Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Installation in Colleyville, TX: What Homeowners Need to Know
A new driveway gate installation in Colleyville typically runs $4,800 to $14,000 for a custom ornamental iron swing gate with automation, while a simpler single swing gate on an existing post footings starts around $3,200. Most Colleyville installations are completed in two to three working days once materials arrive. The price is always set in writing before any metal is cut or any post hole is dug, so you know the full number before we begin. That’s the Colleyville reality: this is a city of estate-sized properties and custom ironwork, not pre-hung kits you can order from a catalog.
Colleyville’s specific soil and housing stock make gate installation work here its own discipline. Half-acre lots, perimeter iron fencing, and gates hung during the original construction of homes built between the mid-1980s and early 2000s mean we are usually working on or around older footings rather than starting from bare ground. Call (928) 260-0864 to speak with someone who understands the difference between a gate problem and a soil problem.
Why Vance Gate Repair Is Colleyville’s Preferred Gate Installation Company
We work differently in Colleyville because the homes here demand it. Most of the automatic gates in this city are ornamental iron swing gates hung on brick or stone pillars, and most of them are 20 to 35 years old. That means before we quote a new gate, we look at what’s already in the ground: the post footing depth, the column condition, the hinge wear, the clay movement. If the footings were set too shallow for Blackland Prairie clay, a new gate installed on those same posts will drift out of alignment within a year. We price the post work honestly because skipping it is how homeowners end up paying twice.
Every Gate Installation job we complete in Colleyville includes a written photo record of what was found before work started, what was installed, and how the final gate was set. That documentation habit came from Adrian Vance’s commercial access-control background starting in 2014, and it’s what separates a done-right job from a guess. The Haven Standard applies to every visit: a written price before work begins, a documented record when the technician leaves, and a 365-Day Done Right Promise on every installation we complete. If the gate is not right within a full year, we make it right at no additional charge. A live person answers our phone 24 hours a day, so when you call about a gate that’s down at 9 p.m., you get a person, not an answering service.
Our Gate Installation Services in Colleyville
Driveway Gate Installation
Most driveways in Colleyville estates are wide enough to need either a double swing gate or a sliding gate, and the soil here pushes us toward the swing option on most lots. A new double swing gate on half-acre properties along Glade Road or off Pleasant Run Road includes setting posts below the active soil zone, which is the only way to prevent the gate from dragging within the first two wet-dry cycles. We fabricate to match existing perimeter iron where needed, and we set travel limits and safety photocells on every automated gate.
Pedestrian Gate Installation
Side-yard and courtyard pedestrian gates in Colleyville are often matched to the driveway gate’s ornamental iron pattern, especially in neighborhoods like Montclair and Remington Park where the aesthetic standard is set by the original builder. A new pedestrian gate with a coded keypad or card access starts around $1,800 to $3,400 depending on gate width and whether the existing pillar can support new hardware. We check the pillar footing before mounting anything to it. A gate that drags now will drag worse after a rainy spring if the pillar itself is heaving.
Sliding Gate Installation
Sliding gates make sense on Colleyville properties where the driveway grade slopes uphill toward the house, because a swing gate would need to fight gravity on every cycle. A cantilever sliding gate, the style that does not rely on a ground track, starts around $6,500 installed with automation. We see these most often on lots that back up to wooded creek beds and have tighter driveway approaches. The concrete pad for the gate’s carrier rollers has to be poured below the active clay line, and we include that in every sliding gate quote rather than discovering it mid-job.
Swing Gate Installation
Swing gates remain the standard in Colleyville, and our installation work here is dominated by custom ornamental iron swing gates on new or reset posts. A single swing gate with a new Viking or DoorKing operator starts around $3,200; a double swing with operators on both leaves starts around $5,800. The gate panel itself is the visible part, but the post work underneath is what determines whether the gate still operates correctly after a North Texas winter. We set every post below the active soil zone and photograph the footing depth before the concrete goes in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Colleyville
We install and service nine major gate operators, including Viking, Ghost Controls, and DoorKing, which means we do not need to steer you toward a single brand or push a replacement when your existing motor is repairable. On Colleyville installs specifically, we keep a local stock of common control boards, limit switches, and photo-eyes for the older Viking and Elite units that are still running on many of the original estate gates here. That shortens turnaround meaningfully when your gate is down and the driveway is blocked. Every operator we install is matched to the gate’s weight and leaf length, not just sold as whatever happens to be on the truck.
Common Gate Installation Problems We See in Colleyville Homes
- Post footings set too shallow for Colleyville’s expansive clay. Blackland Prairie clay shrinks and swells dramatically with wet-dry cycles. Footings poured only 18 or 24 inches deep will heave within the first year, throwing gate geometry out and causing the gate to drag on driveway pavers. We set footings below the active soil zone and photograph the depth before concrete is poured.
- Legacy gates missing UL 325 entrapment protection. Many 20- to 35-year-old estate gates in Colleyville were installed before modern safety sensor requirements took effect. Those gates have no photo-eyes or contact edges, which is dangerous and non-compliant. We retrofit entrapment protection on every installation, including full replacements.
- New operators burning out on heaved gates. A technician replaces the motor but never checks whether the post itself has drifted. The new motor strains against misaligned hinges and fails within a season. We see this on gates throughout Colleyville’s older sections, where clay movement has been working on those pillars for decades.
- Wrought iron fatigue at the hinge welds. The wet-dry cycle in North Texas does not just move posts, it also flexes the gate’s frame. Welds at the hinge leaves crack over time, which is why a gate that suddenly starts scraping after years of working may not need a new automation system at all. It may need the hinge geometry reset and new weld work on the original panel.
Pricing for Gate Installation in Colleyville, TX
Here are the price ranges we quote for Colleyville work, based on what we have installed across the city in the past several years:
- Single swing gate with new hinge posts set below active clay: $3,200 to $5,500
- Double swing gate with operators on both leaves: $5,800 to $9,400
- Cantilever sliding gate with automation: $6,500 to $11,000
- Pedestrian gate with keypad access: $1,800 to $3,400
- Full security gate with vehicle detection loops and photo-eyes: $8,500 to $14,000
What moves the number: gate width and leaf weight, whether existing footings can be reused, the operator brand you choose, and whether we need to match custom ornamental iron that was fabricated decades ago. Matching an original iron pattern from a 1990s Colleyville build is more expensive than a clean modern design. You always get the written price before any work starts, and you are never billed above that number unless you add scope in writing.
One more thing worth knowing: if you have a written estimate from another company, we will review it at no cost as a free second opinion. Bring the paperwork and we will tell you honestly whether the work is needed and whether the price is fair for Colleyville. Call (928) 260-0864 for an exact quote on your gate.
The Colleyville Soil Problem: Why Gates Fail Here More Than in Euless or Hurst
Colleyville sits almost entirely on Blackland Prairie clay, a soil that expands when wet and contracts when dry with enough force to move concrete. Neighboring cities like Euless and Hurst sit on a mix of soils, and while they share the same climate, their gates do not move as much because their clay layer is not as deep or as expansive. Colleyville’s estate lots, with their half-acre and larger footprints, have more room for the clay to shift laterally, and the older the gate, the more cycles of expansion and contraction it has already endured.
We reset the hinge posts on a custom ornamental iron swing gate off Cheek-Sparger Road where decades of clay movement had thrown the gate geometry so far out that the new LiftMaster operator was stalling against the pavers. Our crew dug back the post footings, re-poured them below the active soil zone, and re-hung the gate with new heavy-duty hinges before dialing in travel limits and safety photocells. No more drag, no callback the following wet spring.
That kind of post-alignment work is the single most common thing we do on otherwise healthy Colleyville gates. It looks like an operator failure. It is not. The motor was fine. The soil had moved the entire hinge plane.
We Also Serve Cities Near Colleyville
Our gate installation crews cover Colleyville and the surrounding communities of Bedford, Euless, Southlake, and Hurst. If you are just outside Colleyville city limits, we can reach you with the same crew and the same written-pricing standard. Call (928) 260-0864 and tell us your cross streets.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Colleyville
The operator is likely fine and the post is out of plumb. Colleyville’s expansive clay heaves post footings over time, and a new motor can’t fix geometry that drifted years ago. The fix is resetting the post footing below the active soil zone and re-hanging the gate on new hinges, which costs $1,200 to $2,800 depending on whether one post or both need to be re-poured. Call (928) 260-0864 for an assessment, and we’ll check the post alignment before recommending any motor work.
Yes, in most cases. A legacy control board can be replaced with a modern unit that supports photo-eyes, contact edges, and battery backup without touching the gate panel or operator arm. Retrofit costs in Colleyville typically run $800 to $1,600 per gate. If the board is so obsolete that replacement parts are no longer manufactured, a new operator install runs $1,800 to $3,400 depending on brand. We’ll tell you which path is cheaper before you commit.
Colleyville sits on a deeper and more expansive layer of Blackland Prairie clay than its neighbors, and the city’s estate lots give that clay more lateral room to move. Add in the heavier ornamental iron gates mounted on those lots, and post heaving is more common here than in Euless or Hurst. The practical takeaway: if a gate in Colleyville is dragging or binding, the post alignment is the first suspect, not the motor.
If the panel is sagging because the post itself has drifted, replacing only the panel just moves the same stress to new steel. In Colleyville, sagging gates are usually a post or hinge problem, and replacing the panel without resetting the post means the new gate will sag within a year or two. We quote the post work and the panel work separately so you can see what each piece costs, and we’ll tell you honestly if the existing panel can be salvaged with new hinge work.
If the motor runs but the gate binds, the operator may be fine and the problem is mechanical. If the motor runs but does not move the gate, check the gearbox or the limit switch. If the motor hums and trips a breaker, the operator is likely done. A replacement operator for a Colleyville estate gate runs $1,800 to $3,400 installed, while a simple control board retrofit runs $800 to $1,600. We’ll diagnose the issue, give you the written price for whichever fix is needed, and never push a replacement when a repair is the cheaper answer. Call (928) 260-0864 and we’ll talk through what you’re seeing.
Get Your Colleyville Gate Installation Quote in Writing
If you live in Colleyville and you are thinking about replacing an old gate, adding a security gate, or finally fixing the one that drags across your driveway, call us at (928) 260-0864. We serve the entire Colleyville area from our Dallas-Fort Worth dispatch office, and we will give you a written price before any work begins. No call-for-a-quote runaround. No surprise invoice at the end. Just the number, in writing, before the first tool comes off the truck.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Colleyville and the surrounding metro since 2014.