Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Collierville, TN
Gate motor and opener failures in Collierville follow a predictable pattern: a 20-year-old subdivision gate, heat-stressed wiring in brick pillar conduit, and a homeowner who needs the driveway working before the HOA sends a notice. Most motor replacements here run $650-$1,800 depending on the operator type, and we quote that range in writing before any tool leaves the truck. Call (928) 260-0864 and a person answers, day or night.
Why Collierville Homes Are Different
Collierville’s subdivision boom between the mid-1990s and late 2000s built thousands of large executive-style brick homes behind ornamental iron and aluminum driveway gates, most governed by HOAs that mandate decorative automation over utilitarian chain-link. That concentrated building window means a dense cohort of gate motors, hinges, and control boards are now reaching end-of-life at the same time. The Memphis basin’s expansive clay adds a second layer: wet winters swell the soil, dry summers shrink it, and gate posts heave and settle until the hinge geometry binds. We see the same sagging post on the same lot year after year in neighborhoods from Halle Plantation to Almadale Farms. Humidity hovering around 65% relative humidity most months keeps surface rust active on iron hardware, so Collierville gates need annual lubrication and rust treatment more than gates in drier parts of the state. And in July and August, when the heat index passes 105°F, the shallow underground conduit typical of 2000s-era subdivisions bakes the low-voltage wiring until thermal overload trips and control boards fail from heat stress, not mechanical wear. That combination of housing stock, soil movement, humidity, and heat is unique to Collierville’s development timeline, and it changes which parts fail and how often.
Our Main Collierville Services
Two services dominate the calls we get from Collierville homeowners: repairing existing automated gates and installing new ones when repair no longer makes sense. Both start the same way: a written price before work begins.
Gate Repair in Collierville
Most Collierville repair calls are binding hinges from clay-soil post movement, dead motors, or control boards baked in July heat. We diagnose the exact failure, document it with photos, and hand you a written price before we touch anything. See the full repair scope at Gate Repair in Collierville.
Gate Installation in Collierville
New installations in Collierville mean working around HOA design standards, existing brick pillars, and conduit runs that may need re-burial below the heat line. We quote the full scope in writing, including steel gauge, motor placement, and post depth for the clay. Details are on Gate Installation in Collierville.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Collierville
Collierville’s 1995-2015 housing stock put a lot of LiftMaster, FAAC, and Linear operators on brick pillars at the same time, and those motors are now failing in waves. The wet-dry clay cycle shifts the posts enough to strain motor mounts and strip gears, while the summer heat fries control boards in shallow conduit. We repair and replace operators across nine brands without steering you toward a replacement when a $180 board or limit switch fixes the problem. Our Gate Motor & Opener work covers the motor, the arm, the limit switches, and the wiring between them, all documented with before-and-after photos.
Motor Installation
Signs you need it
The motor hums but the gate doesn’t move, or the arm grinds against the post because the mount has shifted from clay-soil settlement.
What it costs in Collierville
A new swing-gate motor installation in Collierville typically runs $650-$1,500 depending on the brand and whether the post bracket is reusable.
How we do it
We remove the old operator, check the post for lean, set the new motor with shims if the post has moved, wire it to the existing conduit, and photograph the final limit-switch positions before testing the full cycle eight times.
Motor Repair
Signs you need it
The gate opens partway then reverses, or it waits five seconds before responding to the remote because the limit switch or capacitor is failing.
What it costs in Collierville
Motor repairs in Collierville cost $175-$450 for most limit switches, capacitors, and gear adjustments, with a written quote handed to you before we start.
How we do it
We read the limit-switch positions, test the capacitor under load, replace the failed part, reseal the housing against humidity, and leave a photo log of every setting we changed.
What Gate Motor & Opener Costs in Collierville
| Item | Typical range in Collierville |
|---|---|
| Swing-gate motor installation | $650-$1,500 |
| Motor repair (limit switch, capacitor, gear) | $175-$450 |
| Full operator replacement with arm | $900-$1,800 |
Can you replace a gate motor the same day in Collierville?
Usually yes, if the post hasn’t shifted enough to require resetting first. We carry common LiftMaster, FAAC, and Linear motors on the truck, and a person answers the phone 24/7 to schedule the dispatch. Call (928) 260-0864 for a written price before work starts.
Why did my Collierville gate motor fail in the heat?
Many subdivision conduits from the 2000s were run shallow without UV-rated insulation, and July heat indexes above 105°F overheat the low-voltage runs until the board trips or fails. Re-burying the conduit deeper fixes the recurring pattern. We’ll quote that work in writing.
Gate Access Control in Collierville
HOA-managed community entrances and private driveway gates in Collierville need access control that works with the existing gate operator, which is why we service nine brands instead of forcing an ecosystem swap. The high clay movement shifts pedestals and keypad mounts out of plumb, while summer heat pushes card readers and phone-entry boards into error states that look like total failures but are often a $120 part. Our Gate Access Control work covers keypads, remotes, phone entry, card readers, and intercom integration, with a wiring diagram left behind on every job.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, or the buttons stick after a humid August because the membrane has swollen.
What it costs in Collierville
Keypad entry installation in Collierville typically runs $250-$650 per keypad, including wiring to the existing operator.
How we do it
We run the low-voltage home run, mount the keypad on a plumb bracket, program the codes with the homeowner, and document the wiring colors with a labeled photo.
Remote Control
Signs you need it
The remote only works within ten feet, or it stopped working entirely after a power surge from a July thunderstorm.
What it costs in Collierville
Replacement remote programming in Collierville runs $75-$200 per remote, depending on the operator brand and whether the receiver survived.
How we do it
We test the receiver first, match the remote frequency to the operator, program the new remote, and hand you the written record of what was installed.
What Gate Access Control Costs in Collierville
| Item | Typical range in Collierville |
|---|---|
| Keypad entry installation | $250-$650 per keypad |
| Remote programming | $75-$200 per remote |
| Phone entry or card reader integration | $500-$1,800 |
Do you integrate with existing gate operators in Collierville?
Yes. We work with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the access control matches what’s already on the pillar. Call (928) 260-0864 for a written quote.
Can you add phone entry to my Collierville driveway gate?
Yes, if the gate has power and a clear sightline for the keypad or reader. Most phone-entry integrations run $500-$1,800 including the controller and wiring. We’ll photograph the existing operator and hand you a written scope before work begins.
Gate Parts & Welding in Collierville
Collierville’s iron and aluminum gates take a beating from the wet-dry clay cycle: hinges bind, posts lean, and rail welds crack at the stress points where the gate arm attaches. The humidity keeps surface rust active on raw iron, so hinge pins and weld seams need attention every year or two. Our Gate Parts & Welding work covers hinge replacement, post resetting, rail repair, and custom welding, with the part number and a photo of every weld left in your job record.
Hinge Replacement
Signs you need it
The gate scrapes the ground on the latch side, or the hinge pin has worn an oval hole because the post moved a half-inch over a dry summer.
What it costs in Collierville
Hinge replacement in Collierville runs $150-$400 per hinge, including re-shimming the gate to sit level on the shifted post.
How we do it
We cut off the old hinge, chisel the rust pocket clean, weld the new hinge in place with the gate blocked level, and photograph the weld before painting it.
Post Replacement
Signs you need it
The post leans more than an inch toward the gate, and you can see a gap between the post base and the concrete footer from the clay expansion.
What it costs in Collierville
Post replacement in Collierville costs $600-$1,500 per post, depending on depth and whether the footer needs re-pouring for the clay.
How we do it
We dig past the frost line, set the new post in concrete with a spread footer, brace it plumb, and check the gate swing before the concrete cures.
What Gate Parts & Welding Costs in Collierville
| Item | Typical range in Collierville |
|---|---|
| Hinge replacement | $150-$400 per hinge |
| Post replacement | $600-$1,500 per post |
| Rail repair or custom welding | $200-$800 |
How long does welding repair take on a Collierville gate?
Most weld repairs on rails and hinges are done in half a day, but painting and curing add another day in humid weather. We quote the full scope in writing before we start, including the weld rod and paint match. Call (928) 260-0864 for a free estimate.
Do you replace the post if the concrete footer is cracked?
Yes. Collierville’s clay soil expands and contracts enough to crack footers over time, and a cracked footer means the post will move again. We re-pour the footer with a spread base before setting the new post, and photograph each step.
Brands We Service in Collierville
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Common boards, limit switches, and capacitors are stocked in our metro Memphis office for same-week repairs. See our brands for the full list.
Pricing for Gate Repair in Collierville, TN
| Service | Typical range in Collierville |
|---|---|
| Swing-gate motor installation | $650-$1,500 |
| Motor repair (limit switch, capacitor, gear) | $175-$450 |
| Full operator replacement with arm | $900-$1,800 |
| Keypad entry installation | $250-$650 per keypad |
| Remote programming | $75-$200 per remote |
| Phone entry or card reader integration | $500-$1,800 |
| Hinge replacement | $150-$400 per hinge |
| Post replacement | $600-$1,500 per post |
| Rail repair or custom welding | $200-$800 |
Prices in Collierville shift upward when a post has moved enough to require resetting before the motor or hinge work can proceed at all, and when the HOA requires a specific finish or steel profile on ornamental iron. Every price is written down and handed to you before we start, under the Haven Standard Clause 1, so the number on the invoice matches the number you approved.
Neighborhoods We Serve in Collierville
We cover the full Collierville area with dispatch coordinated from the Memphis metro office. Most repair calls get a same-day or next-day response depending on part availability.
- Halle Plantation
- Almadale Farms
- Schilling Farms
- Braystone Park
- Rolling Meadows
Service Area - Cities Near Collierville
Our crews serve Collierville and the surrounding metro. We also cover Germantown, TN, Memphis, TN, and Spring Hill, TN, and we take gate calls in Franklin, IN for snowbird properties and second homes.
Serving Collierville, TN - Our Local Coverage Area
We’re based in the Collierville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Collierville
Most Collierville repair calls get a same-day or next-day dispatch, and a person answers the phone 24/7, so you’re never leaving a message at 2 a.m. with a gate stuck open. Part availability is the only thing that extends the timeline, and we stock common motors and boards in the Memphis office.
Many Collierville HOAs require approval for gate style changes but not for repair of an existing gate that keeps the same profile. We leave you a written record and photos of what was installed so you can provide documentation to the HOA board if they ask. Call (928) 260-0864 and we’ll walk through your specific rules.
You get a line-item scope: the part number, the labor, the time estimated, and the total price, handed to you before any work starts. Under the Haven Standard, the price you approve is the price you pay, with no surprise invoice after the gate is running. Each visit also includes a photographed record of what we found and what we changed.
Call (928) 260-0864 for a free estimate on any gate repair in Collierville. A person answers, the price is written before work begins, and every visit leaves a documented record with your name on it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Collierville Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.