Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Selma
Gate installation in Selma runs $1,400 to $7,800 for most residential jobs, with swing gates on the lower end and automated sliding gates on the higher end. That’s a real number, not a teaser. We quote the same way: written, line-itemed, handed to you before any work starts. Vance Gate Repair has been doing this since 2014, and we know Selma’s gates the way you know your own driveway. Call us at (928) 260-0864 and a live person answers, day or night.
Why Vance Gate Repair Is Selma’s Preferred Gate Installation Company
Selma homeowners don’t call a gate company until the gate has already annoyed them for a season. We know that. Our crews run through Selma every week, from the ranch-style lots off Floral Avenue to the 1960s tract homes near Selma High. When you call, you get a named technician dispatched to your address, not a subcontractor who’s never seen a farm gate before. Every job ends with a photo record of what we installed and a written price you approved before we touched a tool. That’s the Haven Standard, and it’s been how Adrian Vance has run this company since 2014.
Selma customers see the same thing on every visit: background-checked, uniformed techs who show up when they say they will. The Gate Installation team handles everything from a single pedestrian gate to a full automated sliding driveway entrance. If you have a written estimate from another company, bring it. We’ll review it at no charge, because a second opinion should cost you nothing.
Our Gate Installation Services in Selma
Driveway Gate Installation
Driveway gates in Selma often span wider than the house they protect. That’s not exaggeration. Properties that border old vineyard parcels frequently have driveway openings sized for a flatbed or a tractor, not a Camry. We install dual-swing and sliding driveway gates sized for that reality, with operator arms rated for heavier cycles than a suburban gate would ever see. The written quote covers the gate, the posts, the operator, and the safety edges.
Pedestrian Gate Installation
Pedestrian gates are the quiet workhorse of any Selma property. We build and hang them to match your existing driveway gate, including powder-coated steel frames and proper self-closing hinges. If you have an older wrought-iron pedestrian gate near downtown with paint holding the rust together, we’ll tell you honestly whether it can be salvaged or whether a new gate is cheaper than chasing it.
Sliding Gate Installation
Sliding gates work well on Selma lots where a swing gate would block the driveway during the opening arc. Many properties on the east and south edges of town, closer to vineyard parcels, use sliding gates for exactly that reason. We install rack-and-pinion systems built for heavy use, with sealed bearing trucks that don’t bind when raisin dust settles into the track. If you’re replacing an old slide gate, ask us about Ghost Controls operators; they hold up well to the fall dust cycle.
Swing Gate Installation
Dual-swing gates are the classic Selma look, especially on the wide ranch-style lots built from the 1960s through the 1980s. A properly hung swing gate here needs a hinge post footing that goes below the fog-soaked soil line and sealed bearing hinges that don’t rust through in three winters. We install both single and double swing gates, and we always include the entrapment protection your safety code requires. Older Selma gates often predate that code; we bring them current.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Selma
We’re not tied to one manufacturer. Our techs work on DoorKing, Elite, Ghost Controls, and Mighty Mule operators every week in Selma, and we stock common replacement parts for all of them in our service vehicles. That means when a control board fails on an Elite operator during harvest, we’re not waiting on a distributor to ship from Texas. We also install new operators from any of those brands if your existing system is beyond repair. The decision is yours, and our written quote shows both options side by side.
Common Gate Installation Problems We See in Selma Homes
- Rotted hinge posts from Tule-fog seasons. Selma’s winter fog parks on metal and wood for weeks. We routinely remove older posts that look fine above ground but have lost integrity below the soil line. A new post footing usually costs less than the labor to repeatedly shim and patch a sagging one.
- Operators undersized for farm-equipment traffic. Many Selma gates were originally sized for passenger cars, then asked to handle trailers, ATVs, and flatbeds during and after harvest. That repeated cyclic load kills gearboxes early. We size replacement operators for the actual traffic, not the gate’s width alone.
- Rack and pinion wear from raisin dust. The east and south edges of Selma get vineyard dust every August through October. That fine grit works into slide-gate racks and motor housings, accelerating wear. We install sealed racks and recommend a post-harvest cleaning cycle; it extends operator life by years.
- Obsolete control boards with no entrapment protection. 1980s-era ranch gates often run on boards that aren’t made anymore and wouldn’t pass current safety code if they were. Retrofitting a modern board with a photo-eye and reversing edge is usually far cheaper than a full replacement, but some old operators aren’t worth the retrofit. Our quote tells you which.
Pricing for Gate Installation in Selma, CA
Here’s what we see in Selma’s market. A single swing driveway gate, steel frame with wood or aluminum infill, runs $1,400 to $3,200 installed, including posts and hardware but not automation. Adding an operator, whether DoorKing, Ghost Controls, or Mighty Mule, adds $1,100 to $2,400 depending on weight rating and whether we’re pulling new power or using the existing run. A full automated sliding gate starts around $3,800 and can reach $7,000 on wide openings with heavy-duty rack and a commercial-grade operator. Pedestrian gates run $600 to $1,800. The price we quote is written, line-itemed, and includes everything: gate, posts, hardware, operator, safety edges, and the photo record. No change orders unless you ask for a change.
We Also Serve Cities Near Selma
Vance Gate Repair’s Selma service area covers the city and the surrounding countryside, including Reedley, Sanger, Clovis, and Fresno. If you’re a few miles outside Selma proper, call anyway. We’ll tell you straight whether it’s within our weekly scheduling route.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Selma
Metal gate frames expand in Selma’s sustained triple-digit heat, and a gate that was hung tight in spring can bind against its post by August. Wood gates also warp when the Valley heat dries them unevenly. We account for this when we hang a new gate, setting clearances for a 105°F afternoon. If your existing gate is binding every summer, the fix is usually re-hanging with proper thermal clearance. Call (928) 260-0864 for a written quote.
Usually, yes. Many Selma properties near downtown have original wrought-iron swing gates with decades of paint protecting the metal. If the gate itself is structurally sound, we can replace the hinges, reset the posts if needed, and install a modern operator with entrapment protection, keypad, and photo-eyes. It costs less than a full gate replacement, though we’ll show you both numbers so you can decide with real figures.
Raisin dust is the culprit. From August through October, fine agricultural dust from surrounding vineyard parcels gets into slide-gate tracks, racks, and motor housings, acting like a grinding paste on gear teeth. Properties on Selma’s east and south edges are hit hardest. Sealed gearboxes, rack covers, and a post-harvest cleaning each November are the standard fixes. We document the gear condition with photos before and after every visit.
Sometimes. If the hinge post is solid and the panel itself isn’t warped, we can often re-hang the sagging side with new sealed bearing hinges and reset the operator limit. If the post has rotted from years of Tule-fog moisture or the panel has twisted from heat, replacing only the panel is a temporary patch. We’ll tell you which situation you have and quote the honest fix. The quote is written before we start.
Yes. California gate safety law requires automatic gates to have entrapment protection, which means photo-eyes that stop the gate when something crosses the path, a reversing mechanism that detects contact, and proper warning signage. Older Selma gates installed before the code existed often lack this. We bring every installation and every retrofit up to current code. It’s not optional insurance; it’s the law, and it’s how we install every gate.
Ready to Talk About Your Selma Gate?
Call Vance Gate Repair at (928) 260-0864. You’ll get a live person, a straight answer, and a written price before any work starts. Selma’s gates take a beating from harvest traffic and Tule fog. We build and install for that reality, not for a showroom.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Selma and the Central Valley since 2014.
Gate Installation in Nearby Areas