Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Paradise, NV
Gate motor and opener repair in Paradise usually runs between $240 and $680 depending on the motor type and what failed. Most calls we take here come from swing gates on 1960s and 1970s ranch homes or slide gates on condo complexes built near the Strip. Call (928) 260-0864 and a live person answers, any hour.
Why Paradise Homes Are Different
Paradise is unincorporated Clark County land that happens to contain the Las Vegas Strip. That means our technicians work the same day on a homeowner’s wrought-iron swing gate in Paradise Palms and the next day on a slide-gate operator at a condo complex off Twain, where the gate might cycle 300 times before noon between residents, delivery drivers, and short-term rental traffic. The 24/7 economy here means gate hardware simply wears faster than in Henderson or North Las Vegas.
Heat is the second factor. Summer air temperatures above 115°F cause steel gates to expand and bind against their posts, which overloads the operator. A gate that swings freely in January can drag in July. UV radiation also bakes wiring insulation and loop-detector sleeves, and the fine desert silt that blows through Paradise works its way into motor housings and track rollers. Sealed bearings and regular lubrication are not optional maintenance here; they are what keeps a gate from failing on the one day you cannot wait for a technician.
Our Main Paradise Services
Two jobs dominate our calls in Paradise: repairing what is already there, and replacing gates that have reached the end of their service life. Each has its own page with full detail.
Gate Repair in Paradise
Most repair calls in Paradise involve a gate that has stopped mid-travel, a motor that hums but will not move the leaf, or a weld that has cracked at the hinge. On the older ranch homes in neighborhoods like Paradise Palms, we often find worn pintles and deteriorated welds on ornamental iron gates that were installed when the house was built. On newer condo and apartment complexes near the Strip, the problems are usually with slide-gate rollers and chain drives that see heavy daily cycles. A technician names what was found, hands over a written price, and does not start until you approve it. Full details are on the Gate Repair in Paradise page.
Gate Installation in Paradise
New gate installations in Paradise have to account for two things: the heat, and the HOA. Steel gates need gaps wide enough for summer expansion, which means the installer has to understand how this climate moves metal. And many Paradise neighborhoods, especially the condo communities and the HOAs around the Strip, have design standards you must meet before any post goes in the ground. We handle the measure, the written quote, and the full installation. See Gate Installation in Paradise for what a new gate project involves and what it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Paradise
Gate motor and opener work in Paradise means dealing with swing-gate operators on 1960s and 1970s ranch homes where the original arm brackets were never meant to handle summer expansion, and slide-gate operators on Strip-adjacent condo complexes that run around the clock. The operator is the part that takes the most abuse in this climate, and it is the part most likely to fail without warning. Our Gate Motor & Opener service covers every motor already on the property, whether it is a Viking, Ghost Controls, DoorKing, or Elite.
Motor Installation
Signs you need it
The motor runs but the gate barely moves, or the motor is over 10 years old and replacement parts are no longer available.
What it costs in Paradise
Motor replacement in Paradise typically runs $480-$1,400, depending on brand and whether the arm bracket is still solid.
How we do it
We remove the old operator, install the new motor on the existing bracket or a new one, set the limit switches, and hand you a written record of the part number and the photographed final position.
Linear Motor
Signs you need it
The gate jolts when it starts moving, or the arm has popped off its bracket during a heat wave.
What it costs in Paradise
Linear motor replacement or linkage repair in Paradise runs $300-$800, depending on the stroke needed and the bracket condition.
How we do it
We measure the stroke, replace the motor or the linkage hardware, and reset the open and close limits so the gate never over-travels in either direction.
Slide Motor
Signs you need it
The gate stops halfway and the motor keeps humming, or the chain has begun to skip teeth on the drive sprocket.
What it costs in Paradise
Slide motor replacement in Paradise runs $500-$1,300, depending on horsepower and the condition of the rack or chain.
How we do it
We replace the motor and the worn drive components, then set the limit switches and photo-eye alignment so the gate reverses correctly on obstruction.
Intercom Integration
Signs you need it
Callers at the gate cannot be heard clearly, or the gate will not open from the house when someone presses the call button.
What it costs in Paradise
Integrating a gate motor with an intercom or phone entry system in Paradise runs $200-$600, depending on the existing wiring and hardware.
How we do it
We identify the relay output on the intercom, wire it to the operator input, and test the open command from both the handset and the entry panel before we leave.
What Gate Motor & Opener Costs in Paradise
| Item | Typical range in Paradise |
|---|---|
| Motor repair (arm, gear, limit switch) | $240-$680 |
| Motor replacement | $480-$1,400 |
| Slide or linear motor replacement | $500-$1,300 |
How fast can you fix a gate motor in Paradise?
Same day in most cases. We carry common motors and parts locally, and a technician already working in Paradise can usually reach you within a few hours. Call (928) 260-0864 for a live answer.
Will you work on my existing motor, or will you push a replacement?
We repair first. We service nine major brands, including Viking, Ghost Controls, DoorKing, and Elite, and we only recommend replacement when the repair cost exceeds the motor’s remaining value or parts are discontinued.
Gate Access Control in Paradise
Access control in Paradise is not optional for most properties. Condo complexes near the Strip need keypad and phone entry systems that work every single time, and homeowners in older ranch neighborhoods want remote controls and card readers that do not fail when the summer heat hits. Our Gate Access Control service covers the electronics that decide who gets in, and we document every setting we change with photographs.
Keypad Entry
Signs you need it
The keypad works intermittently, or some codes work while others stopped working after a power surge.
What it costs in Paradise
Keypad replacement or reprogramming in Paradise runs $180-$450, depending on the keypad model and whether new wiring is needed.
How we do it
We replace or rewire the keypad, program the codes, and photograph the final wiring so the next technician can see exactly what was changed.
Phone Entry
Signs you need it
Guests press call and the call never rings your phone, or you can hear them but pressing 9 no longer opens the gate.
What it costs in Paradise
Phone entry system repair or replacement in Paradise runs $250-$650, depending on whether the unit is standalone or tied to a larger access system.
How we do it
We test the relay output, the phone line or cellular connection, and the power supply, then replace only what failed and retest the full call-to-open sequence.
Card Reader
Signs you need it
Some cards work and others do not, or the reader beeps but the gate will not open.
What it costs in Paradise
Card reader installation or replacement in Paradise runs $220-$550, depending on the reader type and the cable run back to the controller.
How we do it
We verify the reader format, replace the unit or the damaged cable segment, and test with a known-good card before commissioning.
What Gate Access Control Costs in Paradise
| Item | Typical range in Paradise |
|---|---|
| Keypad entry (install or repair) | $180-$450 |
| Phone entry system | $250-$650 |
| Card reader or video intercom | $220-$550 |
Do you handle access control for HOAs in Paradise?
Yes. We work with condo boards and property managers across Paradise, including communities near the Strip that need reliable phone entry and card access around the clock. We provide a written quote for the board to approve before any work begins.
Can you integrate access control with my existing gate motor?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we wire the access control to whichever motor is already on the property. Call (928) 260-0864 for a written estimate.
Gate Parts & Welding in Paradise
Parts and welding work in Paradise usually means repairing ornamental iron gates on 1960s and 1970s ranch homes where the welds and pintles are original, and the heat has done its work on the steel. We also see the opposite problem on newer condo complexes: slide-gate rollers and tracks worn out by volume. Gate Parts & Welding keeps the gate you have running instead of selling you a gate you do not need.
Hinge Replacement
Signs you need it
The gate sags visibly, the latch no longer lines up with the strike plate, or the gate scrapes the ground on one side.
What it costs in Paradise
Hinge or pintle replacement in Paradise runs $120-$350, depending on gate weight and how much grinding is needed to remove the old weld.
How we do it
We support the gate, grind off the old hinge, weld the new one in place, and photograph the finished weld and the gate position.
Post Replacement
Signs you need it
The post leans, the gate can no longer close, or the post base shows rust through to the concrete footing.
What it costs in Paradise
Post replacement in Paradise runs $300-$900, depending on the post size, the depth of the footing, and whether concrete demolition is required.
How we do it
We remove the failed post, set a new one in concrete, plumb it, and re-hang the gate so it swings without binding.
Custom Welding
Signs you need it
A cracked weld at the frame corner, a broken finial or picket, or a design change you want made to the existing gate.
What it costs in Paradise
Custom welding or crack repair in Paradise runs $150-$500, depending on the length of the weld and the finish work required.
How we do it
We grind the surface clean, weld the crack or the new section, and apply a finish that matches the surrounding metal as closely as possible.
Gate Rollers
Signs you need it
The gate drags, screeches, or the wheel has worn flat on one side from fine desert grit in the track.
What it costs in Paradise
Roller replacement for slide gates in Paradise runs $100-$300 per roller, including the sealed bearing hardware.
How we do it
We lift the gate off the track, swap the worn roller for a sealed-bearing unit, and adjust all rollers so the gate travels evenly.
What Gate Parts & Welding Costs in Paradise
| Item | Typical range in Paradise |
|---|---|
| Hinge or pintle replacement | $120-$350 |
| Post replacement | $300-$900 |
| Custom welding or crack repair | $150-$500 |
Do you weld ornamental iron gates in Paradise?
Yes. We work on the wrought-iron and ornamental steel gates common in Paradise Palms and other older Paradise neighborhoods. The quote comes in writing before any grinding or welding starts.
Can you repair a gate that has rusted through at the post?
Usually yes. The answer depends on how much steel is left around the hinge point. We assess the corrosion, photograph what we find, and give you a written price for either a repair or a post replacement before any work begins.
Brands We Service in Paradise
We service nine major gate-automation brands, including Viking, Ghost Controls, DoorKing, and Elite. Common motors and parts are stocked locally, so most Paradise jobs do not wait on a shipment. See our brands for the full list.
Pricing for Gate Repair in Paradise, NV
| Service | Typical range in Paradise |
|---|---|
| Gate motor repair | $240-$680 |
| Motor replacement | $480-$1,400 |
| Linear motor repair or replacement | $300-$800 |
| Slide motor replacement | $500-$1,300 |
| Intercom integration with gate motor | $200-$600 |
| Keypad entry repair or replacement | $180-$450 |
| Phone entry system repair or replacement | $250-$650 |
| Card reader installation or replacement | $220-$550 |
| Hinge or pintle replacement | $120-$350 |
| Post replacement | $300-$900 |
| Custom welding or crack repair | $150-$500 |
| Gate roller replacement (per roller) | $100-$300 |
Prices in Paradise run higher when the summer heat has caused a steel gate to bind and the operator has to be reset after the mechanical repair is done. Every job gets a written price before work starts, under Haven Standard Clause 1, so you approve the number before anyone picks up a tool.
Neighborhoods We Serve in Paradise
We work across the entire Paradise area, from the older ranch neighborhoods to the newer condo communities near the Strip. Most of the time a technician already in the area can reach you the same day.
- Paradise Palms
- Winchester
- University District
- Hughes Center area
- Strip-adjacent condo communities
Service Area - Cities Near Paradise
Our Paradise crews also dispatch into the surrounding metro. See our pages for Las Vegas, NV, Henderson, NV, North Las Vegas, NV, and Sunrise Manor, NV for local details in each area.
Serving Paradise, NV - Our Local Coverage Area
We’re based in the Paradise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paradise
Same day in most cases. We dispatch from Las Vegas and keep technicians working in Paradise consistently throughout the week. Emergency calls are answered live 24/7 and a technician is typically on site within hours, not days.
Many Paradise HOAs require design approval before any visible gate work. We provide the written quote and the spec sheet you can submit to your board, and we coordinate with property managers on condo and apartment complexes when needed.
No. Estimates are free, and the price you get is in writing before any work begins. Call (928) 260-0864 and a live person will schedule the visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paradise Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.