Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Mount Juliet, TN
Gate repair in Mount Juliet, TN usually means one thing: a builder-installed automated gate from the 2000s-to-2020s subdivision boom has finally pushed its original motor or control board past the failure threshold. We repair more LiftMaster and Ghost Controls operators in Mount Juliet than any other manufacturer by a wide margin, because several developers along the Lebanon Pike corridor specified the same packages in the same window. Call (928) 260-0864 if your gate is grinding, refusing to open, or reversing mid-travel.
Why Mount Juliet Homes Are Different
Mount Juliet is not a city of century-old ironwork. The housing stock skews heavily toward master-planned subdivisions built between 2000 and 2025, and nearly every automated gate in those neighborhoods is an ornamental iron or aluminum swing gate running a modern DC motor with a control board and safety photo-eyes. That means the repair work here is almost exclusively about electronics, limit switches, and motor capacitors, not rusted hinges or sagging wooden frames.
The climate does the damage Middle Tennessee ice storms load gate panels and arms with a frozen crust that stalls motors and cracks circuit boards, and the humid summers corrode the wiring connections inside outdoor-mounted control boxes. A gate that worked fine in March can fail badly in July simply because a connector finally oxidized through. Ice loading is the reason we see bent hinge brackets and sheared arm bolts in Mount Juliet more than any other failure mode aside from logic board breakdowns.
The real quirk of Mount Juliet is sameness. Several subdivisions along the US-70 corridor were built by the same developers using the same operator packages in the same 2005 to 2015 window. When we find a failed limit switch in one neighborhood, we routinely find the identical limit switch failing one street over. That repetition shortens diagnosis time considerably, because we already know what the gate looked like when it was installed and how it fails in this climate.
Our Main Mount Juliet Services
These are the two pages Mount Juliet homeowners use most often. One covers repair and diagnosis of an existing gate, and the other covers building a new gate from the ground up.
Gate Repair in Mount Juliet
Most Mount Juliet gate problems come down to a dead motor, a shorted control board, a misaligned photo-eye, or a bent hinge bracket. We inspect the operator, the arm, the track or hinge points, and the safety loop, then hand you a written price before any work begins. Under The Haven Standard, every repair leaves behind a photo record of what we found and what we set. Gate Repair in Mount Juliet covers the full repair scope and the specific failure patterns we see along Lebanon Pike and beyond.
Gate Installation in Mount Juliet
New installation in Mount Juliet normally means a swing gate on an ornamental iron frame, with a motor selected for the gate’s width and weight plus the humidity and ice exposure a Middle Tennessee operator has to survive. We quote the gate, the motor, the safety edges, the power run, and the concrete work as separate line items so the written price matches what gets built. Gate Installation in Mount Juliet walks through materials, motor options, and the permit conversation with Wilson County.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Mount Juliet
Gate motor and opener work in Mount Juliet is dominated by one pattern: a LiftMaster or Ghost Controls operator installed between 2005 and 2015 has reached the end of its control board or limit switch life, and the gate is now dead, grinding, or reversing at random. The ice storms accelerate this by sending a surge through the board when the motor tries to push against a frozen panel. Our Gate Motor & Opener team replaces or repairs the motor, the board, or both, and leaves a written record of every setting we touched.
Motor Repair
Signs you need it
The gate hums but does not move, opens slower than it used to, or trips the breaker repeatedly.
What it costs in Mount Juliet
Motor repair in Mount Juliet typically runs $180 to $420 depending on whether the capacitor, brushes, or wiring harness is the failed component.
How we do it
We open the operator housing, test the capacitor and run windings, replace the failed part, and photograph the new readings before closing it back up.
Motor Installation
Signs you need it
The old motor has seized, burned out, or is undersized for a gate that was upgraded to a heavier material.
What it costs in Mount Juliet
A full motor installation on a Mount Juliet swing gate runs $650 to $1,800 depending on the brand, gate weight, and whether the arm bracket is reusable.
How we do it
We remove the old operator, mount the new motor to the existing bracket or a new bracket, set the travel limits, and test the safety loop before we leave.
Linear Motor
Signs you need it
The gate travels partway and stops, or the arm extends but the gate barely moves because the actuator threads are stripped.
What it costs in Mount Juliet
Linear motor actuator replacement in Mount Juliet typically lands between $500 and $1,100 including the part, labor, and limit reset.
How we do it
We unhook the actuator, fit the replacement to the gate’s throw distance, set the open and close positions, and photograph the new limit settings.
Slide Motor
Signs you need it
The gate stutters when it moves, coasts past the limit, or the gear is visibly worn down to nubs.
What it costs in Mount Juliet
Slide motor replacement for a Mount Juliet cantilever or V-track gate runs $700 to $1,900 depending on the gate’s length and the existing rack condition.
How we do it
We pull the old motor, set the new one against the rack, adjust the gear engagement, and run the gate through two full cycles with the photo-eye in place.
Intercom Integration
Signs you need it
The motor works fine, but the intercom no longer triggers the gate or the call quality has degraded to uselessness.
What it costs in Mount Juliet
Wiring a new intercom into an existing gate operator in Mount Juliet typically runs $250 to $500, excluding the intercom hardware itself.
How we do it
We trace the trigger wires from the intercom base station to the operator control board, land clean connections, and test the open command before we leave.
What Gate Motor & Opener Costs in Mount Juliet
| Item | Typical range in Mount Juliet |
|---|---|
| Motor repair | $180 - $420 |
| Motor installation | $650 - $1,800 |
| Linear motor replacement | $500 - $1,100 |
| Slide motor replacement | $700 - $1,900 |
Can you replace a gate motor the same day in Mount Juliet?
Yes, in most cases. If the motor is a common LiftMaster, Ghost Controls, or Linear unit, we can often complete the swap the same day we diagnose it. The price is written before we start, and the photo record is handed over before we leave.
Why did my gate motor fail after an ice storm in Mount Juliet?
Ice loading stalls the motor while it is trying to push the gate, which over-currents the control board and burns out capacitors or the board itself. The freeze happens first, then the electrical failure follows. Call us at (928) 260-0864 and we will diagnose the exact point of failure.
Gate Access Control in Mount Juliet
Gate access control in Mount Juliet usually means a keypad and telephone entry system mounted beside a subdivision or driveway gate that has stopped talking to the operator. The humid summers corrode the wiring connectors inside the control pedestal, and the freeze-thaw cycles crack the silicone seals that are supposed to keep water out of the keypad circuit. Our Gate Access Control work covers the entry hardware, the wiring to the motor, and the programming that makes the gate open when the right code or call is received.
Keypad Entry
Signs you need it
The keypad does not light, the code works only sometimes, or the keys have to be pressed hard enough to bruise a finger.
What it costs in Mount Juliet
Replacing a keypad entry system in Mount Juliet runs $200 to $450 including the new keypad, wiring check, and programming.
How we do it
We pull the old keypad, inspect the wiring for corrosion, install the new unit, program the access code, and test the trigger at the operator board.
Remote Control
Signs you need it
The remote only opens the gate from ten feet away, or it has stopped triggering the motor entirely despite a fresh battery.
What it costs in Mount Juliet
Adding or reprogramming a remote control in Mount Juliet typically costs $75 to $200 including the transmitter and receiver programming.
How we do it
We pair the new remote or re-pair the existing one to the receiver, verify the range at the end of the driveway, and document the programmed frequency.
Phone Entry
Signs you need it
The call rings through but the gate does not open, or callers report the line drops before the dial tone even finishes.
What it costs in Mount Juliet
Phone entry installation or repair in Mount Juliet runs $300 to $700 depending on whether the existing wiring can be reused or a cellular unit is required.
How we do it
We test the phone line at the control pedestal, replace or reprogram the entry unit, and confirm the open command reaches the operator board.
Card Reader
Signs you need it
The card reader flashes but never accepts a valid card, or it accepts the card but the gate ignores the command.
What it costs in Mount Juliet
Card reader replacement or repair in Mount Juliet typically lands between $250 and $600 including the reader, wiring, and programming.
How we do it
We check the power supply and data line to the reader, replace the reader or the failed board, and test a known-good credential several times.
Video Intercom
Signs you need it
The video feed is black, the audio is one-way, or the screen shows the driveway but the button does not open the gate.
What it costs in Mount Juliet
Video intercom integration with a Mount Juliet gate operator runs $500 to $1,200 depending on the camera type and whether new cable must be pulled.
How we do it
We mount or replace the camera, run or repair the video and trigger cables, and verify both the picture and the gate command work together.
What Gate Access Control Costs in Mount Juliet
| Item | Typical range in Mount Juliet |
|---|---|
| Keypad entry replacement | $200 - $450 |
| Remote control programming | $75 - $200 |
| Phone entry system | $300 - $700 |
| Card reader | $250 - $600 |
| Video intercom | $500 - $1,200 |
Can you program a keypad to work with an older gate motor in Mount Juliet?
Yes. Most older LiftMaster and Ghost Controls operators accept a wired keypad input, and we carry adapters for the board types that do not. The price is written before we begin, and the programming is tested in front of you before we leave.
Why does my gate access system fail after every thunderstorm in Mount Juliet?
Humidity and lightning surges are the two culprits. Outdoor control boxes in Mount Juliet trap moisture against the terminals, and a nearby strike will jump the keypad or phone entry board. Call (928) 260-0864 and we will test the surge path and the connection points.
Gate Parts & Welding in Mount Juliet
Gate parts and welding in Mount Juliet is mostly hinge brackets, gate rollers, and bent post work caused by ice storms and the slow sag of ornamental iron under humid Tennessee air. Aluminum and iron gates both fail at the connection points first: the hinge welds crack, the post base rusts, the roller bearings seize. Our Gate Parts & Welding work covers the structural piece of the repair, so the new motor we install is not carrying a gate that is about to tear itself off its hinges.
Hinge Replacement
Signs you need it
The gate tilts toward the latch side, the top hinge gap is visibly wider than the bottom, or the gate scrapes the ground on the swing.
What it costs in Mount Juliet
Hinge replacement on a Mount Juliet ornamental iron gate runs $120 to $300 per hinge depending on the weight of the gate and how much cleanup welding is required.
How we do it
We cut the old hinge free, weld the new hinge in place at the correct angle, and photograph the finished weld for the job record.
Post Replacement
Signs you need it
The post is leaning, the concrete base is cracked, or the gate sags no matter how many times the hinges are adjusted.
What it costs in Mount Juliet
Post replacement in Mount Juliet runs $450 to $1,100 depending on the post size, whether it is set in concrete or bolted, and whether the gate must be removed during the work.
How we do it
We brace the gate, remove the old post, set the new one in concrete at the correct plumb, and rehang the gate after the concrete cures enough to hold load.
Rail Repair
Signs you need it
The top or bottom rail is cracked at a weld joint, or the gate has bowed visibly in the middle of the frame.
What it costs in Mount Juliet
Rail repair on a Mount Juliet gate frame typically costs $180 to $400 depending on the length of the crack and whether the gate must be taken down to weld it properly.
How we do it
We grind the crack clean, weld the rail back to the vertical stile, and grind the repair flush so the gate keeps its original profile.
Custom Welding
Signs you need it
The gate needs a new bracket, a reworked latch, a stiffener plate, or a mounting point that is not a stock part.
What it costs in Mount Juliet
Custom fabrication and welding in Mount Juliet runs $120 to $500 depending on the complexity of the piece and the material thickness.
How we do it
We measure the part on site, cut and weld the replacement, then test the fit and photograph the finished piece before reinstalling anything.
Gate Rollers
Signs you need it
The slide gate jerks instead of glides, the rollers are worn flat on one side, or the gate has started to grind against the track.
What it costs in Mount Juliet
Gate roller replacement in Mount Juliet typically runs $150 to $350 per set depending on the roller diameter and whether the track is salvageable.
How we do it
We jack the gate up, swap the worn rollers, adjust the height so the gate sits square on the track, and run it through a full open-close cycle.
What Gate Parts & Welding Costs in Mount Juliet
| Item | Typical range in Mount Juliet |
|---|---|
| Hinge replacement | $120 - $300 per hinge |
| Post replacement | $450 - $1,100 |
| Rail repair | $180 - $400 |
| Custom welding | $120 - $500 |
| Gate rollers | $150 - $350 per set |
Can you weld a gate back together in Mount Juliet if it broke at the hinge?
Yes, and in most cases we can do it without removing the gate. We grind the break, weld the hinge back to the frame, and photograph the repair. The price is written before the welder is ever plugged in.
How fast can you get gate parts in Mount Juliet?
Common hinge brackets, rollers, and control boards are stocked in our service vehicles. Parts that must be ordered, like a specific FAAC or BFT motor, typically arrive in three to five business days. Call (928) 260-0864 and we will tell you if the part is already on the truck.
Brands We Service in Mount Juliet
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards, capacitors, and remotes for LiftMaster and Ghost Controls in the truck because those are the two most common operators in Mount Juliet. Most repairs do not wait on a parts order. Our brands page lists the full line and what we carry for each.
Pricing for Gate Repair in Mount Juliet, TN
| Service | Typical range in Mount Juliet |
|---|---|
| Motor repair | $180 - $420 |
| Motor installation | $650 - $1,800 |
| Linear motor replacement | $500 - $1,100 |
| Slide motor replacement | $700 - $1,900 |
| Keypad entry replacement | $200 - $450 |
| Remote control programming | $75 - $200 |
| Phone entry system | $300 - $700 |
| Card reader | $250 - $600 |
| Video intercom | $500 - $1,200 |
| Hinge replacement | $120 - $300 per hinge |
| Post replacement | $450 - $1,100 |
| Gate rollers | $150 - $350 per set |
The price drivers in Mount Juliet are ice damage, rusted hardware, and the cost of reaching a subdivision entrance gate that was poured-in during the building boom and now sits behind a HOA’s landscaping decision. Whatever the number is, it goes on paper before we start, and the photo record is part of the job at no extra charge.
Neighborhoods We Serve in Mount Juliet
We run service calls all over Mount Juliet, from the master-planned subdivisions along Lebanon Pike and US-70 to the newer cul-de-sac communities back toward the lake. Response time for a gate that will not open is usually the same day, depending on the time of the call and where the nearest truck is working at that moment.
- Willoughby Station
- Providence
- Jackson Hills
- Kelsey Glen
- Walnut Ridge
Service Area - Cities Near Mount Juliet
Vance Gate Repair covers Mount Juliet and the surrounding Middle Tennessee communities. If you are in Hendersonville, TN, Lebanon, OH, La Vergne, TN, or Gallatin, TN, the same written-price and photo-record standard applies, and the nearest available technician will be dispatched.
Serving Mount Juliet, TN - Our Local Coverage Area
We’re based in the Mount Juliet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mount Juliet
Most gate repairs, including motor replacement and hinge welding, do not require a permit in Mount Juliet. New gate installations may require one depending on the location and setback, and we check that with Wilson County before the first hole is dug.
Same-day response is common in Mount Juliet for a gate that will not open or close, particularly if the call comes in during the morning. The dispatcher at (928) 260-0864 will give you a direct answer rather than a callback window.
Yes. HOA-gated entrances along the US-70 corridor make up a large share of Mount Juliet gate work. We coordinate with the property manager or HOA board, provide the written quote for review, and deliver the same photo documentation to the board that a homeowner would receive.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mount Juliet Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.