Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Englewood
Gate installation in Englewood, CO typically runs between $1,450 and $4,800 for a single driveway gate, with automated swing and slide systems ranging $3,200 to $7,500 depending on the operator, post work, and site access. Most Englewood jobs take one to two days once materials arrive, and the written price you get before we start is the price you pay. Call (928) 260-0864 and we’ll schedule a site walk in Englewood within 48 hours.
What sets Englewood apart from newer suburbs to the south is the alley. Homes in Bates-Logan, along South Broadway, and through the grid blocks built between the 1940s and 1970s back onto compacted gravel easements that city trash trucks and delivery vans use as primary access. That means the gate on your alley side isn’t decoration. It gets hit, slammed, leaned on, and heaving with the freeze-thaw cycle every winter. We plan Englewood installations around that reality, not around a catalog photo.
Why Vance Gate Repair Is Englewood’s Preferred Gate Installation Company
Adrian Vance started this company in 2014 doing commercial access-control work, where every job required a wiring diagram, a photo log, and a written record before the site was signed off. That habit carried over to residential gate work in Englewood, and it’s why our customers get something most gate companies don’t hand over: a documented photo record of what was found, what was set, and what was installed, left with the homeowner and filed in the job record. The Gate Installation team treats your Englewood alley gate with the same rigor as a controlled-access commercial site.
Englewood homeowners call us because the price is in writing before any tool comes off the truck. That’s Haven Standard Clause 1. You’ll get a flat price for the gate, the post work, the operator, and the safety edges, handed to you on paper. No verbal estimate that drifts. No invoice at the end that looks nothing like the quote. And under Clause 4, every visit ends with a photo log of the work: the old post pulled, the new footing poured, the limit switch setting, the photocell alignment. If you ever sell the house or need a second opinion later, the record is right there.
Our technicians are background-checked and uniformed, and we send you their name and photo before they arrive. A live person answers our phone 24 hours a day, seven days a week at (928) 260-0864. Not a voicemail loop, not a callback queue. When your gate fails on a Sunday night and the alley is open to the street, someone picks up.
We also hold every Englewood job to the 365-Day Done Right Promise: if the installation isn’t right within one full year, Vance makes it right at no charge. No argument, no fee, no expiration date inside that window. That promise applies to every gate we hang, every post we set, and every operator we wire in Englewood.
Our Gate Installation Services in Englewood
Driveway Gate Installation
Most Englewood driveway gates are on lots where the garage sits behind the house, accessed from the alley. That changes the job. A driveway gate here has to clear the trash truck’s swing radius, survive chinook wind gusts that funnel down the South Platte corridor past 60 mph, and hold plumb through freeze-thaw cycles that heave shallow post footings. We size posts and footings for those loads, and we hang the gate so it swings or slides clean even when the alley grade is uneven. A typical driveway gate install in Englewood runs $1,800 to $4,200 for a manual gate and $3,500 to $6,800 automated.
Pedestrian Gate Installation
The pedestrian gate on a Englewood side yard does more work than people think. It’s the gate the mail carrier uses, the gate kids slam on the way to the alley, the gate that has to latch securely when the wind kicks up. We install pedestrian gates with self-closing hinges and heavy-duty latches sized for repeated use, and we set the post in a concrete footing deep enough to stay plumb after a wet, freezing winter. Pedestrian gates in Englewood typically run $850 to $1,900, depending on width, material, and whether we’re replacing a rotted post.
Sliding Gate Installation
This is where Englewood’s tight sites come into play. A lot of the older lots off South Broadway and through the numbered avenues have less than four feet between the garage wall and the alley line. A swing gate simply won’t work there. A slide gate rides on a track or cantilever wheels parallel to the fence line, and it’s the right answer for narrow side yards, short driveway aprons, and driveways where the gate would swing into traffic. We install slide gates with reinforced rack and pinion systems because Englewood’s chinook winds will bend a lightweight aluminum frame if it isn’t braced properly. Sliding gate installations run $2,800 to $6,500 in Englewood, depending on track type and whether the operator is included.
Swing Gate Installation
Swing gates remain the most common choice for Englewood driveways with enough clearance, and the most common failure point is the hinge post. When that post heaves out of plumb from freeze-thaw, the gate binds on the latch side and eventually drags. On new swing gate installs we pour post footings deeper than minimum code, typically 36 inches, because the gravel alley easements here hold water after snowmelt and the saturated soil cycles the post out of alignment within a season or two if the footing is shallow. A manual double swing gate in Englewood runs $1,600 to $3,800; automated systems fall between $3,800 and $7,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Englewood
We install and service nine major gate-automation brands, and on Englewood jobs we regularly work with Elite, DoorKing, Viking, and Ghost Controls equipment. That matters because Englewood’s older homes often have an existing operator on the wall, and you shouldn’t have to replace a motor just because the company you called only carries one brand. We stock common boards, remotes, photocells, and limit switches locally, which shortens turnaround on Englewood installs and repairs alike. If you’re replacing an old tube-steel gate and the swing arm on your Ghost Controls opener is still sound, we’ll reuse it and save you the cost of a new operator. Our interest is the gate working, not moving you toward a brand we happen to sell.
Common Gate Installation Problems We See in Englewood Homes
These are the failure modes we document on Englewood jobs more than anywhere else, and they drive how we spec new installations:
- Post heave from freeze-thaw in alley easements. The compacted gravel behind Bates-Logan and South Broadway homes drains poorly after snowmelt. Saturated soil freezes and expands, jacking 4×4 posts out of plumb within a season. On new installations we pour deeper footings than code minimum because a shallow footing is a guaranteed sagging gate within two winters.
- Chinook wind damage on lightweight aluminum frames. The Front Range gets gusts past 60 mph that slam gates against stops. Unless the frame is reinforced and the rack is pinned properly, the gate bends at the latch stile. We’ve pulled warped aluminum slide gates off Englewood tracks that were installed with no rack reinforcement anywhere.
- Restricted working space forcing bad gate geometry. When a swing gate won’t clear the garage or the alley, some installers squeeze it in anyway and the gate shears the latch every time the wind rises. We convert tight Englewood driveways to slide gates instead, but the narrow easement means we have to plan the operator placement and safety edge routing carefully so the gate doesn’t fault on every pass.
- Latch shear from alley traffic. Trash trucks and delivery vans use Englewood alleys as primary access. A gate that doesn’t clear the truck’s swing, or a latch installed at the wrong height, gets clipped. We set latch hardware and gate stops to the actual clearance the site provides, and we photograph the as-built condition so there’s no question later.
Pricing for Gate Installation in Englewood, CO
Here’s what Englewood homeowners can expect to pay for common gate installations. These are the ranges we quote most often on sites in this market:
- Pedestrian gate (wood or steel, self-closing, with new post): $850 to $1,900
- Single manual swing gate (driveway, with new posts and hardware): $1,450 to $2,600
- Double manual swing gate (shared driveway or wide alley access): $1,800 to $3,800
- Automated single swing gate (operator, safety edges, photocells): $3,500 to $5,800
- Automated double swing gate (full system with operator): $4,200 to $7,500
- Sliding gate installation (cantilever or track, manual): $2,800 to $4,500
- Automated sliding gate (with operator and safety system): $4,500 to $6,800
What moves the number is the post work. In Englewood, the post is usually where the old gate failed, so most new installations include pulling the old post, augering a deeper footing, and setting a new 6×6 or steel post in concrete. If we’re working on an alley easement with poor drainage, we go deeper than code because we know what the freeze-thaw does here. The quote you get is the exact number, in writing, before we start. Call (928) 260-0864 for a free site walk and written estimate in Englewood.
We also offer a free second opinion on any written estimate from another company. Bring us the paperwork and we’ll review it against what we see on site. No charge, no obligation.
We Also Serve Cities Near Englewood
Vance Gate Repair serves Englewood and the surrounding metro, with crews dispatched locally to Littleton, Denver, Aurora, and Wheat Ridge. If your property sits near the Englewood line or your gate serves a property in one of those neighboring cities, the same written-price standard applies. Call (928) 260-0864 and we’ll confirm coverage and schedule a site visit.
Serving Englewood, CO - Our Local Coverage Area
We’re based in the Englewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Englewood
For most residential gate installations, the gate itself doesn’t require a separate permit in Englewood, but we always check the current city code before we start because alley easement work can trigger setback requirements depending on how close the gate sits to the right-of-way line. What we handle regardless is the structural side: post depth, footing diameter, and clearances. If your specific site needs a permit, we’ll tell you at the site walk and include it in the written scope. Call (928) 260-0864 and we’ll check your address against current Englewood requirements.
It’s almost always the post, not the hinges. On Englewood alley easements with compacted gravel and poor drainage, the saturated soil freezes and heaves the post out of plumb by one to three inches within a season, and that moves the hinge geometry enough to make the gate bind or drag even if the hinges are in good condition. We document this on the majority of alley gate service calls in Bates-Logan and South Broadway-adjacent neighborhoods. Replacing hinges without fixing the post buys you maybe one winter. A deeper footing and a properly set post is the actual repair. Call (928) 260-0864 and we’ll pull the post and show you exactly what moved.
Yes, and that’s a conversion we do regularly on Englewood’s older lots. If the space between the garage wall and the alley line is too tight for a swing gate’s arc, a slide gate rides parallel to the fence line and uses the length of the property instead of the width. The caution is the operator placement: in a narrow easement the loop detector and safety edges need careful routing or the gate faults on every vehicle pass. We plan that layout during the site walk and write it into the quote. Call (928) 260-0864 and we’ll look at your side yard in person.
We set the gate’s travel limits, latch height, and stop hardware to the actual clearance the alley provides, not to a standard template. Englewood alleys get constant traffic from city collection trucks and delivery vans that swing wide, so we measure the turning radius at your specific gate line and hang the gate so it clears that arc. We also photograph the as-built clearance and include it in your job record. If a truck still clips the gate, the record shows the before condition and makes the repair path straightforward. Call (928) 260-0864 and we’ll walk the alley with you.
For Englewood’s high-UV exposure at roughly 5,300 feet, we generally recommend Elite or DoorKing operators for heavier gates and Ghost Controls for lighter residential swing gates, but the right answer depends on the gate’s weight, leaf width, and duty cycle. The bigger factor here is enclosure: the operator’s control board and capacitor degrade faster when the housing sits in direct Colorado sun without shade, so we spec a ventilated enclosure or shaded mounting position where possible. The written quote will include the exact model we recommend and why. Call (928) 260-0864 and we’ll match the operator to your gate and exposure.
How We Approach Englewood Installations Differently
Here’s the part most generic gate advice never addresses. In Englewood’s older neighborhoods, the real challenge isn’t the gate itself. It’s the soil under the post. Alley easements behind homes off South Acoma, South Sherman, and the numbered avenues are compacted gravel that doesn’t drain well. After snowmelt, the ground is saturated. When it freezes, the water in the soil expands and lifts the post, and every time that happens the gate hangs a little lower on the hinge side. We see it so often we now assume any Englewood post under three feet deep is a future failure. So on new installations, we pour footings deeper than code minimum, and we use 6×6 posts where the old gate had a 4×4. It’s a small material cost difference and it’s the difference between a gate that clears the ground in year five and one that doesn’t.
We installed a double swing gate for a 1950s ranch on a shared driveway off South Acoma Street, where the existing tube-steel gate had sagged so badly it dragged on the asphalt. The real problem was the hinge post - it had heaved 2 inches out of plumb over the winter, so we pulled it, set a new 6×6 post in a 36-inch concrete footing, and hung an Elite swing gate operator with a safety photocell across the driveway. The homeowners told us the gate finally clears the ground even during chinook wind gusts. That’s the kind of fix that only comes from knowing what this specific city’s soil and weather do to a gate over time.
For Englewood’s newer townhome and mixed-use projects near CityCenter, the job shifts. Those sites often need automated courtyard gates, pedestrian access control, and crash-rated hardware that fits a modern utilitarian look. The operator brands and safety requirements differ, but the process doesn’t: written scope, written price, photo record, done right promise. Same standard, different site.
Get a Written Quote for Your Englewood Gate Installation
If you’re in Englewood and your gate is sagging, rusted through, or simply doesn’t fit the way your property works anymore, call us. We’ll walk the site with you, measure the actual clearances, check the post condition and footing depth, and hand you a written quote with the exact price before any work begins. You’ll know the operator model, the post spec, the safety edge plan, and the total. No surprises at the end.
Call (928) 260-0864 for a free estimate, or to ask us anything about gate installation in Englewood. A live person answers. We’ll dispatch a named, background-checked technician to your property, and you’ll get the photo record to keep.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Englewood gate installation and repair since 2014.