Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Antioch
A new gate installation in Antioch typically runs $2,800 to $9,500 depending on whether you need a single swing gate, a sliding gate, or a full driveway system with automation. We complete most swing and pedestrian gate installations in one to two days once materials arrive, and sliding gate work usually takes two to three days including the post footings and track bed. If you’re calling from the Deer Valley Road corridor, the Hillcrest area, or anywhere else in Antioch, call (928) 260-0864 and a live person answers, day or night.
The gates we see across Antioch are mostly from the city’s 1995-2005 buildout, and many of them are tired. Wrought iron with rust creeping up from the bottom hinge. Slide operators with control boards that are no longer manufactured. Posts that have drifted out of plumb in the clay-heavy soil. Our Gate Installation team knows what’s underneath a typical Antioch gate because we’ve pulled enough of them apart to see the pattern. We’re not guessing at the problem from across town.
Why Vance Gate Repair Is Antioch’s Preferred Gate Installation Company
We put every installation in writing before the first tool comes off the truck. That’s not a sales line. It’s Clause 1 of the Haven Standard that Adrian Vance built the company on back in 2014: the price is handed to you in writing, and it doesn’t change after the work starts. You’ll also get a photo record of what we found, what we set, and what we installed, left with you at the end of the job. No other gate company we know of in Antioch works that way.
Our technicians arrive in uniform, background-checked, with their name and photo sent to you before they show up. For Antioch, that matters. You want to know who’s pulling up to your driveway, especially if you live in a gated community near Lone Tree Way where access requires coordination with an HOA.
The work itself follows a documentation habit Adrian developed doing commercial access-control jobs starting in 2014: wiring diagrams, limit-switch readings, photographed settings. When we install a gate in Antioch, the next technician who works on it, whether that’s us in five years or another company, won’t have to guess at anything. The record’s there. Our customers across Antioch regularly tell us the paperwork was the deciding factor, more than price.
Our Gate Installation Services in Antioch
Driveway Gate Installation
Most Antioch driveway gate installations are replacing a 15-to-25-year-old gate that’s either rusted through at the hinge, sagging badly, or paired with an operator that failed years ago and was never repaired. We install new steel and aluminum driveway gates sized to your existing opening, or we reframe the opening if you want a wider vehicle pass. A standard single-leaf driveway gate with a new operator in Antioch typically runs $3,400 to $6,800 installed, depending on width and whether we need to pour new post footings. You’ll get a written price before anything starts, and that price includes the photo documentation and the 365-day promise on the install.
Pedestrian Gate Installation
Sideyard pedestrian gates in Antioch take a beating from the heat. The dry summers crack wooden frames, and the delta humidity accelerates rust on steel hardware. We install pedestrian gates in wood, steel, and aluminum, and we set every post in concrete with proper drainage so the post doesn’t sit in water all winter. A typical pedestrian gate replacement in the Antioch market runs $1,100 to $2,400 depending on material and whether we’re reusing the existing post or setting new ones.
Sliding Gate Installation
Sliding gates are the workhorse of Antioch’s HOA neighborhoods. The Deer Valley and Lone Tree Way subdivisions built during the 2000s boom put automated slide gates on hundreds of shared driveways, and those systems are now reaching the end of their service life together. We install cantilever and V-track slide gates with the correct rack and pinion, safety photocells, and operators sized for the gate’s weight and cycle count. A new residential sliding gate with automation in Antioch typically runs $4,800 to $9,500. The spread depends on gate length, whether the existing track can be salvaged, and whether we need to upgrade the electrical feed.
Swing Gate Installation
Swing gates are common on the older and mid-era Antioch properties, especially single-family homes with double-width driveways off streets like Hillcrest Avenue and the neighborhoods around Gentrytown. The delta breeze shoves against a double swing gate all summer, and that constant lateral load works the hinge posts loose faster than you’d see in, say, Concord or Walnut Creek. When we install a swing gate in Antioch, we set the posts deeper and use heavier-gauge hinge hardware than the original build, because we know what the afternoon wind does. A single swing gate with automation in Antioch runs $2,800 to $5,200. A double swing gate starts around $4,200 and goes up with gate width and whether we need to add or replace a post.
We also handle security gate installation for properties that need more than a standard residential gate, whether that’s heavier steel construction, keypad or intercom entry, or integration with an existing access-control system. Tell us what you’re trying to keep out and what you need to get in, and we’ll build the gate to match.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Antioch
If your old operator is a Ghost Controls, a DoorKing, or an Elite, we can usually work with it, and we stock common parts for those brands to keep your Antioch installation moving instead of waiting on a supplier. We also regularly install LiftMaster LA500 operators on slide gates in the Antioch area, including retrofits where the original Viking or Mighty Mule unit has finally failed. We service nine major automation brands in total. The point is that we won’t pressure you to replace a motor that can still be saved. If the control board is obsolete and no aftermarket replacement exists, we’ll tell you that directly and show you the part number that’s no longer available. Then you decide.
Common Gate Installation Problems We See in Antioch Homes
- Obsolete control boards on early-2000s slide operators. Gates installed all at once in the Deer Valley and Lone Tree Way subdivisions are failing in clusters because the manufacturers stopped producing the control boards years ago. When the board dies, you can’t buy an exact replacement. The honest options are an aftermarket retrofit if one exists for your operator, or a full operator replacement.
- Hinge post corrosion and gate sag. Delta humidity and summer heat cycling work on the steel down at the bottom of the gate. The paint chips, the post sweats, rust forms inside the weld seam. The gate sags, the rack pulls out of alignment on a slide gate, or the swing leaf drags on the ground. We see this constantly in Antioch, and we fix it by correcting the sag and treating or replacing the post, not by shimming the hinge and hoping.
- Safety upgrades triggered by repairs. Many Antioch gates were hung before the UL 325 entrapment-protection standards took effect. If we touch a pre-UL gate for any structural work, we’re required to bring it into compliance. That means adding photo-eyes or edge sensors. The gate can’t legally stay the way it was. We’ll show you the specific requirement during the estimate.
- Rack and pinion wear from delta-breeze misalignment. The afternoon wind off the Carquinez Strait flexes long slide gates, and a gate that’s even slightly misaligned wears the rack and pinion unevenly. By the time a slide gate starts jerking or grinding in Antioch, the rack usually needs section replacement, not just an operator adjustment.
Pricing for Gate Installation in Antioch, CA
Here’s what we’re seeing in the Antioch market right now. A single swing gate with automation: $2,800 to $5,200. A sliding gate with a new operator, track work, and safety photocells: $4,800 to $9,500. A pedestrian gate replacement: $1,100 to $2,400. A full security gate retrofit with heavier steel and access control lands at $6,000 and up. These are installed prices, written down and handed to you before we start. The actual number moves with gate width, post condition, electrical work, and whether the old track or hinges can be reused. Call (928) 260-0864 and we’ll come out, measure, and put a fixed number on paper. The estimate is free.
We Also Serve Cities Near Antioch
Our coverage area reaches Antioch neighbors in Oakley, Pittsburg, Brentwood, Concord and the surrounding East Contra Costa communities. If you’re a few miles outside Antioch proper, call anyway. We dispatch to the whole area and we’ll tell you straight if we can get to your property on the schedule you need.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Antioch
Sometimes, but not usually. Many early-2000s slide gate operators in Antioch’s HOA neighborhoods were built with control boards that the manufacturers no longer produce. If an exact replacement or a compatible aftermarket board exists, we’ll install it and photograph the board, the wiring, and the settings before we leave. If no board exists, replacing just the motor won’t fix an obsolete control system, and the honest fix is a full operator retrofit. We’ve done plenty of these in the Deer Valley corridor, and we’ll show you what’s actually on the gate before you spend anything. Call (928) 260-0864 and we’ll take a look.
The afternoon delta breeze off the Carquinez Strait pushes against a double swing gate all summer, applying constant lateral load to the hinge posts. Over time that load works the posts loose in the soil and accelerates wear at the hinge welds. In Antioch we set new posts deeper and use heavier hinge hardware than the original installers did, because the wind here is different from what you’d get 20 miles west in the Bay Area proper. A gate that’s been leaning for a couple of years often needs post resetting, not just new hinges. We’ll show you the movement with the gate open and closed so you can see what we’re seeing.
Yes, and it’s specific to how Antioch was built. The Deer Valley and Lone Tree Way subdivisions went up during the 2000s boom, and the developers installed automated slide-gate operators on shared driveways all within a few years of each other. Those operators are now hitting end-of-service life together, which means one neighborhood can generate multiple simultaneous failures. That pattern doesn’t show up much in Walnut Creek or Concord. It’s a function of Antioch’s buildout timeline. If your HOA is seeing several gates fail in the same year, we can assess the entire community’s gate infrastructure and give the board a written plan for phased replacement.
If the gate falls under current UL 325 requirements and we’re performing structural or operator work on it, yes, you do. Gates installed before the modern entrapment-protection standards often lack photo-eyes or edge sensors. We can’t legally leave a gate in that condition after we’ve modified it. The photocell or edge sensor cost is part of the written estimate you’ll get before we start, not an add-on you discover at the end. Every new operator we install includes the required entrapment protection, documented and photographed.
It depends on where the rust is. Rust at the bottom hinge or the post base can often be cut out and the section replaced, and we can correct the sag. Rust inside the frame itself, especially where the gate bar meets the post, usually means the structural steel is compromised, and replacement is cheaper than trying to weld to metal that’s losing its thickness. We’ll show you the rust locations and tell you straight which way to go, even when the honest answer is that a new gate costs less than saving the old one. Call (928) 260-0864 for a free measure and a written price.
Get Your Antioch Gate Installation Started
If you’re in Antioch and your gate is leaning, rusted, or running on an operator that should have been retired years ago, call (928) 260-0864. A live person answers, 24 hours a day. We’ll set a time to come out, measure the opening, check the posts and the electrical, and hand you a written price before any work begins. Every installation includes a documented photo record and the 365-Day Done Right Promise. If it’s not right, we make it right, no argument, no fee, for a full year.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Antioch and the East Contra Costa area since 2014.
Gate Installation in Nearby Areas