Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lakewood, CA
Most Lakewood gate problems start either at the motor or at the post, and in this city it’s rarely just one thing. Homes built from the 1960s through the early 1980s through Applewood, Green Gables, and Alameda West still carry original wood gates with rotted posts and discontinued hardware, while newer foothills-adjacent properties near Green Mountain run automated ornamental iron through harsh UV and Chinook wind cycles. We repair both kinds, and we price every job in writing before work starts. Call (928) 260-0864 for a free estimate.
Why Lakewood Homes Are Different
At roughly 5,440 feet, Lakewood sits directly against the Front Range foothills, which makes it the Denver metro suburb most exposed to Chinook downslope wind events. Sudden 50 to 80 mph gusts along W. Alameda Avenue and Colfax rip swing gates off hinges and bend automated gate arms in ways flat suburbs like Aurora rarely see. Any gate repair or installation in Lakewood has to account for that recurring lateral wind load, not treat it as a one-off event.
The housing stock compounds the problem. Ranch-style homes in Applewood and Green Gables are now 40 to 60 years old, their original wood privacy gates showing failed strap hinges and posts rotting at the soil line. Clay-heavy soils through the Alameda corridor heave through repeated freeze-thaw cycles each winter, systematically knocking gate posts out of plumb. We check for post lean as a first diagnostic every spring: gates closing flush in October are often dragging the concrete by April. High-elevation UV also degrades wood finishes and powder-coat on metal gates faster than lower-elevation cities, so Lakewood gates tend to fail from multiple directions at once.
Our Main Lakewood Services
Two services drive most of the calls we take from Lakewood homeowners: repair work on existing gates, and full gate installations on new or replacement builds. Both are handled locally by crews dispatched from the brand’s Los Angeles office.
Gate Repair in Lakewood
Repair work in Lakewood runs from simple hinge replacements on older wood fences to full automation repair on wind-stressed slide and swing gates. We check post alignment before touching hinges or latches, because clay heave along the older Green Gables blocks makes post reset the only repair that sticks. Gate Repair in Lakewood covers the full repair scope, from broken welds to failed motors.
Gate Installation in Lakewood
New installations in Lakewood need to account for wind load from day one: heavier posts, reinforced hinge points, and operators matched to the gate’s actual weight and exposure. Whether it’s ornamental iron near Green Mountain or a wood replacement in Applewood, we design for the Chinook gusts that flatten lesser builds. Gate Installation in Lakewood walks through the full process, from site measure to final walk-through.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Lakewood
Gate motors in Lakewood fail from wind stress, UV exposure, and the electrical surges that come with high-elevation weather shifts. A swing arm that worked fine in September can be bent out of its travel path by a single downslope gust along W. Alameda Avenue, and older motors on 40-year-old ranch gates in Alameda West often burn out limit switches rather than trip cleanly. We service nine motor brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever is already on the property, we can work on it. Our Gate Motor & Opener service covers everything from a single capacitor replacement to full motor swaps on slide and swing systems.
Motor Installation
Signs you need it
The existing motor hums but doesn’t move the gate, trips its breaker repeatedly, or has failed entirely after a storm.
What it costs in Lakewood
Most swing-gate motor replacements run between $450 and $1,200, depending on the brand and whether the arm bracket is intact, with slide motors typically from $600 to $1,400.
How we do it
We pull the old motor, check the mounting plate and wiring for wind or corrosion damage, install the new unit, set limit switches, and photograph every adjustment before we leave.
Motor Repair
Signs you need it
The gate opens or closes partially, reverses mid-travel, or the motor runs but the gate jerks.
What it costs in Lakewood
Repairs like limit-switch reset, capacitor replacement, or gear-set service typically run $180 to $450, depending on the motor type and the part.
How we do it
We open the motor housing, test the capacitor and limit switches with a meter, replace what’s failed, and reset travel limits to match the gate’s actual path.
What Gate Motor & Opener Costs in Lakewood
| Item | Typical range in Lakewood |
|---|---|
| Swing motor replacement | $450 - $1,200 |
| Slide motor replacement | $600 - $1,400 |
| Motor repair (limit switch, capacitor, gear service) | $180 - $450 |
Can you replace a gate motor the same day in Lakewood?
Yes, if the motor is in stock or available locally, we can complete most motor replacements same-day. We bring common LiftMaster, Viking, and Ghost Controls units on the truck, and we confirm the written price before starting work.
What motor brands do you service in Lakewood?
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (928) 260-0864 with your motor’s brand and model, and we’ll tell you if parts are likely on hand.
Gate Access Control in Lakewood
Access control in Lakewood means more than the box on the post; it’s how the gate talks to the keypad, the remote, the phone line, and sometimes a card reader at a community entry. Older Lakewood homes often have keypads hardwired through sun-baked conduit that’s cracked open along the roof line, and Chinook wind stress on the gate itself pulls wiring loose at the hinges. We handle everything from a single keypad replacement to full video intercom integration, and our Gate Access Control service documents every connection so future troubleshooting doesn’t start from zero.
Keypad Entry
Signs you need it
Numbers stick, the keypad works intermittently, or codes stopped working after a storm.
What it costs in Lakewood
Keypad replacement typically runs $150 to $450, depending on whether it’s a wired unit or a wireless model paired to an existing receiver.
How we do it
We test the keypad’s output at the control board, replace the unit if it’s dead, reprogram codes, and photograph the wiring connections for the file.
Video Intercom
Signs you need it
The video feed is black, audio is one-way, or the indoor monitor won’t ring through.
What it costs in Lakewood
Video intercom replacement runs $500 to $1,500, depending on whether we’re installing a single-door unit or a multi-station system.
How we do it
We trace the wiring from the outdoor station to the indoor monitor, isolate the failed component, replace it, and confirm both audio and video are clean before wrapping up.
What Gate Access Control Costs in Lakewood
| Item | Typical range in Lakewood |
|---|---|
| Keypad replacement | $150 - $450 |
| Remote control programming or replacement | $50 - $200 |
| Video intercom replacement | $500 - $1,500 |
Can you program a new remote to my existing Lakewood gate opener?
Usually yes. We can clone or program remotes for most major brands on site, and we confirm the written price before starting. If the receiver is too old, we’ll tell you the replacement cost up front.
Do you replace keypads on gates with existing access control systems?
Yes. If the keypad is dead, we’ll replace it and mismatch it to the existing control board. Call (928) 260-0864 and we’ll confirm compatibility while you’re on the phone.
Gate Parts & Welding in Lakewood
Gate parts and welding work in Lakewood is often the difference between a gate that gets replaced and a gate that gets another 15 years. A wind event along Colfax that folds a gate arm or tears a hinge weld doesn’t mean the whole gate is done, and on 40-year-old wood gates in Alameda West, a new post and pair of hinges is frequently all that’s needed. We carry common hardware on the truck and weld on site, and our Gate Parts & Welding service includes a written photo record of every part installed.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinges creak and show visible rust or cracking.
What it costs in Lakewood
Hinge replacement for a standard wood or metal gate runs $225 to $650, depending on whether the post needs re-shimming or replacement.
How we do it
We support the gate, mark the post, pull the old hinges, drill and bolt the new hardware, and set the gate back to plumb before photographing the work.
Post Replacement
Signs you need it
The post leans, the gate won’t latch, or you can see rot at the base or cracked concrete around it.
What it costs in Lakewood
Post replacement runs $120 to $250 per post for metal posts set in concrete, and $180 to $400 per post for wooden posts with hardware re-mounting.
How we do it
We cut or dig out the old post, set the new one in concrete with proper drainage, brace it square, and re-hang the gate once the concrete has cured.
What Gate Parts & Welding Costs in Lakewood
| Item | Typical range in Lakewood |
|---|---|
| Hinge replacement | $225 - $650 |
| Post replacement (metal) | $120 - $250 |
| Post replacement (wood) | $180 - $400 |
Can you weld a broken gate on site in Lakewood?
Yes. We carry a portable welder on the truck and can repair most broken frames, hinges, and gate arms on site. The welded section is photographed and documented before we leave.
Do you replace rotted posts on older Lakewood wood gates?
We do. Rotted posts in Applewood and Green Gables are one of the most common calls we get, and we replace them with pressure-treated posts set below the frost line. Call (928) 260-0864 for a free estimate.
Brands We Service in Lakewood
We service Viking, Ghost Controls, DoorKing, and Elite motor systems, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule, so you’re not locked into one brand’s parts ecosystem. We stock common control boards, remotes, and limit switches for these brands, and most replacement parts are available same-week in Lakewood. See our brands for the full list.
Pricing for Gate Repair in Lakewood, CA
| Service | Typical range in Lakewood |
|---|---|
| Swing gate motor replacement | $450 - $1,200 |
| Slide gate motor replacement | $600 - $1,400 |
| Motor repair | $180 - $450 |
| Keypad replacement | $150 - $450 |
| Video intercom replacement | $500 - $1,500 |
| Remote programming or replacement | $50 - $200 |
| Hinge replacement | $225 - $650 |
| Post replacement (metal) | $120 - $250 |
| Post replacement (wood) | $180 - $400 |
Wind exposure, post condition, and the age of the existing motor are the three biggest price drivers in Lakewood. Whatever the number turns out to be, you get it in writing before we pick up a tool, so there’s no surprise invoice at the end of the job.
Neighborhoods We Serve in Lakewood
We cover the full Lakewood area, including the older ranch-home blocks and the foothills-adjacent subdivisions that see the worst of the Chinook wind. Response time across the city is typically same-day or next-day, depending on when you call and what the job needs.
- Applewood
- Green Gables
- Alameda West
- Green Mountain
- Lakewood Estates
Service Area - Cities Near Lakewood
Our crews serve Lakewood and the surrounding South Bay and Harbor-area cities, including Lomita, CA, Torrance, CA, Carson, CA, and San Pedro, CA. If you’re just outside Lakewood proper, call and we’ll confirm coverage for your address.
Serving Lakewood, CA - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lakewood
Most Lakewood repair calls are reached same-day, especially if the gate is stuck open or won’t close. Our dispatch is coordinated from the Los Angeles office, and a live person answers the phone 24/7 to set a window with you.
Most gate repairs and like-for-like replacements don’t require a permit in Lakewood, but a new automated installation may. We’ll confirm the requirements for your specific property before work starts so you’re not caught off guard.
We work with HOA specifications regularly and can match materials, colors, and automation requirements. Bring us the HOA’s written requirements and we’ll price the work to meet them exactly, in writing, before anything gets installed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakewood Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.