or the operator throws a fault code after every cycle.
What it costs in Solon
Motor repairs in Solon typically run between $150 and $550, depending on whether the fault is in the capacitor, limit switch, control board, or gear assembly.
How we do it
We read the fault code, test voltage and resistance at the board, replace the failed component, reset limits, and document the new settings in a photo log.
What Gate Motor & Opener Costs in Solon
| Item | Typical range in Solon |
|---|---|
| Motor installation | $850 - $1,900 |
| Motor repair | $150 - $550 |
| Diagnostic service call | $89 - $140 |
Why did my gate motor stop working after a Solon winter?
Freeze-thaw cycles shift post footings just enough to bind the gate, overloading the motor until it faults. We check post plumb and hinge alignment before condemning the operator. Call (928) 260-0864 to schedule a diagnostic.
Can you replace my gate motor the same day?
Most common operator brands are stocked on our trucks, so same-day replacement is usually possible. If your motor is a less common BFT or Viking model, installation typically happens within two business days.
Gate Access Control in Solon
Access control in Solon splits between residential keypads and phone-entry systems on private driveways, and the commercial slide-gate systems at corporate campuses along SOM Center Road and Bainbridge Road. The residential systems age with the gates themselves, meaning keypads, card readers, and intercom wiring installed in the 1990s and 2000s are now failing at the same rate. Our Gate Access Control service covers keypads, remotes, phone entry, card readers, and video intercoms, wired to work with whatever motor is already on the gate. Salt corrosion on exposed low-voltage wiring is the most common Solon failure point we find.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons don’t respond, or the code stopped accepting after a power surge.
What it costs in Solon
Keypad replacement or wiring repair in Solon typically runs between $225 and $500, including programming and weather sealing.
How we do it
We test the keypad output, trace the wiring to the operator board, replace the unit or splice, program new codes, and photograph the finished connections.
Phone Entry
Signs you need it
Visitors press the call button and nothing rings, the line is staticky, or the relay won’t release the gate after a call connects.
What it costs in Solon
Phone entry repairs in Solon usually run between $300 and $750, depending on whether the issue is the unit, the phone line, or the relay board.
How we do it
We test the phone unit’s output, verify the relay fires at the operator, replace only the failed component, and document the wiring for future service.
What Gate Access Control Costs in Solon
| Item | Typical range in Solon |
|---|---|
| Keypad entry | $225 - $500 |
| Phone entry | $300 - $750 |
| Diagnostic service call | $89 - $140 |
Will a new keypad work with my existing gate motor?
Yes. We wire keypads and phone entry to the operator brand already installed, whether that’s LiftMaster, Linear, FAAC, or another. Call (928) 260-0864 for a written quote before we order parts.
Does Solon require anything special for access control on commercial gates?
Commercial properties generally need a call-box with a listed directory and a Knox-compatible fire entry. We set up the relay wiring and document it so the fire marshal’s inspection goes cleanly.
Gate Parts & Welding in Solon
Parts and welding work in Solon is structural before it’s cosmetic. Road salt, freeze-thaw movement, and 20-plus years of daily cycles have taken a toll on hinges, posts, rails, and weld points across the city’s ornamental aluminum and wrought-iron gates. Our Gate Parts & Welding service covers hinge replacement, post replacement, rail repair, custom welding, and gate rollers. The most common Solon-specific call is a post shifted inward by frost heave, enough to bind the gate but visually invisible. We realign or reset the post, then weld the hinge back square.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the latch side, or the hinge pin shows visible wear and ovaling.
What it costs in Solon
Hinge replacement on a Solon driveway gate typically runs between $300 and $800, depending on gate weight and whether welding is required.
How we do it
We support the gate, remove the old hinge, grind the mounting surface clean, weld or bolt the new hinge, and photograph the finished alignment.
Post Replacement
Signs you need it
The post leans visibly, the gate binds mid-travel, or the operator throws a fault code after every freeze-thaw cycle.
What it costs in Solon
Post replacement in Solon usually runs between $700 and $2,200, depending on depth, concrete work, and whether the operator wiring runs through the post.
How we do it
We dig out the old footing, set a new post in concrete below frost line, re-hang the gate, and realign the operator before documenting the job.
What Gate Parts & Welding Costs in Solon
| Item | Typical range in Solon |
|---|---|
| Hinge replacement | $300 - $800 |
| Post replacement | $700 - $2,200 |
| Diagnostic service call | $89 - $140 |
Can you weld aluminum driveway gates?
Yes. We tig-weld aluminum and mig-weld steel, then grind and finish to match the surrounding surface. Call (928) 260-0864 for a written price after we see the break.
Why does my gate bind after winter even though the post looks straight?
Frost heave shifts the footing by an inch or less, enough to misalign the hinges and overload the operator. We check plumb with a level, not by eye, then correct the footing.
Brands We Service in Solon
We service BFT, Linear, Viking, and Ghost Controls operators, plus five other major automation brands. Common boards, capacitors, limit switches, and remotes are stocked on our trucks for same-visit repairs. For the full list, see our brands. We repair whatever motor is already on your property rather than steering you toward a replacement.
Pricing for Gate Repair in Solon, OH
| Service | Typical range in Solon |
|---|---|
| Diagnostic service call | $89 - $140 |
| Motor installation | $850 - $1,900 |
| Motor repair | $150 - $550 |
| Keypad entry | $225 - $500 |
| Phone entry | $300 - $750 |
| Hinge replacement | $300 - $800 |
| Post replacement | $700 - $2,200 |
| Gate roller replacement | $150 - $450 |
| Custom welding (per hour) | $95 - $180 |
In Solon, the biggest price variables are post condition after freeze-thaw cycles and whether the wiring run needs replacement due to salt corrosion. Every quote is written and handed to you before any work starts, under Haven Standard Clause 1. You’ll never see an invoice higher than the number you approved.
Neighborhoods We Serve in Solon
We work throughout Solon, from the cul-de-sac subdivisions off Aurora Road to the larger lots near Cannon Road and SOM Center Road. Typical response time for repair calls in Solon is under 24 hours, with same-day dispatch available for failed operators and stuck gates.
- Aurora Road corridor subdivisions
- Cannon Road and SOM Center Road neighborhoods
- Corporate campus gates along Bainbridge Road
- Liberty Road and Pettibone Road areas
- Solon Village and surrounding streets
Service Area - Cities Near Solon
Vance Gate Repair dispatches to Solon from our Cleveland office, with crews serving the surrounding communities as well. We handle gate repair work in Maple Heights, OH, Hudson, OH, Cleveland, OH, and Euclid, OH.
Serving Solon, OH - Our Local Coverage Area
We’re based in the Solon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Solon
Most repair calls in Solon are dispatched the same day or within 24 hours. A live person answers (928) 260-0864 at any hour, including weekends and holidays, and can tell you the next available window.
Some Solon subdivisions have architectural review requirements for new gate installations. Repairs to existing gates rarely need approval. We can provide written documentation and photos of the proposed work if your HOA asks.
Yes. That’s Haven Standard Clause 1. The technician writes the flat price and scope on paper before any tool comes out. You approve it, then we start. There is no open-ended hourly billing and no surprise invoice.
Contact Vance Gate Repair in Solon
If your gate is binding, your operator is faulting, or you need a written quote for any gate repair in Solon, call (928) 260-0864. A live person answers, we schedule a technician, and you get a written price before any work begins. Free estimates, documented photo records on every visit, and the 365-Day Done Right Promise on all completed work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Solon Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.