Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Miami, FL
Gate motor and opener failures account for most of the gate repair calls we make across Miami. The salt air off Biscayne Bay and the Atlantic chews through circuit boards and limit switches far faster than inland Florida, and the heavy wrought-iron gates common in neighborhoods from Coral Gables to Pinecrest put real strain on operator arms and gears. If your gate is stuck, grinding, or only opens halfway, call (928) 260-0864 and we’ll send a technician with a written price before any work starts.
Why Miami Homes Are Different
Miami sits between Biscayne Bay and the Atlantic, which means almost every property here is bathed in salt-laden air. Steel hinges, springs, and operator circuit boards corrode years faster than in Tampa or Orlando. In oceanfront ZIP codes like 33139 and 33149, a steel hinge can oxidize to failure in under three years without marine-grade treatment. We routinely replace hardware in Miami that would have lasted another decade in a drier market.
On top of the salt, Miami-Dade enforces the post-Hurricane Andrew High-Velocity Hurricane Zone code. Residential gates often need documented wind-load ratings, and unpermitted structures get flagged by inspectors. Most of the homes we work on are 1960s to 1980s concrete block and stucco behind perimeter walls topped with wrought iron or tubular aluminum, a reflection of the Latin American reja tradition. Upscale enclaves like Coconut Grove add 1920s Mediterranean Revival estates with heavy custom swing gates that need specialty pivot hardware you won’t find at a standard supplier.
Our Main Miami Services
Most Miami homeowners call us for one of two things: a gate that won’t open, or a new gate that will actually survive hurricane season. Here’s how each works locally.
Gate Repair in Miami
When a gate stops mid-swing or grinds against its track, the problem is almost always mechanical: a bent hinge, a corroded roller, a misaligned photo-eye. In Miami, salt exposure accelerates every one of those failures. We diagnose on site, write the price down, and fix it with parts rated for coastal conditions. Learn more about Gate Repair in Miami.
Gate Installation in Miami
New gates in Miami have to meet wind-load requirements that many out-of-town installers never check. We measure the opening, confirm the post footers, order the gate built to spec, and document every step. The written price covers the full job before we start. See what’s involved in Gate Installation in Miami.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Miami
Gate motors in Miami fail in predictable ways: salt corrosion on the control board, UV-baked wiring, and gearboxes ground down by heavy ornamental gates. Most homes we service were built between 1960 and 1985, and their original operators were never designed for 70% humidity and constant salt mist. When we open a Gate Motor & Opener housing in Miami, the first thing we document is what the salt has done to the terminals and limit switches.
Motor Replacement
Signs you need it
The gate hums but doesn’t move, moves in one direction only, or trips its breaker repeatedly.
What it costs in Miami
Swing-gate motor replacements in Miami typically run between $800 and $1,500, while slide-gate motors run $900 to $1,800 depending on brand and whether the arm bracket is intact.
How we do it
We pull the old unit, photograph the wiring, install the new motor, set the limit switches, and leave you a written record of the part number.
Motor Repair
Signs you need it
The gate opens slower than it used to, stops partway, or reverses without anything in its path.
What it costs in Miami
Most motor repairs in Miami fall between $225 and $450, covering capacitor replacement, limit-switch reset, and wiring fixes on LiftMaster, FAAC, BFT, Linear, and Viking units.
How we do it
We test the board, replace the failed component rather than the whole unit, and photograph the new settings before we leave.
What Gate Motor & Opener Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Swing-gate motor replacement | $800 - $1,500 |
| Slide-gate motor replacement | $900 - $1,800 |
| Motor repair | $225 - $450 |
How long does a gate motor last in Miami’s salt air?
A well-maintained operator lasts 5 to 7 years in Miami’s coastal zones, versus 10 to 12 inland. Marine-grade enclosures and annual limit-switch cleaning extend that. Call (928) 260-0864 for a corrosion check.
Can you repair my existing motor instead of replacing it?
Most of the time, yes. About 70% of the Miami motor failures we see are repairable: capacitors, limit switches, or relay boards. We quote the repair price in writing before starting work.
Gate Access Control in Miami
Miami homeowners are adding keypads, phone entry, and video intercoms to gates that were built for a simple remote. The local reality is that salt spray corrodes keypad membranes and card readers faster than anywhere else in the state, and the post-Andrew code means any new wiring must be run through sealed conduit. Our Gate Access Control work in Miami always starts with a close look at how the existing wiring has survived the salt.
Keypad Entry
Signs you need it
Some keys won’t respond, the faceplate is UV-cracked, or moisture has gotten behind the membrane.
What it costs in Miami
Keypad entry installation in Miami runs $350 to $700, while replacing a corroded keypad on an existing system runs $180 to $350.
How we do it
We mount a sealed, weather-rated keypad, run the wiring through conduit, program the codes, and hand you a photo record of the install.
Video Intercom
Signs you need it
Your intercom audio crackles, the camera feed is fogged from humidity, or the monitor inside won’t ring.
What it costs in Miami
Video intercom installation in Miami runs $700 to $1,400, and replacing a failed monitor or camera unit runs $250 to $600.
How we do it
We verify the wiring path, install the camera and monitor, set up the call function, and test the video with you at the gate.
What Gate Access Control Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Keypad entry installation | $350 - $700 |
| Video intercom installation | $700 - $1,400 |
| Access control service call | $100 - $200 |
Will a new keypad work with my existing gate motor?
Almost always. We wire keypads and intercoms to LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. The written quote confirms compatibility before we start.
Do you run the power and wiring for access control?
Yes. In Miami we run low-voltage wiring through sealed conduit to meet hurricane-zone code, and the power run is included in the written price before work begins.
Gate Parts & Welding in Miami
Wrought-iron gates in Miami carry more than their own weight. Decades of salt, humidity, and seasonal storm gusts stress the hinges, posts, and rails until something gives. Our Gate Parts & Welding crew repairs what’s failed and reinforces what’s about to, using marine-grade stainless hardware that won’t rust out in three years the way the original steel did.
Hinge Replacement
Signs you need it
The gate sags, drags on the ground, or the hinge shows orange rust streaking down the post.
What it costs in Miami
Hinge replacement in Miami runs $150 to $350 per hinge, including cutting out the old hardware and welding in marine-grade stainless.
How we do it
We support the gate, cut out the corroded hinge, weld in the new one, and photograph the finished weld.
Rail Repair
Signs you need it
The slide gate jumps the track, scrapes against the rail, or the rail shows deep rust pitting.
What it costs in Miami
Rail repair in Miami runs $200 to $450 for straightening and welding, and $500 to $1,000 if the rail needs full replacement.
How we do it
We straighten or cut out the damaged section, weld in new rail, realign the gate, and test it through a full travel cycle.
What Gate Parts & Welding Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Hinge replacement | $150 - $350 per hinge |
| Rail repair or replacement | $200 - $1,000 |
| Gate wheel replacement | $100 - $250 per wheel |
Can you weld a broken gate leaf back together in Miami?
Yes, so long as the metal around the break is sound. If the area around the break is rust-thinned, we’ll recommend replacing that section rather than welding onto oxidized steel. Call (928) 260-0864 and we’ll assess it on site.
Do you use stainless hardware on Miami gates?
We use marine-grade stainless for hinges and fasteners on any gate within two miles of the coast. It costs more up front, but it survives the salt instead of failing in three years.
Brands We Service in Miami
We work on most gate automation brands already installed in Miami, including BFT, Linear, Viking, and Ghost Controls. We keep common boards, capacitors, and limit switches stocked in the South Florida office so a repair call doesn’t wait on a part from out of state. See our brands for the full list.
Pricing for Gate Repair in Miami, FL
| Service | Typical range in Miami |
|---|---|
| Swing-gate motor replacement | $800 - $1,500 |
| Slide-gate motor replacement | $900 - $1,800 |
| Motor repair | $225 - $450 |
| Keypad entry installation | $350 - $700 |
| Video intercom installation | $700 - $1,400 |
| Access control service call | $100 - $200 |
| Hinge replacement | $150 - $350 per hinge |
| Rail repair or replacement | $200 - $1,000 |
| Gate wheel replacement | $100 - $250 per wheel |
Coastal proximity pushes materials up in Miami: marine-grade stainless and sealed enclosures cost more than standard parts, and homes in oceanfront ZIP codes often need that upgrade to pass inspection. The price we hand you before work starts is the price you pay. It’s in writing, and it doesn’t change mid-job.
Neighborhoods We Serve in Miami
We run gate repair, motor, access control, and welding crews across the Miami metro every day. If you’re within the city’s service area, a technician can usually reach you the same day you call.
- Coral Gables
- Pinecrest
- Coconut Grove
- Doral
- Kendall
Service Area - Cities Near Miami
Our Miami crews also cover the surrounding cities. If your gate is down in Miami Beach, FL, Coral Gables, FL, Hialeah, FL, or Miami Gardens, FL, the same team handles the call. Same written pricing, same photo record on every visit.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Miami
We dispatch from the South Florida office and can usually reach most Miami neighborhoods the same day you call, especially during daylight hours. For storm damage or a gate that won’t close, call (928) 260-0864 and a live person will give you a straight answer on timing.
Most repairs don’t require a permit, but Miami-Dade’s High-Velocity Hurricane Zone code can require engineering documentation if the gate structure is replaced or modified. We flag that before work starts and handle the paperwork if it’s needed.
Yes. If a hinge, rail, or welded section needs replacement, we match the material and finish to the existing gate so the repair doesn’t stand out. For custom work, we photograph the gate and fabricate the part to match.
Call (928) 260-0864 for a free, written estimate on any gate repair in Miami. A live person answers, and the price you get before work starts is the price you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.