Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lexington, MA
Most calls we take from Lexington start with a gate motor that hums but won’t move, a keypad that stopped recognizing a code, or a hinge that’s pulling out of a fieldstone pillar. Lexington’s mix of pre-Revolutionary colonials, 1960s split-levels, and estate properties along Marrett Road and Waltham Street means we see a wider range of gate hardware than almost anywhere else in Middlesex County. Add Massachusetts’s 48-inch frost depth and clay-heavy till, and you get post heave every spring that no amount of motor adjustment can fix. Call (928) 260-0864 and a live person picks up, any hour.
Why Lexington Homes Are Different
Lexington’s Historic Districts Commission reviews visible alterations in protected zones around the Battle Green and historic corridors, which means replacing an ornamental gate often triggers approval that repairing it does not. That regulatory reality has created a strong local preference for restoration over replacement. The housing stock itself compounds the challenge: 18th-century center-entry colonials near the center, a belt of 1950s-1970s garrisons and split-levels in East Lexington, and large estate lots where iron and aluminum gates are bolted directly into dry-stack or mortared fieldstone walls. When mortar crumbles around hinge anchors, accelerated by salt spray from Mass Ave winter road treatment, the pillar must be repointed before any rehang will hold. That’s a two-trade job, and it surprises homeowners who expected a simple hinge swap.
Our Main Lexington Services
The two services Lexington homeowners call about most are gate repair and gate installation. Each has its own dedicated page with the full scope, local conditions, and pricing detail.
Gate Repair in Lexington
Repair work on Lexington gates covers everything from sagging hinge barrels and seized rollers to photo-eye misalignment and limit-switch drift. On older estate gates anchored into fieldstone, we coordinate stone repointing before rehanging so the repair actually holds. Frost heave repairs are a recurring call every March and April in this town. Every repair starts with a written price handed to you before work begins. Gate Repair in Lexington has the full breakdown.
Gate Installation in Lexington
New gate installation in Lexington often means property lines along Marrett Road or Waltham Street, where span and setback requirements vary and the Historic Districts Commission may need to review anything visible from the way. We handle the paperwork conversation, the concrete pour below frost line, and the motor integration on day one. Written scope, written price, no surprises. Gate Installation in Lexington covers the process from measure to final inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Lexington
Gate motor failure in Lexington tends to follow a seasonal pattern: nor’easter ice loading strains swing-arm operators through the winter, and spring frost heave shifts posts enough to bind slide gates on their rails. We service Viking, Ghost Controls, DoorKing, and Elite motors, and we stock control boards, limit switches, and photo-eyes for all four in our service vehicles. That means most motor jobs in Lexington are diagnosed and completed in one visit. See our Gate Motor & Opener service page for the full brand matrix.
Motor Repair
Signs you need it
The motor runs but the gate doesn’t move.
What it costs in Lexington
Motor repair in Lexington runs $195 to $475, depending on whether it’s a limit switch, capacitor, or control board.
How we do it
We read the fault codes, test voltage at the board, replace the failed component, then photograph every adjustment and the part number installed.
Motor Installation
Signs you need it
The motor is over 15 years old and replacement boards are no longer manufactured.
What it costs in Lexington
Motor installation in Lexington typically runs $850 to $1,400, depending on brand and whether the arm bracket is intact.
How we do it
We remove the old operator, mount the new one on a reinforced bracket, program travel limits, and leave you a written record of every setting.
What Gate Motor & Opener Costs in Lexington
| Item | Typical range in Lexington |
|---|---|
| Motor repair (board, limit switch, capacitor) | $195 - $475 |
| Motor installation (standard swing or slide) | $850 - $1,400 |
| Intercom integration with existing motor | $375 - $700 |
How long does a gate motor repair take in Lexington?
Most motor repairs in Lexington are completed same visit, usually within 90 minutes. If a board is not on the truck, we order it and return within two business days. Written price before work starts, every time.
Can you repair a motor that another company installed?
Yes. We service all major brands including Viking, Ghost Controls, DoorKing, and Elite, regardless of who installed the original operator. Call (928) 260-0864 and describe the symptom; we’ll tell you the likely fault and the price range.
Gate Access Control in Lexington
Access control on Lexington estates frequently means a keypad or card reader mounted on a stone pillar near the street, wired back through conduit that’s been in the ground for decades. Salt corrosion and frost movement degrade those wire runs, producing intermittent “gate won’t open” failures that only appear after a thaw. We troubleshoot the full signal path from reader to control board to motor relay. See our Gate Access Control service page for the complete system list.
Keypad Entry
Signs you need it
Codes work sometimes, fail other times, or the keypad backlight is dead.
What it costs in Lexington
Keypad replacement or repair in Lexington runs $375 to $700, depending on whether the existing wiring can be reused.
How we do it
We test voltage at the keypad, check the wire run for corrosion breaks, install the new unit, and program all access codes in front of you.
Phone Entry
Signs you need it
Visitors call the gate line and the gate doesn’t open, or calls drop before connection.
What it costs in Lexington
Phone entry installation in Lexington typically runs $700 to $1,500, including the cellular or landline module and programming.
How we do it
We mount the entry unit, connect it to the gate motor relay, configure the directory, and test calls from a second line before we leave.
What Gate Access Control Costs in Lexington
| Item | Typical range in Lexington |
|---|---|
| Keypad entry repair or replacement | $375 - $700 |
| Phone entry system | $700 - $1,500 |
| Video intercom integration | $1,100 - $2,500 |
Can you add a keypad to a gate that only has a remote?
Yes. Most existing gate motors in Lexington accept an external keypad input. We run the wiring, mount the keypad on the pillar or post, and program unique codes for each user. Written quote before work starts.
Does phone entry require a landline?
No. Many Lexington installations use a cellular module with no phone line at all. If you have a landline, we can use it. Either way, the system calls your cell when a visitor presses the button. Call (928) 260-0864 for an exact quote.
Gate Parts & Welding in Lexington
Wrought iron gates on Lexington’s older properties fail where the metal meets the stone: hinge anchors loosened by frost, posts rusted thin at the base, rails separated from stiles by years of slam-and-close cycles. Welding on these gates often means working in the field, on a gate that can’t be removed without disturbing a historic wall or pillar. See our Gate Parts & Welding service page for the full scope.
Hinge Replacement
Signs you need it
The gate drags on the latch side and the hinge pins show visible wear or the gate sags.
What it costs in Lexington
Hinge replacement in Lexington runs $225 to $520 per pair, depending on gate weight and whether the anchor needs stone repointing.
How we do it
We support the gate, remove the old hinges, drill and anchor new ones, and photograph the final alignment for the job record.
Post Replacement
Signs you need it
The post leans more than an inch, has rust-through at the base, or is cracked from frost expansion.
What it costs in Lexington
Post replacement in Lexington runs $700 to $1,800 per post, including concrete below frost line and gate rehang.
How we do it
We cut the old post below grade, pour a new footing at 50 inches, set the post plumb, and rehang the gate after the concrete cures.
What Gate Parts & Welding Costs in Lexington
| Item | Typical range in Lexington |
|---|---|
| Hinge replacement (per pair) | $225 - $520 |
| Post replacement (per post) | $700 - $1,800 |
| Custom welding / rail repair | $200 - $650 |
Can you weld an ornamental gate without removing it from the stone pillars?
Yes. We weld in place on most Lexington estate gates, protecting the surrounding stone with heat shielding. If the hinge anchor is loose, we typically remove the gate, repoint the stone, and rehang after curing. Call (928) 260-0864 to schedule an assessment.
How long does a post replacement take in Lexington?
Most post replacements take one day for removal and pour, plus two to three days of cure time before the gate is rehung. The written price includes all concrete work, not just the post itself.
Brands We Service in Lexington
We service Viking, DoorKing, and Ghost Controls motors most often in Lexington, with parts for all three stocked on our trucks. We also carry Elite and LiftMaster control boards and photo-eyes, so most repairs are done the same visit. See our brands for the full list of what we work on.
Pricing for Gate Repair in Lexington, MA
| Service | Typical range in Lexington |
|---|---|
| Motor repair (board, limit switch, capacitor) | $195 - $475 |
| Motor installation (standard swing or slide) | $850 - $1,400 |
| Intercom integration | $375 - $700 |
| Keypad entry repair or replacement | $375 - $700 |
| Phone entry system | $700 - $1,500 |
| Video intercom integration | $1,100 - $2,500 |
| Hinge replacement (per pair) | $225 - $520 |
| Post replacement (per post) | $700 - $1,800 |
| Custom welding / rail repair | $200 - $650 |
Two things push gate repair prices higher in Lexington: fieldstone pillar work, which often requires repointing before a rehang, and frost-heaved posts that have moved more than a few inches and need a new footing below the 48-inch frost line. Whatever the job, the price is written down and handed to you before any work starts, under Haven Standard Clause 1.
Neighborhoods We Serve in Lexington
We cover all of Lexington, from the center historic district out to the town line. Most repair calls in Lexington get a same-day or next-day visit, depending on the time of year and the urgency of the failure.
- East Lexington
- Merriam Hill
- Five Points
- Grant Manor
- Follen Hill
Service Area - Cities Near Lexington
Vance Gate Repair covers Lexington and the surrounding towns. We also serve Woburn, MA, Winchester, MA, Burlington, MA, and Arlington, MA. Dispatch is coordinated from the Boston office, and Lexington crews respond locally.
Serving Lexington, MA - Our Local Coverage Area
We’re based in the Lexington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lexington
Repairs that don’t change the gate’s appearance or footprint generally don’t require Historic Districts Commission review, even in protected zones. Replacement or anything visible from the public way may trigger HDC approval. We can tell you which category your job falls into before work starts.
For a gate stuck open or a failed motor that’s left your driveway unusable, we aim for same-day response in Lexington. A live person answers the phone 24/7, so you’ll speak to a dispatcher immediately, not a voicemail box.
Yes. Lexington’s older estate gates are often anchored into fieldstone pillars and dry-stack walls. We coordinate repointing and masonry repair before rehanging hardware so the hinge anchors hold. The written quote includes any stone work required.
For a free estimate on any gate repair in Lexington, call Vance Gate Repair at (928) 260-0864. A live person answers, the price is in writing before work begins, and every visit leaves you a photographic record of what was found, what was adjusted, and what was installed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lexington Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.