Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Enterprise
Gate installation in Enterprise runs $2,800 to $9,600 for most residential jobs, with slide gates at the higher end and single swing gates at the lower. That’s the honest range we quote in writing before any work starts, because the worst thing a homeowner can do is approve a job without a number on paper. We dispatch crews from our Las Vegas office directly into Mountain’s Edge, Rhodes Ranch, Southern Highlands, and every development in between. Call (928) 260-0864 and a live person answers, day or night.
Why Vance Gate Repair Is Enterprise’s Preferred Gate Installation Company
Enterprise is different from older Vegas neighborhoods, and we treat it that way. The housing stock here is overwhelmingly 2000s-to-2020s master-planned construction, which means the gates we install are almost always automated ornamental iron or powder-coated aluminum. Most of those original builder-installed operators are now hitting the 15 to 20 year mark simultaneously, so we spend a lot of time replacing tired motors and control boards while the gate itself is still solid. That gives us a read on what actually lasts in this specific environment, and what fails seasonally.
We know the HOA landscape here better than any gate company working the strip corridor. Mountain’s Edge, Rhodes Ranch, and Southern Highlands sit among the most HOA-dense unincorporated territory in Clark County, and nearly every gate we install touches an architectural review committee at some point. We handle that for you, including the paperwork, the spec sheets, and the color-matching that gets your gate past review the first time. Adrian Vance built this company on commercial access-control documentation, and that habit follows every residential job in Enterprise: written scope, written price, photo record when we leave.
Every crew member is background-checked and uniformed. You get a name and a photo before we arrive, and every job is covered by our 365-Day Done Right Promise. If the install isn’t right, we make it right within a full year. No argument, no second invoice.
Our Gate Installation Services in Enterprise
Driveway Gate Installation
A new driveway gate in Enterprise typically runs $3,200 to $8,900 depending on width, material, and whether we’re automating it from day one. Most homes here have a double driveway, so we’re usually hanging two leaves rather than one. The soil matters more than people expect: caliche expands and contracts through the summer, so we set post footings deeper than the minimum and backfill with gravel where the native soil is highly alkaline. A gate installed at code-minimum depth in Enterprise will drift within two summers.
Pedestrian Gate Installation
Pedestrian gates in Enterprise communities like Southern Highlands and Rhodes Ranch often sit next to a shared wall and serve as the daily entry point for foot traffic. Comfort matters. We install self-closing hinges, magnetic latches, and keypad-compatible strikes so the gate serves residents without being a security hole. A standard powder-coated aluminum pedestrian gate with a keypad entry runs $1,400 to $3,000 installed.
Sliding Gate Installation
Sliding gates are our most common install across Enterprise and our Gate Installation team handles them at every scale, from a 12-foot single driveway slide to 20-foot double-track commercial openings for HOA entries. The key difference between a 10-year slide gate and a 3-year slide gate here is the concrete pad and the V-track. We pour a reinforced pad, set the track level to within an eighth of an inch, and use a cantilever design where the driveway slope makes a bottom-track gate impractical. Enterprise slide gate installs run $4,500 to $9,600.
Swing Gate Installation
Swing gates dominate Enterprise because most driveways here are wide and flat. The challenge is not the gate itself. It’s the operator selection and the hinge post engineering. A 16-foot ornamental iron swing gate weighs several hundred pounds, and on a west-facing pillar in Mountain’s Edge, the operator housing can reach 150°F on a July afternoon. We spec commercial-grade operators with thermal cutoffs on those exposures and add ventilated covers where needed. Swing gate installation in Enterprise runs $3,000 to $7,800.
Security Gate Installation
Security gates in Enterprise often serve a dual purpose: keep unauthorized vehicles out and satisfy HOA design standards that prohibit anything that looks too industrial. We build security gates that match residential aesthetics, using heavier steel frames clad in powder-coated aluminum to match the surrounding fence. Access control is part of this conversation, from keypads to vehicle detection loops to app-based entry systems. A security-focused automatic gate with access control runs $6,000 to $14,000 depending on the control system and gate weight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Enterprise
We work on nine major gate-automation brands, and for Enterprise customers we keep local stock of the most common DoorKing, LiftMaster, and Elite parts so a repair or install doesn’t stall waiting on a distributor. If you already have a Ghost Controls or Mighty Mule operator on the property, we service it rather than steering you toward a replacement you don’t need. The brand decision matters less than the installation quality: a properly wired, properly ventilated, properly anchored operator will outlast a premium-brand unit that was slapped onto a builder-grade circuit. We’ll recommend the unit that fits your gate’s weight, your pillar’s sun exposure, and your HOA’s aesthetic constraints.
Common Gate Installation Problems We See in Enterprise Homes
- Builder-grade operators on shared GFCI circuits. In master-planned areas like Mountain’s Edge, the gate operator often shares a circuit with landscape lighting. When the lighting trips the GFCI, the gate goes dead. We run a dedicated 20-amp circuit with proper conduit on every install.
- Post footings set too shallow in caliche soil. Caliche looks like bad news to dig and inexperienced crews stop early. One summer of ground movement later, the swing gate sags and the operator gears strip. We drill to proper depth and gravel-backfill on every post we set.
- West-facing pillars cooking residential operators. Southern Highlands and the western edge of Mountain’s Edge get direct afternoon sun on the gate pillar. Without thermal protection, a residential control board fails within two seasons. We spec operators with thermal cutoffs or add ventilated shrouds.
- No conduit run during construction. Builders rarely leave a path for automation. Without conduit, a future gate operator requires trenching across the driveway or a surface channel that looks bad and fails HOA review. We trench proper conduit before the gate goes in.
Pricing for Gate Installation in Enterprise, NV
Here’s what we quote in Enterprise, in real dollars. A basic single swing gate with a standard operator runs $3,000 to $5,200. A double swing gate with automation and two operators runs $5,500 to $8,900. A slide gate runs $4,500 to $9,600 depending on track type and driveway width. A security gate with access control starts at $6,000 and runs to $14,000 for heavier steel and app-based entry. These ranges are written, handed over on paper, and agreed before we touch a tool. If the scope changes mid-job, we re-quote in writing before the extra work starts. That’s Haven Standard Clause 1. Estimates are free, and a live person answers the phone 24/7 at (928) 260-0864.
We Also Serve Cities Near Enterprise
Vance Gate Repair serves the entire Las Vegas Valley from our metro office, and we regularly handle installs in Las Vegas, Henderson, North Las Vegas, and Paradise. If you’re in any of those communities and need this kind of work, you can read more about our Gate Installation in Enterprise service area or call us directly for a written estimate. We know the valley’s soil, climate, and HOA landscape from years of daily work across all of it.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Enterprise
Yes, in nearly every master-planned development in Enterprise, including Mountain’s Edge, Rhodes Ranch, and Southern Highlands, an automatic gate requires architectural review committee approval before installation. The gate’s material, color, height, and operator housing must match the community’s design standards, and some HOAs require a permit copy before they’ll issue approval. We handle the application for you, including spec sheets and color samples, and we install temporary safety measures like portable photo-eyes while the approval is pending, because a gate left open or non-compliant for even one evening triggers a violation notice. Call (928) 260-0864 and we’ll walk you through your specific HOA’s requirements.
The sag almost always traces to the hinge post footing, not the operator. Enterprise sits on highly alkaline caliche soil that expands and contracts with moisture and temperature swings, and a post set at minimum depth will shift enough within one summer to throw the gate leaf out of alignment. Once the gate sags, the operator has to work against gravity, and the gear strips. We set post footings deeper than code minimum and backfill with gravel to isolate the concrete from the reactive soil. If a gate we installed ever sags, the 365-Day Done Right Promise covers the correction.
Hardwired is the better choice for nearly every gate in Enterprise. Solar operators depend on consistent sun exposure, and while the Las Vegas Valley gets plenty of sun, the extreme heat degrades solar panel output and battery life faster than in milder climates. A hardwired operator on a dedicated 20-amp circuit will outlast a solar unit here, and it won’t die during a cloudy winter stretch. That said, solar makes sense for a pedestrian gate or a single swing gate far from the panel, provided we’ve calculated the panel angle and battery capacity for this climate. We’ll give you both options in writing with real numbers before you choose.
On a west-facing pillar in Enterprise, where surface temperatures exceed 150°F in summer, we recommend commercial-grade operators with built-in thermal cutoffs. LiftMaster’s LA400 and DoorKing’s 9150 series both handle direct sun exposure better than residential-grade units, and we add a ventilated cover to keep the housing from acting like an oven. Standard residential operators without thermal protection fail on those pillars within two seasons, which is why we don’t install them there. The brand matters less than the thermal rating, and we’ll spec the unit that matches your pillar’s exposure.
Automating a manual gate in Enterprise usually involves three things: running a dedicated circuit from the panel to the gate post, setting an operator foundation pad or reinforcing the hinge post, and installing the operator itself with photo-eyes and edge sensors for safety. The power run is often the expensive part, because most builders in master-planned communities like Mountain’s Edge and Rhodes Ranch ran only a low-voltage landscape wire to the gate area, not proper conduit. We trench a new 1-inch conduit, pull a dedicated 20-amp circuit, and then mount the operator to a properly engineered pad. A manual-to-automatic conversion in Enterprise runs $2,800 to $5,500 depending on the power run distance and the gate’s weight. Call (928) 260-0864 for a written estimate.
One Thing to Demand During Any Gate Installation in Enterprise
If you take nothing else from this page, take this: demand a dedicated circuit and proper conduit from day one, and demand a written price before the first tool comes off the truck. We recently installed a slide gate in the Rhodes Ranch community where the builder had run only a low-voltage landscape wire instead of proper conduit for a gate operator. Our techs trenched a new 1-inch conduit from the panel to the post, pulled a dedicated 20-amp circuit, and installed a LiftMaster operator with a safety photocell across the driveway. The HOA approved the aesthetic because we matched the powder-coated aluminum to the existing fence. That job cost more than a surface-mounted operator would have, but it will still be running correctly in ten years. The alternative is a gate that dies every time the landscape lighting trips and a $2,000 correction two years later. Under Haven Standard Clause 4, every job includes a documented photo record: what we found, what we set, what we installed. No future technician has to guess, and you never pay twice to rediscover the same problem. Call (928) 260-0864 for a free, written estimate on gate installation in Enterprise.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Enterprise and the Las Vegas Valley since 2014.
Gate Installation in Nearby Areas
