Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hendersonville
Gate repair in Hendersonville usually means one of three things: a swing gate that won’t swing, an operator that hums but refuses to move the gate, or a post that’s leaning far enough to drag the gate on the asphalt. Most repairs we handle in Hendersonville run between $180 and $640, with the higher end reserved for motor replacements and structural post work. If your gate is down right now, call (928) 260-0864 and a live person answers, day or night.
We’ve worked gates along the Old Hickory Lake coves, through the Indian Lake peninsula, and up into the newer subdivisions off New Shackle Island Road and Drakes Creek Road. We know what the humidity does to a wrought iron hinge here within three seasons. We know what the clay does to a gate post within five. That matters more than how many trucks we have.
Why Vance Gate Repair Is Hendersonville’s Preferred Gate Repair Company
Adrian Vance started working on gate systems in 2014, coming out of commercial access control work where a service call wasn’t finished until the wiring diagram was updated and the limit switch readings were written down. That habit moved with him into residential Hendersonville gates. Every job we complete, whether it’s a rusted hinge in the Lakewood area or a seized operator on a Gallatin Road estate, comes with a written price handed over before work starts and a photo record left with the homeowner when we leave. That’s Haven Standard Clause 1 and Clause 4, and we don’t skip them on a $200 hinge replacement any more than on a $4,000 motor swap.
Hendersonville homeowners call us because the repair stays repaired. The 365-Day Done Right Promise covers that: if the gate sags again, if the operator misbehaves after we recalibrated it, if anything about that repair is wrong within a full year, we come back and make it right at no additional charge. No argument, no fee, no expiration date inside that window. That’s the promise, in writing, on every invoice.
Crews serving Hendersonville are dispatched locally from our metro office, and a live person answers the phone 24/7. No voicemail loop at 10pm when the gate won’t close and the dog is standing in the opening. You call, a human picks up, and we tell you what the next step is. Gate Repair is what we do every single day, not a side service next to fencing or landscaping.
Our Gate Repair Services in Hendersonville
Hinge & Post Repair
Lakefront and near-lake lots in Hendersonville sit on clay that expands and contracts with Old Hickory Lake’s water table. The result is hinge posts that creep forward or settle, usually within two to five years of installation. We remove the gate, re-plumb the post, and set it in a deeper concrete footing so the clay’s movement stops winning. New hinge pins, new greaseable bushings, and the gate swings true again. Typical hinge and post repair in Hendersonville runs $340 to $780 depending on post condition and gate weight.
Gate Realignment
A swing gate that scrapes the driveway or won’t latch is almost always a post alignment issue, not a hinge issue. On Hendersonville’s shoreline lots, the posts move seasonally. We reset the gate’s geometry, adjust the hinges, and verify the reveal between gate and jamb is even top to bottom. Then we write down the measurements and photograph the final position so the next adjustment, if one is ever needed, starts from a documented baseline. Most realignments in Hendersonville run $180 to $320. If the post itself needs re-plumbing, that’s the hinge and post repair above.
Weld & Rust Repair
Old Hickory Lake’s persistent humidity means a wrought iron gate within a quarter mile of the water can develop significant rust at weld joints and hinge pins in a few years. We grind back to clean metal, reweld the joint, and treat the repair area so the rust doesn’t return next summer. For severe corrosion where the metal has lost thickness, we cut out the section and weld in new. Most weld and rust repair jobs in Hendersonville run $220 to $560. This kind of repair is specific to the lake effect we see on Sanders Ferry Road and along the coves that branch off the main lake.
Electric Gate Repair
Electric gate repair in Hendersonville covers the motor, the control board, the photo-eye (the infrared beam that stops the gate if anything crosses the path), and the wiring between them. Ice storms in the Nashville basin crack hydraulic arm seals and stress control board connections. When we arrive, we test the motor, check the photo-eye alignment, and measure the limit switch travel before touching anything. Then you get a written price for the repair, not a vague estimate. Most electric gate repairs run $240 to $680.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hendersonville
We service nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t push homeowners toward replacement just because their existing motor isn’t the brand we install most. If your Viking operator on a lake estate needs a new control board, we source the board. If a Ghost Controls unit on an Old Hickory Lake acreage gate keeps vibrating off its solar panels, we diagnose it rather than upselling a new system. That’s a repair company’s job.
Common Gate Repair Problems We See in Hendersonville Homes
- Lake-moisture corrosion on ornamental gates. Wrought iron gates along Old Hickory Lake’s coves rust at weld joints and hinge pins far faster than inland Hendersonville properties. The humidity sits on the metal continuously, and the rust moves through the joint unnoticed until the gate starts to drop.
- Clay soil heave twisting hinge posts. Shoreline lots have clay that absorbs lake-level moisture and swells, then contracts during dry spells. The post shifts forward, the gate sags, and within a few years the gate is dragging or the latch misses by an inch. This is the chronic Hendersonville problem we see on Sanders Ferry Road and the lake-adjacent cul-de-sacs branching off it.
- Ice storm freeze-thaw damage to operators. Hendersonville gets enough winter ice to crack hydraulic arm seals and seize bearings. After a storm rolls through the Nashville basin, we get a predictable surge of calls from homeowners whose gates stopped mid-cycle or won’t start at all.
- Solar operator failure on rural acreage gates. Many Hendersonville properties east of New Shackle Island Road and toward the Sumner County line have long driveways with no practical power run. Solar panels on gate operators get covered in oak pollen in the spring and ice in the winter. The battery drains, the gate stops responding, and the operator needs to be tested rather than replaced.
Pricing for Gate Repair in Hendersonville, TN
Here’s what Hendersonville gate repairs actually cost, in dollars, before anyone picks up a tool. Gate realignment runs $180 to $320. Hinge and post repair runs $340 to $780, depending on how deep the post is set and how heavy the gate is. Weld and rust repair runs $220 to $560. Electric gate repair, including motor, board, and photo-eye work, runs $240 to $680. Full operator replacement, when repair is no longer viable, runs $1,150 to $3,400 depending on the brand and whether the existing arm bracket is intact. You will have a written price in hand before any work begins, and the number on that paper is the number on your invoice. No surprises, no add-ons after we start. Call (928) 260-0864 for a free estimate on any gate repair in Hendersonville.
We Also Serve Cities Near Hendersonville
Vance Gate Repair serves Gate Repair in Hendersonville and the surrounding communities, including Mount Juliet, Gallatin, Nashville, and Lebanon. If you’re just outside Hendersonville proper but still within the Old Hickory Lake corridor, call us. We’ll let you know how soon we can get a crew to your gate and what to expect on the written price.
Serving Hendersonville, TN - Our Local Coverage Area
We’re based in the Hendersonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hendersonville
Because the hinge post is moving in the clay, not because the hinges are loose. Properties along Old Hickory Lake in Hendersonville sit on clay soil that swells when the lake level rises and contracts during dry months. The post heaves forward, the gate drops, and adjusting the hinge bolts only masks the real problem. We fix this by re-plumbing the post in a deeper concrete footing that extends below the active clay movement zone. Call (928) 260-0864 and we’ll come assess your post before the sag gets worse.
Yes. Many of those installations are already out east toward Gallatin, on long driveways where running mains power costs more than the gate itself. We size the solar panel and battery to the operator and the shade conditions, not by guessing. We work with Ghost Controls, Mighty Mule, LiftMaster, and FAAC solar units, and we’ll tell you honestly whether your tree canopy will support solar or whether a small battery bank is the better route. The written price covers everything, including the panel mount and wiring, before we start.
The hydraulic arm seal or the control board connection is usually what fails first after a Hendersonville ice storm. Water gets into the arm during the freeze-thaw cycle, the seal splits, and the arm loses pressure. On the board side, a power surge from the storm can trip a connector loose. We test the motor, check the arm seals, and read the control board before quoting anything. If the arm is cracked, that’s a part replacement, not a full motor replacement. Call (928) 260-0864 and we’ll tell you what our first available dispatch looks like.
We grind the rust back to clean metal, inspect how much thickness remains, and reweld the joint with a steel insert if the original section is too thin to hold. Then the repair area gets a rust-inhibiting treatment and paint match. Most ornamental gates in Hendersonville’s lake coves have one or two compromised joints, not a structurally failed frame, so replacing the whole gate is rarely necessary. A typical weld and rust repair on a lakefront Hendersonville gate runs $220 to $560.
It involves removing the damaged rack section, realigning the remaining rack so the pinion gear rides cleanly along the full travel, and replacing the rack if the teeth are stripped. For long driveways in Hendersonville, usually on the acreage properties east of New Shackle Island Road, we also check the gate’s guide rollers and the end stops because a rack failure often starts with a roller misalignment upstream. The repair is documented with photos and the torque readings are written down before we leave. Call (928) 260-0864 for a quoted price on the rack repair.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hendersonville and surrounding communities since 2014.