Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wellington
A new gate installation in Wellington typically runs $2,800 to $9,500 for a complete driveway system, with custom estate gates and automated operators at the upper end. Most Wellington properties we work on fall into two categories: master-planned community homes with 1990s-era slide gates that have reached the end of their service life, and equestrian estates needing wider, heavier gates built for daily horse trailer traffic. We dispatch crews to Wellington throughout the week and keep a live person on the phone at (928) 260-0864 around the clock.
What separates a Wellington gate job from one in Royal Palm Beach or Lake Worth is the workload the gate actually carries. A standard residential swing gate in a subdivision off Pierson Road opens maybe six times a day. A gate at an equestrian property off South Shore Boulevard opens twenty or thirty times before noon during training season. We size operators, hinge hardware, and post footings around that reality from the first site walk. You get a written price before any work begins, and a documented photo record when the crew leaves.
Why Vance Gate Repair Is Wellington’s Preferred Gate Installation Company
Wellington property owners call us because we show up prepared for what the local gate stock actually is: aging Doorking, Viking, and Elite operators wired into gates that were hung decades ago. Adrian Vance started this company in 2014 after years of commercial access-control work, and that background shows in how we handle a Wellington install. We don’t estimate. We document. You’ll see the condition of your existing posts, the measurements of your opening, and the exact model of operator proposed, in writing, before you approve a dollar of work.
We’ve installed north of 22,000 gates since 2014, every one with a written scope and a documented record when the job closed. That’s The Haven Standard. Clause 1 says the price is written before the work starts. Clause 4 says every visit leaves a photo log. No argument, no surprise invoice, and a 365-Day Done Right Promise on the completed installation. For Wellington specifically, that promise matters because the canal-adjacent soil conditions mean an installation isn’t finished the day the concrete cures. You’ll know it’s finished after a full wet season cycle.
Our Gate Installation Services in Wellington
Sliding Gate Installation
Sliding gates are the workhorse of Wellington’s gated communities, and most of the ones we replace were built in the 1990s and early 2000s. The original operators are obsolete, the rack and pinion hardware is worn, and the safety photocells either don’t exist or were never wired to current UL 325 standards. A new sliding gate installation in Wellington, sized for a standard two-car opening, runs $3,200 to $7,800 depending on the material (steel tube, aluminum, or iron) and the operator brand. On canal-adjacent lots, we set post footings below the seasonal water-table line so the gate doesn’t bind in August.
Swing Gate Installation
Wellington’s older subdivisions still have original single and double swing gates from the 1980s and 90s, and almost none of them have modern entrapment protection. That’s a code failure waiting to be discovered by an inspector, and a safety gap for anyone with kids or pets. We install swing gates with photo-eyes and edge sensors as standard, not as an upsell. A double swing driveway gate in Wellington typically lands between $2,800 and $6,500, with the higher end covering heavier custom iron and faster operators.
Security Gate Installation
Our Gate Installation team handles security-focused builds for Wellington homeowners who want more than a visual barrier. That means welded steel or reinforced aluminum gates, keypad or intercom entry, and operators with battery backup so the gate still functions during the lightning-driven power outages that hit Wellington every summer. Security gate installs run $5,000 to $12,000 depending on the width, automation, and access control configuration. We quote the power run, the safety edges, and the operator as separate line items so you know exactly what you’re paying for.
Driveway Gate Installation
Most driveway gates in Wellington serve one of two purposes: keeping horses in or keeping the neighborhood out. Both require different hardware. Equestrian owners off Lake Worth Road and South Shore Boulevard need wide-span gates with high-cycle operators rated for dozens of daily cycles, not the residential-duty motors sold at big-box stores. Subdivision homeowners in communities like Olympia or The Isles need operators that will hold up through Wellington’s brutal summer humidity without rusting the control board terminals. We’ll spec the right gear for the gate’s actual daily workload, and you’ll see the model number in the written quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Wellington
We work on whatever operator is already on the property. DoorKing, Viking, Elite, Ghost Controls, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Nine brands, one service van, and we don’t steer Wellington customers toward replacing a motor when a board or a limit switch is the actual failure. That’s a habit, not a sales tactic. If you’re installing new, we’ll recommend the brand that matches your gate’s weight and cycle load, and we carry the common parts on the truck so the install doesn’t stall waiting on a shipment.
Common Gate Installation Problems We See in Wellington Homes
- Obsolete control boards fried by summer lightning. Wellington sits inland, but the June-through-September thunderstorm belt still sends repeated surges through gate operators. 1990s boards were never designed for that, and after the third or fourth surge event, the board fails outright. We replace boards and add surge suppression as standard on any Wellington install.
- Canal-adjacent post footings that heave seasonally. The water table under Wellington rises during the summer wet cycle, and posts set near drainage easements shift. A slide gate that ran true in January starts binding on its rail and tripping reverse faults by August. The fix is a deeper footing or a helical pier, not another operator adjustment.
- Swing gates hung before entrapment protection existed. Wellington’s original 1980s and 90s gates went in before modern UL 325 safety standards. When we retrofit a new operator onto an old swing gate, we have to add photo-eyes and edge sensors or the gate fails inspection. That’s not an option; it’s the law.
- Undersized operators on equestrian estate gates. A residential-duty motor on a 20-foot horse farm gate burns out fast because it’s cycling thirty times a day, not six. Wellington’s equestrian traffic demands commercial-grade operators rated for high-cycle use. We quote the right motor for the actual daily load.
Pricing for Gate Installation in Wellington, FL
A standard single swing gate installation in Wellington runs $2,800 to $4,500. A sliding gate on a typical residential lot lands between $3,200 and $7,800. Custom security gates and double driveway systems run $5,000 to $12,000 depending on width, material, and automation. What moves the number most is the operator: a residential Viking or Ghost Controls motor sits at the lower end, while a commercial-duty DoorKing or Elite unit rated for equestrian estate traffic costs more. Post and footing work on canal-adjacent lots adds $400 to $1,200 when the footing needs to go deeper than the seasonal water line. Every quote is written, itemized, and handed to you before any work starts. Call (928) 260-0864 for a free estimate.
We Also Serve Cities Near Wellington
Our crews handle gate installation across Wellington and the surrounding communities. That includes Royal Palm Beach, Lake Worth, West Palm Beach, and Palm Beach Gardens. Dispatch is coordinated from our South Florida office, and Wellington jobs are scheduled with local crews who know the neighborhood gate stock.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wellington
In most Wellington gates, you can retrofit the operator and add entrapment protection without replacing the gate itself. The gate leaf, hinges, and posts are often still sound. What’s obsolete is the control board and the absence of photo-eyes and edge sensors. We replace the operator, add the safety devices, and bring the gate into code compliance. Replacement is only cheaper when the gate structure itself has failed: rusted-through rails, a hinge post rotted at the soil line, or a post that’s shifted far enough that re-hanging costs more than new steel. Call (928) 260-0864 and we’ll assess it in writing.
Your post footings are sitting in Wellington’s seasonal water table. The canal-laced lots across Wellington hold groundwater that rises during the summer wet cycle. Posts set at a shallow depth heave upward or settle unevenly, which throws the gate out of alignment and causes drag, binding, or reverse-fault trips. This is a Wellington-specific problem. A few miles east in Royal Palm Beach, the soil profile is different and the effect largely disappears. The fix is resetting the post with a deeper footing, below the fluctuation line. We assess this on every Wellington install before quoting the operator work.
A slide gate needs a longer run of fence or wall to slide along, but it handles wide openings with less stress on the operator and it doesn’t swing into the path of a horse trailer. A swing gate needs outward-swinging clearance and heavier hinges, but it works when there’s no room for a slide track. Wellington equestrian properties often go slide gate for the main farm entrance because the gate cycles so many times daily, and a slide gate is easier to automate with a high-cycle operator. We’ll spec the right design based on your opening width and daily traffic load.
Not necessarily. If the steel or aluminum gate leaf itself is straight and rust-free, the fix is resetting or reinforcing the post, not replacing the gate. We set the post on a deeper footing below Wellington’s seasonal water line, re-hang the gate, and re-align the operator. You pay for the post work and the adjustment, not a new gate. If the post has rotted or split below grade, replacement is the honest answer. We’ll show you photos either way.
If the gate was installed before the early 2000s, it probably doesn’t. Current UL 325 standards require photo-eyes at the entrapment zones and edge sensors on the leading edge of the gate. We check this on every Wellington installation, and if the protection is missing or outdated, we add it as part of the operator install. The gate won’t pass inspection without it. You’ll see the safety equipment listed as line items in your written quote before work starts. Call (928) 260-0864 for a free estimate on your gate installation in Wellington.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Wellington since 2014.