Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Chatsworth
Gate repair in Chatsworth usually costs $185-$620 depending on what failed, and most hinge, latch, and alignment work is completed in a single visit. If you live off Lassen Street, in the Chatsworth hills, or anywhere along the Santa Susana Pass corridor, you already know the wind and soil here treat gates differently than the flat Valley. Vance Gate Repair sends background-checked, uniformed technicians to Chatsworth with a written price handed over before any work starts. Call (928) 260-0864 and a live person answers, day or night.
Why Vance Gate Repair Is Chatsworth’s Preferred Gate Repair Company
Chatsworth gate repair calls tend to be heavier than elsewhere in the Valley. Equestrian-zoned lots mean 14-16 foot pipe-rail gates, decomposed granite post footings, and wind loads coming straight through Santa Susana Pass. We document every visit with photos and a written record of what was found, what was adjusted, and what was installed. That commercial-grade documentation habit goes back to Adrian Vance’s access-control work beginning in 2014, and it means the next technician to touch your gate, whether that’s us or not, never has to guess.
Our customers in Chatsworth keep our phone number for one reason: the written price is handed over before any work starts. Under Haven Standard Clause 1, you’ll never be surprised by an invoice at the end. And if a repair isn’t right, the 365-Day Done Right Promise means we make it right within the year at no additional charge. A free second opinion on any written estimate from another company is also part of how we work in Chatsworth.
Our Gate Repair Services in Chatsworth

Electric Gate Repair
Electric gate repair in Chatsworth typically runs $225-$480, and the most common failures we see are fried control boards after wind-driven power surges, misaligned photo-eyes, and limit switches knocked out of position. On equestrian properties, we routinely service operators paired with 16-foot pipe-rail gates that place far more torque on the motor than a standard suburban gate. We service nine major automation brands including LiftMaster, BFT, and Linear, so no one has to replace a motor that can be repaired.

Automatic Gate Repair
Automatic gate repair in Chatsworth usually costs $250-$620 depending on whether the issue is the motor, the rack, or the safety loop. Santa Ana wind events through the Santa Susana Pass derail cantilever slide gates off their tracks and strip nylon rack components, especially on long driveway systems with decomposed granite surfaces. After a wind event, we reset tracks, check travel limits, and photograph the new positions so the repair record stays complete. A photo-eye (the infrared beam that stops the gate if something crosses the path) is commonly knocked out of alignment by wind-driven gate movement.

Hinge & Post Repair
Hinge and post repair in Chatsworth is our most requested service, typically $260-$520 for a post reset and hinge replacement. On streets like Lassen Street and in the Chatsworth hills, gate posts are frequently set in decomposed granite or rocky caliche soil rather than poured concrete footings. Posts shift seasonally, throwing swing gates out of alignment, and replacing hinges alone won’t fix a moving footing. We excavate the post, re-set it in concrete, and install stainless steel hinge brackets that hold up to wind load without rusting.

Gate Realignment
Gate realignment in Chatsworth runs $185-$340 for a swing gate, and is often the result of a post that has moved rather than a hinge that has worn. Summer heat over 105°F causes steel tracks to expand and bind, while decomposed granite surfaces shift under the gate wheels. We measure the clearance, correct the geometry, and photograph the final position so there’s a baseline for any future movement. For slide gates, realignment includes checking the cantilever rollers, the track level, and the rack and pinion clearance.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Chatsworth
We repair whatever motor is already on your Chatsworth property. Our technicians service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. If you have a Viking or Ghost Controls opener on a solar-charged hillside gate, or a BFT hydraulic operator on a commercial slide gate near the 118 Freeway, we can work on it. We keep common rack, photo-eye, and limit-switch components stocked for Chatsworth calls, so most repairs don’t require a second visit.
Common Gate Repair Problems We See in Chatsworth Homes

- Hinge posts shifting in decomposed granite. Equestrian properties on Lassen Street and in the Chatsworth hills have posts set in caliche or granite, not concrete. The post moves seasonally, the gate sags, and hinge replacements fail within months until the footing is corrected.
- Santa Ana wind damage through Santa Susana Pass. Wind events rack pipe-rail frames, strip galvanized hinges, and derail cantilever slide gates. We schedule post-wind calls every fall and winter when gusts come hard through the Pass.
- Summer heat binding sliding gates. Steel tracks expand in 105°F afternoons, nylon rollers degrade faster from UV, and rack and pinion components snap. A gate that ran fine in the morning can bind by 3 p.m.
- Wide equestrian gates overloading operators. A 16-foot pipe-rail gate with a hydraulic operator places far more torque on the motor than a standard 10-foot gate. Operators that were never sized for the gate width fail earlier and need limit adjustments more often.
Pricing for Gate Repair in Chatsworth, CA
You deserve a number before you pick up the phone. Here are the ranges we quote in Chatsworth:
- Service call and diagnostic (waived if you proceed with repair): $75
- Gate realignment: $185-$340
- Hinge replacement with post reset: $260-$520
- Electric operator repair (control board, photo-eye, limit switch): $225-$480
- Full automatic gate repair including track or rack work: $250-$620
- Weld repair on pipe-rail or steel frame: $150-$400 depending on scope
The price is written and handed to you before any work starts. Not an estimate. A written price, under Haven Standard Clause 1. If you have another company’s written estimate, we’ll review it at no cost as a second opinion. Call (928) 260-0864 for a free estimate.
We Also Serve Cities Near Chatsworth

Our Gate Repair team covers the west San Fernando Valley, including Northridge, Canoga Park, West Hills, and North Hills. If you’re just over the Chatsworth line, call us and we’ll tell you when we can be there this week. For everything on this page specific to Chatsworth, we’ve written it based on the equestrian zoning, soil, and wind patterns that define this corner of the Valley.
Serving Chatsworth, CA - Our Local Coverage Area
We’re based in the Chatsworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Chatsworth

The panel isn’t the problem; the post footing is. Chatsworth’s equestrian streets, including properties off Lassen Street, commonly have gate posts set directly in decomposed granite or caliche soil instead of poured concrete. The post shifts seasonally, the gate sags, and straightening the panel or replacing hinges only lasts a few months. Call (928) 260-0864 and we’ll quote a post reset with a concrete footing and stainless steel hinge brackets.
The winds hitting Chatsworth come funneled through the Pass with lateral force that flat neighborhoods like Reseda don’t experience. The load racks wide pipe-rail frames, strips hinges, and derails cantilever wheels off their tracks. After a wind event, we reset track positions, torque the rack fasteners, and photograph every adjustment so you have a record.
Yes, and not just for code compliance. A 16-foot gate on a ranch property still requires functioning photo-eyes or contact edges to stop if a person, horse, or vehicle crosses its path. We test entrapment protection on every automatic gate repair in Chatsworth and will quote the parts if a sensor has failed. Estimates are free at (928) 260-0864.
Steel tracks expand in Chatsworth’s 105°F summer heat, and combined with UV-degraded nylon rollers, the gate can bind by mid-afternoon even though it ran fine all morning. We replace worn rollers, set a corrected track gap, and document the position so the repair holds through the next heat wave. Call us for a written quote.
Yes, if the panel location and battery capacity are matched to the site. Chatsworth hillside properties with decomposed granite footings often have posts that shift, which compounds the problem by throwing the operator’s travel limits out of range. We check both the power supply and the footing on every solar gate opener repair in Chatsworth, and we’ll hand you the written price before we touch a tool.
Call Vance Gate Repair at (928) 260-0864 for a free estimate on gate repair in Chatsworth. A live person answers every call, and you’ll have a written price before any work begins.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Chatsworth since 2014.





Before
After
Before
After