Question 1

How quickly can you respond to a gate emergency in Plano?

Accepted Answer

Most Plano emergency calls get a same-day visit to diagnose the problem and often to fix it on the spot. We dispatch from the Dallas-Fort Worth office with technicians already routed through Plano, so your wait depends more on distance than on a call queue. A live person answers 24/7 at (928) 260-0864.

Question 2

Do I need HOA approval for gate repair or replacement in Plano?

Accepted Answer

Many Plano HOAs require approval for visible changes to driveway gates, especially in planned communities with architectural review boards. We provide the photographic documentation and written scope most HOAs ask for, which usually speeds the approval along. Check your community's specific requirements before scheduling.

Question 3

Will you match or review a written quote from another Plano gate company?

Accepted Answer

We'll review any written estimate from another company at no cost and give you a second opinion in writing. Bring the paperwork to the visit or send it ahead, and we'll point out what it covers, what it leaves out, and what we'd charge for the same scope. If your gate isn't working right in Plano, call (928) 260-0864. We'll give you a written price before any work begins, and every job comes with a documented photo record of what was found and what was left behind.

Question 4

Motor Installation Signs you need it The motor hums and trips its breaker, or the gate won't budge even though the keypad and remote both beep as if they're working. What it costs in Plano Most full motor installations in Plano run between $575 and $1,385 depending on the operator type and the condition of the existing post and arm bracket. How we do it We remove the old operator, verify the gate's swing or slide alignment and post condition, mount the new motor, set travel limits and force settings, test the safety edges and photo-eyes, then hand you a written part number and photo record before we leave. Motor Repair Signs you need it The gate starts and stops mid-travel, opens on a delay, or makes a grinding sound when the motor engages. What it costs in Plano Motor repairs in Plano typically land between $349 and $3,985; smaller fixes like gear or capacitor work sit at the low end while a full operator replacement tops the range. How we do it We inspect the gear assembly, capacitor, control board, and wiring connections, identify the failed component, quote the repair in writing before work starts, replace only what's actually broken, and photograph the finished repair with the new parts labeled. Linear Motor Signs you need it The gate stutters at the start of travel, makes a ratcheting noise, or loses its open/close limits every few weeks regardless of how often you reprogram it. What it costs in Plano Linear motor work in Plano runs between $349 and $3,985 depending on whether the arm, the gearbox, or the whole operator needs replacing. How we do it We test the arm's screw-and-gear mechanism, check for stripped travel nuts, measure the post for drift using a level, reset or replace the arm, and re-calibrate the limits to the gate's actual stopped position. Slide Motor Signs you need it The gate stops short of its end stops, grinds against the chain, or sits a few inches off the closed sensor no matter how many times the limit is adjusted. What it costs in Plano Slide motor replacement in Plano ranges from $349 to $3,985 depending on the operator's horsepower and whether the chain, wheels, or track also need service in the same visit. How we do it We check the track and wheel condition first because a binding wheel on Plano's shifting clay can mimic a motor failure, then repair or replace the motor, set the chain tension, align the limits, and test the full cycle with safety edges active. Intercom Integration Signs you need it Callers at the gate can't be heard or can't trigger the gate, or your existing call box isn't wired to open the gate from the house. What it costs in Plano Intercom integration with an existing motor usually falls between $575 and $1,385 depending on the wiring distance and whether a relay is already present. How we do it We run the signal path from the call box to the gate board, install a dry-contact relay or wire the trigger circuit, program the unlock output, and test both the voice path and the gate activation from the house. What Gate Motor & Opener Costs in Plano Item Typical range in Plano Motor installation $575 u2013 $1,385 Motor repair $349 u2013 $3,985 Intercom integration $575 u2013 $1,385 Can you fix a dead Viking or Ghost Controls opener in Plano the same day?

Accepted Answer

Yes, in most cases. We carry common Viking and Ghost Controls parts and can often replace a capacitor, a gear, or a limit switch the same day we diagnose it. If the board is the discontinued type common on late-1990s Plano gates, a full operator swap may be the only correct fix, and we'll quote that in writing on the spot. Call (928) 260-0864 to get a technician headed your way.

Question 5

Why does my Plano gate opener keep losing its limits every few months?

Accepted Answer

The clay soil under your gate posts is moving, not the opener itself. When a post shifts even slightly, the opener's stored travel limits no longer match reality. We fix the root cause by re-setting the post or adjusting the arm, then we recalibrate and photograph the new limit positions so you have a baseline. Call (928) 260-0864 for a written estimate.

Question 6

Keypad Entry Signs you need it The keypad beeps but the gate doesn't open, you have to press buttons twice or unusually hard, or the backlit display has gone dim or blank. What it costs in Plano Keypad replacement in Plano typically runs $175 to $475. How we do it We test voltage at the keypad, replace the unit or the wiring as needed, program new and existing codes, and photograph the programming settings so you have a record of what's installed. Remote Control Signs you need it The remote opens the gate intermittently or only from close range, the LED lights but the gate doesn't move, or you've programmed a new remote and it won't take. What it costs in Plano Remote control service in Plano runs $175 to $475 depending on whether the remote needs reprogramming or the receiver board inside the operator needs replacement. How we do it We identify the frequency and protocol of your operator, test the receiver, program the remote to the board, and if the receiver is dead we replace it with one matched to your existing remote. Phone Entry Signs you need it Callers can't reach the house when they press the call button, the gate won't open when you hang up, or the system rings endlessly without connecting. What it costs in Plano Phone entry system replacement in Plano falls between $575 and $1,385. How we do it We check the phone line or cellular module, test the relay that triggers the gate, replace the entry unit or the communication module, and program the forwarding number and access code on site. Card Reader Signs you need it Cards work sporadically, only work when swiped at a certain angle, or the reader beeps but doesn't release the gate latch. What it costs in Plano Card reader installation in Plano typically runs $175 to $475. How we do it We check reader voltage and communication, replace the reader or the wiring, program existing card formats, and test the release function against the gate operator. Video Intercom Signs you need it The video feed is blank or frozen, audio is one-way, or the outdoor station no longer triggers the gate release when answered inside. What it costs in Plano Video intercom installation in Plano runs $575 to $1,385. How we do it We test the camera, audio, and relay paths, replace the outdoor station or indoor monitor as needed, run the wiring or configure the network, and verify video, audio, and gate activation all work together. What Gate Access Control Costs in Plano Item Typical range in Plano Keypad entry $175 u2013 $475 Remote control $175 u2013 $475 Phone entry system $575 u2013 $1,385 Video intercom $575 u2013 $1,385 Can you add a phone entry system to my existing gate opener in Plano, or do I need a new motor?

Accepted Answer

No new motor needed. Phone entry integrates with whatever operator is already on the property through a relay circuit. We wire the call box to the gate board, configure the access code, test the call path, and leave you with the wiring diagram. Call (928) 260-0864 for a written quote.

Question 7

My Plano gate keypad stopped working after a storm. Is that common?

Accepted Answer

Yes. Spring storms and the wet/dry clay cycle both stress outdoor equipment in Plano. Water intrusion in keypads is common on older units, and power surges can fry the internal relays. We test voltage, dry out or replace the unit, and seal the new installation against the next storm. Call (928) 260-0864 to schedule.

Question 8

Hinge Replacement Signs you need it The gate sags, scrapes the ground at the latch end, or you can see visible play at the hinge when you push on the gate. What it costs in Plano Hinge replacement in Plano runs $349 to $2,995 depending on the hinge type and whether the post also needs reinforcement. How we do it We support the gate, cut or unbolt the old hinges, align and weld or bolt the new ones, and photograph the finished hinge before re-hanging the gate and checking its full travel path. Post Replacement Signs you need it The post visibly leans, the gate drags or won't latch, or you find fresh cracks in the concrete at the base of the post. What it costs in Plano Post replacement in Plano lands between $575 and $2,450 depending on post size, depth, and the condition of the surrounding concrete. How we do it We cut the old post at the base, dig out the failed concrete, set a new post deeper with proper drainage and concrete collars sized for Plano's clay, and verify plumb with a level before re-hanging the gate. Rail Repair Signs you need it The gate sticks in the middle of travel, the rail has visible bends or breaks, or the gate rattles and jumps as it moves along the rail. What it costs in Plano Rail repair in Plano runs $175 to $475 depending on the length of rail and whether it needs a straighten-and-weld or a full section replacement. How we do it We inspect the rail for bends and breaks, straighten what's recoverable, weld broken sections or replace lengths of rail, and test the gate's movement with no binding or noise. Custom Welding Signs you need it Pickets are cracked or missing, the frame is separating at a corner, or you need a gate modified to fit a new opening or a new operator. What it costs in Plano Custom welding work in Plano typically runs $349 to $630 depending on the scope and the material. How we do it We grind the area, weld with materials matched to the gate's original metal, grind and finish the joints, and photograph the completed weld from multiple angles. Gate Rollers Signs you need it The gate jerks or catches as it rolls, you hear a scraping sound at the bottom, or the wheels look flattened on one side. What it costs in Plano Gate roller replacement in Plano runs $175 to $475 depending on the roller type and how many need replacing. How we do it We inspect wheel condition, bearing play, and track alignment, replace the rollers with units matched to your gate's weight, and run the gate through a full cycle to confirm smooth movement. What Gate Parts & Welding Costs in Plano Item Typical range in Plano Hinge replacement $349 u2013 $2,995 Post replacement $575 u2013 $2,450 Rail repair $175 u2013 $475 Custom welding $349 u2013 $630 Gate rollers $175 u2013 $475 Can you weld a broken wrought-iron gate in Plano, or does it always need replacement?

Accepted Answer

Most broken wrought-iron gates can be welded, especially when the damage is at hinges, pickets, or frame corners. Replacement is the right call only when corrosion has thinned the metal enough that welding would just move the failure point. We'll show you the condition and quote either path in writing. Call (928) 260-0864.

Question 9

How fast can you replace a leaning gate post in Plano clay?

Accepted Answer

Usually in one visit. We cut the failed post, set a new one with concrete sized for shrink-swell soil, check plumb, and re-hang the gate the same day. The concrete gets full cure time before we retension and recalibrate the operator. Call (928) 260-0864 for a written estimate.

Item	Typical range in Plano
Motor installation	$575 - $1,385
Motor repair	$349 - $3,985
Intercom integration	$575 - $1,385

Item	Typical range in Plano
Keypad entry	$175 - $475
Remote control	$175 - $475
Phone entry system	$575 - $1,385
Video intercom	$575 - $1,385

Item	Typical range in Plano
Hinge replacement	$349 - $2,995
Post replacement	$575 - $2,450
Rail repair	$175 - $475
Custom welding	$349 - $630
Gate rollers	$175 - $475

Gate Repair in Plano - Fixed Today, No Surprise Invoice

Gate Repair in Plano, TX

Why Plano Homes Are Different

Our Main Plano Services