Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in La Vergne, TN
Gate motor and opener service in La Vergne deals with two very different animals. On one side are the high-cycle warehouse gates along Industrial Drive and Murfreesboro Road that run 50 to 150 cycles a day and chew through circuit boards on a two to three year rotation. On the other are the HOA entrance gates and aluminum driveway gates in the subdivisions built between the mid-1990s and 2010s, most of which are now hitting the end of their 15 to 20 year operator lifespan at roughly the same time. Call (928) 260-0864 and a live person answers, any hour.
Why La Vergne Homes Are Different
La Vergne sits low, and the winter ice events that roll through Middle Tennessee hit the flats here harder than the surrounding elevations. When a December cold snap glazes gate tracks and hinge pins, then drops temperatures enough to thermal-contract powder-coated aluminum pickets, the failure mode is predictable: snapped pickets, bound operator gears, and photo-eyes knocked out of alignment by ice heave. We see this concentrated between late December and February, and it is rarely a single problem. A gate that will not open after an ice event usually has two or three things wrong at once.
The summer brings the opposite problem. Heat and humidity accelerate UV cracking in operator wiring, and steel frames that were installed without enough seasonal clearance bind as they expand. La Vergne’s residential stock leans heavily toward planned subdivisions along Jefferson Pike and Waldron Road, where ornamental single-point entry gates were standard in builder packages. Those gates are now aging past their operator lifespan together, which means a lot of La Vergne homeowners are hearing the same grinding noise for the first time in the same year. The good news is that the repair pattern is consistent, and we know what to look for before we arrive.
Our Main La Vergne Services
Most La Vergne calls come in for one of two things: a gate that has stopped working entirely, or a gate that is being installed for the first time. Here is how each works in this city.
Gate Repair in La Vergne
Repair work in La Vergne spans everything from a sheared hinge pin on a decorative aluminum driveway gate to a blown drive gear on a commercial slide operator off Industrial Drive. We diagnose the mechanical and electrical sides together, because on aging gates one usually damaged the other. Every repair includes a written price before work starts and a photo record of what we found and what we replaced. Learn more on our Gate Repair in La Vergne page.
Gate Installation in La Vergne
New installations in La Vergne have to account for two local realities: the winter ice that will glaze whatever you install, and the thermal expansion of hot, humid summers. We measure for seasonal clearance, set posts below frost depth, and spec operators rated for the cycle count your gate will actually see. That is a different calculation for a quiet cul-de-sac on Waldron Road than for a warehouse apron off I-24. See the full breakdown on our Gate Installation in La Vergne page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in La Vergne
Gate motor and opener work in La Vergne skews toward two failure patterns. In the residential subdivisions off Jefferson Pike, operators from the mid-2000s housing boom are reaching the end of their service life at the same time, so capacitor failures, worn limit switches, and stripped drive gears are common. In the industrial parks off Murfreesboro Road, warehouse gates run a year’s worth of residential cycles in a month, and circuit boards and drive gears fail on a two to three year rotation instead of the residential ten to fifteen year norm. We service nine automation brands including Ghost Controls, DoorKing, and Elite, and we write the price down before we touch a single wire. That is the core of our Gate Motor & Opener service.
Motor Repair
Signs you need it
The gate hums but does not move, moves at half speed, or stops mid-travel and reverses.
What it costs in La Vergne
Most motor repairs in La Vergne run $175 to $450, depending on whether we are replacing a capacitor, a limit switch, or a drive gear.
How we do it
We open the operator housing, test the capacitor and limit switch readings against the motor’s nameplate spec, replace the failed component, and photograph the new part number and settings before closing it back up.
Motor Installation
Signs you need it
The operator is over 15 years old and repair parts for that model are no longer manufactured, or the motor has seized after an ice event.
What it costs in La Vergne
A full operator replacement in La Vergne typically runs $650 to $1,400, depending on whether it is a swing-arm or slide-style motor and whether the existing mounting plate is reusable.
How we do it
We pull the old operator, check the gate’s weight and travel distance against the new motor’s rating, mount and wire the replacement, then set and record the open and close limits so the next technician can see exactly where they were set.
What Gate Motor & Opener Costs in La Vergne
| Item | Typical range in La Vergne |
|---|---|
| Motor repair (capacitor, limit switch, gear) | $175-$450 |
| Full operator replacement | $650-$1,400 |
| Service call and diagnostic (waived with repair) | $65-$95 |
Can you fix a gate motor the same day in La Vergne?
Yes, in most cases. We stock common LiftMaster, Ghost Controls, and DoorKing parts on the trucks, and a failed capacitor or limit switch is usually a same-visit repair. Call (928) 260-0864 and we will tell you what the truck has before we dispatch.
Do you service commercial warehouse gate operators in La Vergne?
Yes. The industrial parks off Murfreesboro Road and Industrial Drive are a major part of our La Vergne work, and we quote annual maintenance contracts for high-cycle operators. Most commercial slide-gate motor replacements run $850 to $1,400 depending on horsepower.
Gate Access Control in La Vergne
Access control in La Vergne splits along the same line as everything else here. HOA entrance gates in the subdivisions need keypad and phone entry systems that can survive ice-glazed keypad membranes and UV-brittle wiring. Warehouse gates along the I-24 corridor need card readers and video intercoms rated for high cycle counts and truck traffic. We install and repair all of it, and every job leaves a documented wiring diagram so a future technician does not have to trace the circuit from scratch. Our full Gate Access Control service covers the commercial and residential sides equally.
Keypad Entry
Signs you need it
The keypad is unresponsive, only works in certain temperatures, or the buttons stick and keypresses register twice.
What it costs in La Vergne
Keypad replacement or repair in La Vergne typically runs $185 to $420, including programming and weather sealing.
How we do it
We pull the old keypad, check the wiring for UV cracking or moisture intrusion, mount the new unit with a sealed gasket, program the codes, and photograph the final wiring connections.
Video Intercom
Signs you need it
The video feed is blank, the audio is scratchy or one-way, or the call button does not ring through to the house or guard station.
What it costs in La Vergne
Video intercom replacement in La Vergne runs $450 to $1,100, depending on whether the monitor and camera are hardwired or network-based.
How we do it
We test the camera, the audio pair, and the call relay separately, replace only what failed, and leave a written record of which wires go where so future troubleshooting takes minutes instead of hours.
What Gate Access Control Costs in La Vergne
| Item | Typical range in La Vergne |
|---|---|
| Keypad entry repair or replacement | $185-$420 |
| Video intercom replacement | $450-$1,100 |
| Service call and diagnostic (waived with repair) | $65-$95 |
Can you add a keypad to an existing La Vergne gate?
Yes, on most operators installed in the last 15 years. We check the control board for a spare accessory terminal, wire the keypad in, and program the codes while you watch. Most add-on keypad jobs run under $400.
Will an HOA entrance gate in La Vergne include phone entry for residents?
Most La Vergne HOAs use either a keypad-only system or a phone entry module that calls a resident’s cell when visitors press the directory number. We install both, and the phone entry unit is usually a $300 to $700 add-on to the operator.
Gate Parts & Welding in La Vergne
La Vergne’s winters snap aluminum pickets that thermal-contracted overnight, and its summers bind steel frames installed without enough seasonal clearance. Both failures eventually land in the same place: a hinge pin that sheared, a post that leans, or a rail that no longer lines up. We carry replacement hinges, rollers, and picket stock on the trucks, and we weld on site for structural repairs on both residential and commercial gates. Our Gate Parts & Welding service covers the mechanical side of the gate, not just the electronics.
Hinge Replacement
Signs you need it
The gate sags on the latch side, scrapes the ground, or the hinge pin has visible play when you lift the gate.
What it costs in La Vergne
Hinge replacement in La Vergne typically runs $120 to $350 per hinge, depending on whether the post is steel, aluminum, or masonry-embedded.
How we do it
We brace the gate, cut or unbolt the old hinge, check the post for internal corrosion where the old hinge seat was, weld or bolt the new hinge in, and adjust the gate so it swings level.
Post Replacement
Signs you need it
The gate post leans more than a few degrees, the gate drags even after hinge adjustment, or you can see cracked concrete at the post base.
What it costs in La Vergne
Post replacement in La Vergne runs $400 to $900, including setting the new post below frost depth and re-hanging the gate.
How we do it
We cut the old post at the base, break out the old footing, set a new post in fresh concrete below frost depth, and re-hang the gate once the concrete has cured enough to hold load.
What Gate Parts & Welding Costs in La Vergne
| Item | Typical range in La Vergne |
|---|---|
| Hinge replacement | $120-$350 per hinge |
| Post replacement | $400-$900 |
| On-site welding (per hour, plus materials) | $95-$150 |
Will welding fix a snapped aluminum picket on a La Vergne driveway gate?
Usually no. Powder-coated aluminum pickets that snapped from thermal contraction are better replaced than welded, because the heat of welding weakens the surrounding aluminum. We carry matching picket stock and replace the section cleanly.
Can you weld a steel gate frame on site in La Vergne?
Yes. We bring a mobile welder and do most structural steel repairs on site, including rail cracks and hinge seat rebuilds. Steel frames that bind in summer can often be corrected with a combination of welding and clearance adjustment.
Brands We Service in La Vergne
We service nine automation brands, and the La Vergne trucks carry stock for the three we see most often here: Ghost Controls, DoorKing, and Elite. Most motor and keypad parts are on the truck, which means most repairs happen on the first visit. See the full list on our brands page.
Pricing for Gate Repair in La Vergne, TN
| Service | Typical range in La Vergne |
|---|---|
| Motor repair (capacitor, limit switch, gear) | $175-$450 |
| Full operator replacement | $650-$1,400 |
| Keypad entry repair or replacement | $185-$420 |
| Video intercom replacement | $450-$1,100 |
| Hinge replacement | $120-$350 per hinge |
| Post replacement | $400-$900 |
| On-site welding | $95-$150 per hour |
| Service call and diagnostic (waived with repair) | $65-$95 |
Two things push a La Vergne gate repair price up: ice damage that affected multiple components at once, and warehouse operators that failed from sustained high cycle counts rather than a single part. Whatever the number is, you see it in writing before we start. The written price is the price.
Neighborhoods We Serve in La Vergne
We cover the full La Vergne area, from the industrial parks off Murfreesboro Road and Industrial Drive to the residential corridors along Jefferson Pike and Waldron Road. Our typical response time for gate repairs in La Vergne is same-day to next-day, depending on when you call and where the nearest truck is.
- Lake Forest
- The Villages at Lake Forest
- La Vergne Heights
- Bicentennial Park area
- Jefferson Pike corridor
Service Area - Cities Near La Vergne
We also serve the surrounding Middle Tennessee area, including Smyrna, TN to the southeast, Brentwood, TN to the southwest, Mount Juliet, TN to the northeast, and Nashville, TN to the north. Dispatch and scheduling run from our Memphis office, and crews serve La Vergne locally with trucks stocked for the brands we see most here.
Serving La Vergne, TN - Our Local Coverage Area
We’re based in the La Vergne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in La Vergne
Most La Vergne repair calls are same-day when they come in before early afternoon, and next-day otherwise. A live person answers the phone at (928) 260-0864 any hour, so you will know the dispatch window before you hang up.
Many of the planned subdivisions along Jefferson Pike and Waldron Road have HOA design standards for gate appearance, and entrance gates are usually common-area assets with their own approval process. We provide the written scope and part numbers your HOA board can review before any work begins.
Yes, and a large share of our La Vergne work is on the high-cycle slide and swing gates off Industrial Drive and Murfreesboro Road. Those operators fail on a faster rotation than residential units, and we quote annual maintenance contracts for them.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Vergne Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.