Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Houston, TX
Gate motor and opener repair in Houston usually means one of two things: a motor that failed after years of fighting humidity and clay-shifted posts, or a board that quit after a storm. Homes across Houston’s master-planned communities and older in-town estates run on swing and slide gates that face a specific mix of problems: expansive clay soil heaves posts out of alignment, and year-round moisture corrodes wiring and circuit boards faster than almost anywhere else in Texas. If your gate is grinding, stalling, or refusing to open, call (928) 260-0864 and a technician will give you a written price before any work begins.
Why Houston Homes Are Different
Houston’s “gumbo” clay is the defining factor in local gate work. During wet seasons the soil swells and lifts gate posts; during dry spells it shrinks and lets them sink. A gate that closed perfectly in March can drag across the driveway by August, not because the motor failed but because the post moved two inches off plumb. Technicians working subdivisions in southwest and northwest corridors like Alief, Copperfield, and Missouri City routinely find posts that shifted two to four inches within three to five years of installation, set during a dry season by builders who did not account for swell. No hinge adjustment holds until the post is re-plumbed or re-set with a wider concrete collar.
Humidity compounds the problem. Houston averages above 75% relative humidity year-round, which oxidizes iron and steel hardware, seizes hinges, and corrodes operator circuit boards far faster than in drier Texas metros. Flooding near the bayou network adds another layer: gate operators in low-lying areas get submerged after tropical storms, making waterproofed enclosures and post-storm electrical repair a distinct local need. Older estates in River Oaks, Memorial, and Tanglewood often carry heavier custom ironwork that needs specialized hinge and post repair rather than off-the-shelf parts.
Our Main Houston Services
Most Houston homeowners call us first for one of two jobs: fixing a gate that has stopped working, or replacing one that has reached the end of its life.
Gate Repair in Houston
Repair work in Houston means diagnosing what the clay and humidity have done. A gate that will not open may have a failed motor, a bent rail, seized hinges, or a control board corroded by condensation. We test the full system, show you what we found in writing and photos, and quote a flat price before touching a tool. The most common Houston repair calls are for swing gates whose posts have shifted and slide gates whose rollers have worn flat on one side from dragging across misaligned track. Learn what a full repair visit covers on our Gate Repair in Houston page.
Gate Installation in Houston
New installations in Houston succeed or fail based on how the posts are set. Because of the gumbo clay, we dig deeper than standard, use wider concrete collars, and account for seasonal swell before the first hinge is hung. We install ornamental iron, tubular steel, and custom gates for homes from Cinco Ranch to Sienna, and every project starts with a written scope and a fixed price. For homeowners planning a full replacement, our Gate Installation in Houston page lays out the process and the pricing structure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Houston
Most gate motor failures in Houston trace back to two local conditions: moisture intrusion into the control board and misalignment caused by shifting clay soil. Homes built after the 1970s suburban boom, especially in master-planned communities like Cinco Ranch, Sugar Land, and Pearland, carry automatic swing and slide gates that were often installed with posts set too shallow for Houston’s soil. When those posts move, the motor strains against a gate that no longer travels true, burning out gears and capacitors years before they should fail. We service nine major automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair what is already on the property rather than steering you toward a replacement. Full details on our motor work live on the Gate Motor & Opener service page.
Motor Installation
Signs you need it
The old motor has failed outright, or it is so undersized for the gate’s weight that it overheats and trips the thermal breaker on hot Houston afternoons.
What it costs in Houston
Swing-gate motor replacement in Houston typically runs $1,150 to $2,600 installed, and slide-gate motor replacement runs $1,900 to $3,900 depending on brand, gate weight, and whether the mounting plate needs modification.
How we do it
We pull the old motor, inspect the mounting plate and arm bracket for stress cracks, install the new motor with a fresh wiring run, set the limit switches, and photograph every connection before we leave.
Motor Repair
Signs you need it
The gate hums but does not move, opens a few feet and stops, or the motor runs but the gate creeps slower each week even after lubrication.
What it costs in Houston
Motor repair in Houston generally lands between $275 and $800 depending on whether we are replacing a capacitor, a limit switch, a gear set, or a combination of parts.
How we do it
We test the motor under load, identify the failed component, replace it, reset the travel limits, and document the repair with a photo log and the part number on your written record.
What Gate Motor & Opener Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Swing-gate motor replacement | $1,150 - $2,600 |
| Slide-gate motor replacement | $1,900 - $3,900 |
| Motor repair (capacitor, limit switch, gear set) | $275 - $800 |
Can you repair my existing motor instead of replacing it?
In most cases, yes. We replace the failed component rather than the whole unit whenever the motor housing is intact and the gear set is serviceable. The written quote lists exactly which parts are being replaced and why.
How fast can you get to my Houston home?
We dispatch same-day for motor failures in most Houston areas, with a live person answering the phone 24/7. Call (928) 260-0864 and we will give you a real arrival window, not a four-hour range.
Gate Access Control in Houston
Access control in Houston means more than convenience. With hundreds of HOA-managed gated subdivisions and older estates in River Oaks and Tanglewood, homeowners need keypads, remotes, and phone-entry systems that survive humidity, lightning strikes, and the occasional flood. A keypad that works only when it is dry, or an intercom that goes silent after a storm, is a common Houston call, and the fix usually involves re-sealing the enclosure and replacing a corroded board rather than replacing the whole system. We document every setting and wiring change, so the next technician does not have to guess. Our full access control work is described on the Gate Access Control service page.
Keypad Entry
Signs you need it
The keypad works intermittently in Houston’s humidity, some keys do not register, or the housing has filled with condensation and the contacts have corroded.
What it costs in Houston
Keypad replacement in Houston typically runs $225 to $500 installed, depending on the model and whether it ties into an existing operator or requires a new controller.
How we do it
We match the keypad to your operator, replace the corroded unit, seal the new housing against moisture, program the codes, and photograph the finished wiring.
Phone Entry
Signs you need it
The call rings but the gate will not open, callers report dead air, or the system works only when the cellular signal is strong, which can be unreliable in some Houston subdivisions.
What it costs in Houston
Phone entry system installation in Houston runs $500 to $1,100 for a cellular unit, including the controller interface and programming.
How we do it
We install the cellular module, wire it to the operator’s control board, program the directory, test the call-to-open function, and leave you with the administrative codes and a written wiring diagram.
What Gate Access Control Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Keypad replacement | $225 - $500 |
| Phone entry system | $500 - $1,100 |
| Control board replacement | $400 - $900 |
Will a new keypad work with my existing operator?
Almost always. We match keypads from Viking, DoorKing, Elite, and Ghost Controls to the operator you already have. If an adapter board is needed, the quote includes it in writing before we start.
Can you add phone entry without replacing my whole system?
Yes. A cellular phone-entry module ties into most existing operators without removing your keypad or remotes. We program the directory, test the relay, and leave you the wiring record. Call (928) 260-0864 for a written quote.
Gate Parts & Welding in Houston
Houston’s climate attacks gate hardware at a pace most other Texas cities never see. Hinges seize from constant humidity, rollers flatten from dragging across clay-shifted track, and steel posts rust at the weld line where water pools after every rain. In older in-town neighborhoods like River Oaks and Memorial, custom ironwork often needs hand-welded repair because the original ornamental parts are no longer manufactured. We carry structural parts in stock and weld on-site when the gate’s integrity depends on it, documenting every repair with photos and a written parts list. Full details are on the Gate Parts & Welding service page.
Hinge Replacement
Signs you need it
The gate sags visibly at the latch side, scrapes the ground when it swings, or the hinges squeal even after lubrication because the bearing surfaces have galled.
What it costs in Houston
Replacement hinges run $85 to $260 each installed in Houston, with ornamental or custom hinges at the upper end.
How we do it
We lift the gate to relieve tension, cut or unbolt the old hinges, weld or bolt new ones in place, and re-align the gate so the latch meets the strike plate cleanly.
Custom Welding
Signs you need it
A crack has opened in a welded joint, a scroll or picket has broken off, or the gate frame has separated where the original weld was under-specified for the gate’s weight.
What it costs in Houston
Custom welding in Houston runs $285 to $900 per visit depending on the number of joints, the accessibility of the crack, and whether we need to remove and re-hang the gate leaf.
How we do it
We grind out the failed weld, lay a full-penetration bead with the correct rod for the metal, dress the joint, and photograph the repair before and after.
What Gate Parts & Welding Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Hinge replacement (each) | $85 - $260 |
| Custom welding (per visit) | $285 - $900 |
| Roller / track replacement | $400 - $1,100 |
Do you weld ornamental iron gates in Houston?
Yes. We weld ornamental iron, tubular steel, and custom gates, matching the original profile where we can and fabricating a replacement section when the part is no longer made. The written quote specifies the rod type and the joint locations.
Can you repair a rusted-through post in Houston’s climate?
In most cases we can plate or sleeve the post if the rust is localized, or re-set it with a wider concrete collar if the base has rotted through. We will tell you which repair is right for your gate before any work starts. Call (928) 260-0864 for a written assessment.
Brands We Service in Houston
We service Viking, DoorKing, Ghost Controls, and Elite motor and access-control equipment in Houston, with parts for most models stocked locally or available next-day. That means most motor repairs are completed in one visit rather than two. See the full list on our brands page.
Pricing for Gate Repair in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Swing-gate motor replacement | $1,150 - $2,600 |
| Slide-gate motor replacement | $1,900 - $3,900 |
| Motor repair (capacitor, limit switch, gear set) | $275 - $800 |
| Keypad replacement | $225 - $500 |
| Phone entry system | $500 - $1,100 |
| Control board replacement | $400 - $900 |
| Hinge replacement (each) | $85 - $260 |
| Custom welding (per visit) | $285 - $900 |
| Roller / track replacement | $400 - $1,100 |
Two things push Houston gate repair prices to the upper end of these ranges: posts that have shifted so far off plumb they must be re-set before the gate can work, and control boards corroded by years of humidity. Neither is a surprise you will discover on the invoice. Every price is written and handed to you before any work starts, under Clause 1 of our Haven Standard.
Neighborhoods We Serve in Houston
Our technicians work across Houston daily, from the gated subdivisions of Cinco Ranch and Sienna to the older estates of River Oaks, Memorial, and Tanglewood. Typical response time for gate motor failures is same-day in most areas, with next-morning availability for non-urgent repair and installation work.
- River Oaks
- Memorial
- Tanglewood
- Cinco Ranch
- Copperfield
Service Area - Cities Near Houston
In addition to Houston proper, our crews cover nearby communities for gate repair, motor work, and access control. We serve Pasadena, MD, Spring, TX, Pearland, TX, and Alief, TX with the same written-price, documented-work standard.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
For motor failures and gates stuck open or closed, we dispatch same-day in most Houston areas. A live person answers the phone 24/7, so you will speak to someone who can schedule a technician, not a voicemail system. Call (928) 260-0864 for the next available window.
Many Houston-area HOAs require approval for gate replacement but not for repair of existing equipment. If your subdivision requires documentation, our written quote and photo record usually satisfies the board’s request for evidence of the work done.
Yes. We install and repair waterproofed operator enclosures and replace flood-damaged control boards regularly in low-lying areas near Houston’s bayous. If your gate was submerged, we inspect the board, motor, and wiring before quoting any repair. Estimates are free.
Call (928) 260-0864 for a free estimate on any gate repair, motor, access control, or welding job in Houston. The price is written before the work starts, and the record is yours when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.